K-80 Stock Bolt & Weight Balance System

£130.00
20% VAT incl.

Available Options

  • Model:K80STOCKWEIG
K-80 Stock Weight System - Bolt & Weight/s

The stock screw system is installed in the stock bolt access hole under the recoil pad. Installation is simple and involves only removing the original stock bolt and replacing it with the new longer stock bolt.
Please Note: Some stocks may have been shortened along with the stock bolt. To ensure you don't fit the new bolt and risk damaging your gun, please check the length of your existing bolt. You should not be exceeding 8 turns of the stock bolt when fitting. More than 8, feel free to contact us regarding shortening the bolt length.

The length of the longer stock bolt is 292mm.
Length of stock bolt from thread to mid piece is 168mm. This replacement bolt is designed to fit in place of existing stock bolts of 160mm in length.
The washers provide a slight amount of spring tension when tightening up the stock bolt. Please note the washer arrangement in the photo and the Stock Weight Instruction Sheet.

The balance screw carries an adjustable weight that can be positioned anywhere on the top section of the balance screw. The longer stock bolt itself weights an additional 40g in weight to the standard bolt and each weight adds another 30g. A possible 5 weights can be added to the longer stock bolt, totalling 150g. This added to the additional 40g of the stock bolt means you can add up to 190g to the rear end of the gun.

Also available for the K-80 Balance System are the K-80 Barrel Weights, combining both systems provides maximum flexibility in handling configuration.

There are different Options for purchasing:
- Stock Weight Screw with ONE Stock Weight
- Stock Weight Screw with TWO Stock Weights
- Additional Individual Weights are available.

We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)2 x Krieghoff HIVIZ Pro Sights2 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Starkie Blue (A.K.A Smurf Poo)1 x Krieghoff Trigger & Selector Locking Wrench1 x Krieghoff "K" Logo Cap Black & White1 x Parker Hale Thread to 8-32 Thread Converter1 x Krieghoff Brass Front Sight Bead2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Schultz & Larsen Professional Bipod by Spartan1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x WalkStool Comfort 65 (65cm/26in)1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Walkstool Steady1 x Briley 20b Speed Wrench - For Krieghoff1 x WalkStool Spare Leg Joints1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x WalkStool Set of Spare Red Spring1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Bauer HD Series 8x25 Binoculars1 x Bauer Outdoor 8x21 Binoculars1 x AG3 / 392A Alkaline Batteries (10 Pack)1 x Bauer Outdoor 10x25 Binoculars1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x K-80 Forward Position Trigger - Gold Titanium1 x K-80 Standard Trigger - Titanium1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x K-80 Standard Trigger - Steel1 x K-80 Forward Position Trigger - Gold Plated1 x Anschütz Biathlon Harness1 x K-80 Standard Trigger - Black Titanium1 x K-80 Forward Position Trigger - Steel1 x K-80 Standard Trigger - Gold Plated1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x K-80 Forward Position Trigger - Black Titanium1 x K-80 Forward Position Trigger - Titanium1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x K-80 Standard Trigger - Gold Titanium1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Gerber Metolius Pocket Folder1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Teague Precision Choke Key1 x Schmierfix Grease by Liqui Moly
Manufacturers
Useful Information