K-80 Stock Bolt & Weight Balance System

£130.00
20% VAT incl.

Available Options

  • Model:K80STOCKWEIG
K-80 Stock Weight System - Bolt & Weight/s

The stock screw system is installed in the stock bolt access hole under the recoil pad. Installation is simple and involves only removing the original stock bolt and replacing it with the new longer stock bolt.
Please Note: Some stocks may have been shortened along with the stock bolt. To ensure you don't fit the new bolt and risk damaging your gun, please check the length of your existing bolt. You should not be exceeding 8 turns of the stock bolt when fitting. More than 8, feel free to contact us regarding shortening the bolt length.

The length of the longer stock bolt is 292mm.
Length of stock bolt from thread to mid piece is 168mm. This replacement bolt is designed to fit in place of existing stock bolts of 160mm in length.
The washers provide a slight amount of spring tension when tightening up the stock bolt. Please note the washer arrangement in the photo and the Stock Weight Instruction Sheet.

The balance screw carries an adjustable weight that can be positioned anywhere on the top section of the balance screw. The longer stock bolt itself weights an additional 40g in weight to the standard bolt and each weight adds another 30g. A possible 5 weights can be added to the longer stock bolt, totalling 150g. This added to the additional 40g of the stock bolt means you can add up to 190g to the rear end of the gun.

Also available for the K-80 Balance System are the K-80 Barrel Weights, combining both systems provides maximum flexibility in handling configuration.

There are different Options for purchasing:
- Stock Weight Screw with ONE Stock Weight
- Stock Weight Screw with TWO Stock Weights
- Additional Individual Weights are available.

We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

2 x Krieghoff Woven Fabric Patch3 x Krieghoff HIVIZ Pro Sights2 x VFG Intensive Barrel Cleaning Felts for 8mm (Box of 50)2 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)2 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x Krieghoff Navy Gun Slip1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x Recknagel QD Sling Swivel - Fixed Standard [23000-0000]1 x Recknagel QD Sling Swivel Socket - Rotating, Flat [..-1010]1 x Recknagel Picatinny Rail Bergara B14 Short, Alu [..0012]2 x Schmierfix Grease by Liqui Moly1 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x Krieghoff "K" Denim Cap - Grey1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)3 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)2 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm2 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)2 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)2 x Parker Hale Thread to 8-32 Thread Converter2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm2 x Krieghoff Brass Front Sight Bead2 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Krieghoff Trigger Screw2 x Krieghoff Spares Kit1 x Krieghoff Pro Choke Box1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Schultz & Larsen T-Handle Wrench (4mm Hex)1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Anschütz Biathlon Harness1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Schultz & Larsen Professional Bipod by Spartan1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Barrel Cleaning Felts for 7mm (Box of 50)1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor2 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)1 x K-80 Stock Weight for Balance System1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x Krieghoff Brass Mid Sight Bead1 x Krieghoff 12b Choke Wrench1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x ERATAC Bubble Level [T0940-0002]1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Jones Original Pad Adjuster1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x MSA Sordin - Hygiene Kit - Foam Seals1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x WalkStool Set of Spare Red Spring1 x WalkStool Comfort 65 (65cm/26in)1 x Starkie Blue (A.K.A Smurf Poo)1 x AimZonic Plus Camo Sound Moderator1 x Black Barrel Case (83cm Internal)1 x WalkStool Spare Leg Joints1 x AimZonic Compact Camo Sound Moderator1 x Recknagel SOB3D Silencer (ERA LOC)1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Walkstool Steady2 x Bauer - Aluminium 11mm Dovetail 30mm Rings (14mm High)1 x Clearance Americase Cordura Case Cover (32x11x3")2 x Winchester 3" Folding Knife1 x Used Sako P94S, Wooden Stock (.22 LR)1 x Clearance Americase Cordura Case Cover (34.5x12x5")1 x Ex-Demo Contessa One Piece QD Picatinny Mount Body1 x LED Lenser Car Charger2 x EX Demo - Gerber Steady Tool (Phone Tripod)1 x LED Lenser Intelligent Filter Set with Holster1 x EX Demo - Gerber Metolius Pocket Folder1 x Gerber New Myth Series Pocket Folder1 x Ex-Demo Krieghoff K-20 1-Barrel Americase (No Cover)2 x Krieghoff "K" Mesh Cap - Black1 x Ex-Display Gerber GDC Zip Hex1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes2 x VFG Pull Through Pocket Set for .22 Upwards1 x VFG Magnetic Felt Clamps for Vices - 150mm1 x Gerber Gator Combo Replacement Saw1 x Gerber Metolius Pocket Folder1 x Black Leather Shell/Cartridge Pouch1 x Recknagel Front Ramp Hood ATV [13093-1810]1 x Recknagel Swarovski Rail Components for Optilock Base - 5mm BH1 x Recknagel SOB Silencer ERA LOC Thread Bushing1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Barrel Cleaning Felts for 10.3mm (Box of 30)1 x VFG Brass Adaptor for VFG Rod 4-4.5mm (Spare)1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 500)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x Recknagel One Piece Tip-off Picatinny Ring Mount [57030-5110]1 x K-80 Forward Position Trigger - Gold Plated1 x K-80 Standard Trigger - Black Titanium1 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 02 [8722]1 x Krieghoff C-Clips (E-Clips)1 x Krieghoff Front Sight Bead (Standard)1 x Contessa Picatinny Rail - Bergara B14 Short (0 MOA)1 x Contessa Picatinny Rail - Remington 700 Long Extended (0 MOA)1 x Krieghoff Achievement Badge 25 Straight1 x Schultz & Larsen Take Down Rifle Case1 x Contessa 35mm Rings for Simple Black - 7.5mm (High)1 x K-80 Standard Trigger - Gold Titanium1 x Krieghoff Factory Hanger Pin1 x Krieghoff 28b Choke Wrench1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Briley T Wrench for K-80 Parcours Briley Chokes
Manufacturers
Useful Information