K-80 Stock Bolt & Weight Balance System

£130.00
20% VAT incl.

Available Options

  • Model:K80STOCKWEIG
K-80 Stock Weight System - Bolt & Weight/s

The stock screw system is installed in the stock bolt access hole under the recoil pad. Installation is simple and involves only removing the original stock bolt and replacing it with the new longer stock bolt.
Please Note: Some stocks may have been shortened along with the stock bolt. To ensure you don't fit the new bolt and risk damaging your gun, please check the length of your existing bolt. You should not be exceeding 8 turns of the stock bolt when fitting. More than 8, feel free to contact us regarding shortening the bolt length.

The length of the longer stock bolt is 292mm.
Length of stock bolt from thread to mid piece is 168mm. This replacement bolt is designed to fit in place of existing stock bolts of 160mm in length.
The washers provide a slight amount of spring tension when tightening up the stock bolt. Please note the washer arrangement in the photo and the Stock Weight Instruction Sheet.

The balance screw carries an adjustable weight that can be positioned anywhere on the top section of the balance screw. The longer stock bolt itself weights an additional 40g in weight to the standard bolt and each weight adds another 30g. A possible 5 weights can be added to the longer stock bolt, totalling 150g. This added to the additional 40g of the stock bolt means you can add up to 190g to the rear end of the gun.

Also available for the K-80 Balance System are the K-80 Barrel Weights, combining both systems provides maximum flexibility in handling configuration.

There are different Options for purchasing:
- Stock Weight Screw with ONE Stock Weight
- Stock Weight Screw with TWO Stock Weights
- Additional Individual Weights are available.

We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

2 x Krieghoff Pro Choke Box1 x Krieghoff Trigger Screw2 x Krieghoff Spares Kit1 x Krieghoff K80 Speed Wrench for Factory Chokes2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)3 x Krieghoff HIVIZ Pro Sights2 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x VFG Barrel Cleaning Felts for 9.3mm (Box of 500)1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint2 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)2 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Schultz & Larsen Professional Bipod by Spartan1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)2 x Krieghoff Navy Gun Slip2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Anschütz Biathlon Harness1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x VFG Barrel Cleaning Felts for 9mm (Box of 40)2 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)2 x VFG Pull Through Pocket Set for .22 Upwards2 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Barrel Cleaning Felts for 9mm (Box of 500)1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount2 x Krieghoff Brass Front Sight Bead1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)3 x Parker Hale Thread to 8-32 Thread Converter1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)3 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Recknagel Picatinny Rail Sako Long, Alu [..0114]2 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Recknagel Picatinny Rail Sako Short, Alu [..0014]1 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Contessa Picatinny Rail - CZ 452 / 455 (0 MOA)2 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x VFG Barrel Cleaning Felts for .45 (Box of 30)1 x VFG Barrel Cleaning Felts for .44 (Box of 30)1 x Krieghoff Stock Removal Wrench2 x Krieghoff Comb Wrench (T-Handle)1 x Recknagel Brass Front Sight Bead 2.5mm [11400-0250]1 x Krieghoff Woven Fabric Patch1 x Krieghoff Ejector Ball and Spring2 x Krieghoff K-80 Sport Logo Cap Black & Red1 x Krieghoff Sight Bead Blanking Screw1 x Black Barrel Case (83cm Internal)2 x Teague Precision Choke Key1 x Briley 20b Speed Wrench - For Krieghoff1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Krieghoff Choke Multi Wrench1 x Krieghoff .410g Choke Wrench1 x Krieghoff "K" Denim Cap - Navy1 x Krieghoff K80 Speed Wrench for KTW Chokes1 x Krieghoff "K" Logo Cap Black & White1 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x Gerber Gator Combo Replacement Saw1 x Schultz & Larsen Torx Key for Scope Mounts2 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Bauer Outdoor 10x25 Binoculars1 x VFG Intensive Barrel Cleaning Felts for .44 (Box of 30)1 x VFG Intensive Barrel Cleaning Felts for 16 Bore (Box of 25)1 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x Recknagel Weaver Bases - Winc. 70 Mag. >1964 [.-3025]1 x Schultz & Larsen Micro Moderator (Muzzle Mounted)1 x Krieghoff Front Sight Bead (Standard)1 x Krieghoff Trigger & Selector Locking Wrench1 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor1 x Recknagel Spare Ring Cap Screw M3.5 x 7.4mm [..0880]1 x VFG Magnetic Felt Clamps for Vices - 125mm1 x Recknagel SOB02 Silencer (Standard Thread)1 x Recknagel Spare Screw 6-48 x 7.7mm [..587T]1 x Jones Original Pad Adjuster1 x Krieghoff 12b Choke Wrench1 x EX Demo - Gerber Metolius Pocket Folder1 x Schultz & Larsen Superdome Moderator (Over Barrel)1 x Schultz & Larsen Ultradome Moderator (Over Barrel)1 x Recknagel Standard Banded Swivel Ring [22620-....]1 x VFG 3 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x Schultz & Larsen Thunderdome Moderator (Over Barrel)1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 500)1 x Bauer HD Series 8x25 Binoculars1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)1 x VFG Intensive Barrel Cleaning Felts for .45 (Box of 30)1 x Contessa Picatinny Rail - CZ 452 / 455 (20 MOA)1 x VFG Magnetic Felt Clamps for Vices - 100mm1 x Krieghoff Trap Special / Pro Rib Wheel Locking Wrench1 x Recknagel SECURA Safety for Remington 700 [30170-1200]1 x ERATAC Backup Front Sight for Picatinny, 1.35mm [T0543-0355]1 x Recknagel Fibre Optic Front Sight Bead 9.5mm [11024-4095]1 x VFG Adaptor for VFG Rods Brass1 x Ebony & Brass 20 Bore Snap Caps1 x Recknagel Weaver/Picatinny Mount for Aimpoint Micro [57020-1200]1 x Recknagel Blank 12mm Eurorail - 150mm1 x K-80 Standard Trigger - Titanium1 x Recknagel Zeiss Rail 45º Components - 6mm BH1 x Contessa QD Mount for HIK-Micro Panther (Picatinny)1 x K-80 Forward Position Trigger - Black Titanium1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (Tri-Nut)1 x Contessa Picatinny Rail - Tikka M690/M695 (0 MOA)1 x Jones Gun Nut Kit1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Contessa Quick Release Mount (Picatinny) for ATN X-Sight II1 x Krieghoff "K" Denim Cap - Grey1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes
Manufacturers
Useful Information