K-80 Stock Bolt & Weight Balance System

£130.00
20% VAT incl.

Available Options

  • Model:K80STOCKWEIG
K-80 Stock Weight System - Bolt & Weight/s

The stock screw system is installed in the stock bolt access hole under the recoil pad. Installation is simple and involves only removing the original stock bolt and replacing it with the new longer stock bolt.
Please Note: Some stocks may have been shortened along with the stock bolt. To ensure you don't fit the new bolt and risk damaging your gun, please check the length of your existing bolt. You should not be exceeding 8 turns of the stock bolt when fitting. More than 8, feel free to contact us regarding shortening the bolt length.

The length of the longer stock bolt is 292mm.
Length of stock bolt from thread to mid piece is 168mm. This replacement bolt is designed to fit in place of existing stock bolts of 160mm in length.
The washers provide a slight amount of spring tension when tightening up the stock bolt. Please note the washer arrangement in the photo and the Stock Weight Instruction Sheet.

The balance screw carries an adjustable weight that can be positioned anywhere on the top section of the balance screw. The longer stock bolt itself weights an additional 40g in weight to the standard bolt and each weight adds another 30g. A possible 5 weights can be added to the longer stock bolt, totalling 150g. This added to the additional 40g of the stock bolt means you can add up to 190g to the rear end of the gun.

Also available for the K-80 Balance System are the K-80 Barrel Weights, combining both systems provides maximum flexibility in handling configuration.

There are different Options for purchasing:
- Stock Weight Screw with ONE Stock Weight
- Stock Weight Screw with TWO Stock Weights
- Additional Individual Weights are available.

We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x Recknagel Sling Swivel Screw (ø¸ 3mm) [20205-0022]1 x Recknagel Weaver Bases - Winc. 70 Mag. <1964 [.-3095]2 x Contessa 30mm Rings for Simple Black - 10.0mm (X-High)1 x Black Barrel Case (83cm Internal)3 x ERATAC Backup Rear Sight for Picatinny [T0544-0355]1 x Krieghoff Extended Pillars for Adjustable Comb1 x Gerber Myth Series Fixed Saw1 x Krieghoff Comb Wrench (T-Handle)1 x Recknagel Standard Banded Swivel Ring [22620-....]1 x Recknagel Super Express 1 Leaf Sight [15400-3025]1 x Recknagel Fibre Optic Front Sight Bead 8.5mm [11022-2585]2 x Krieghoff Sight Bead Blanking Screw1 x Recknagel Front Sight Bead White [11442-0300]1 x Contessa Picatinny Rail - Sako S20 (20 MOA)1 x K-80 Standard Trigger - Gold Titanium1 x K-80 Forward Position Trigger - Gold Plated2 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x K-80 Standard Trigger - Titanium2 x Jones Thru-the-Pad Adjuster1 x Recknagel SOB3D Silencer (ERA LOC)1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 02 [8717]1 x Contessa 35mm Rings for Simple Black - 7.5mm (High)1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat C1 [8280]2 x Jones Gun Nut Kit1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount1 x K-80 Standard Trigger - Gold Plated1 x Contessa Lightweight Alu Picatinny Rings - 36mm (8mm BH)1 x Recknagel Fixed Standing Window Sight 10mm [15111-2010]1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x ERATAC Backup Front Sight for Picatinny, 1.8mm [T0542-0355]1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x Recknagel Folding Front Sight Bead Ivory [11240-3565]1 x ERATAC Bubble Level [T0940-0002]1 x Krieghoff Steel Middle Hanger (For Parcours)1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x Contessa Picatinny Rail - Sauer 202 (0 MOA) Extended1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Short (20 MOA) Adjustable1 x VFG Complete Set for .1771 x Recknagel Leaf Sight 19mm [15235-3019]1 x Contessa Picatinny Rail - Sako S20 (0 MOA)2 x Jones Original Pad Adjuster1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]2 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 6mm Stud1 x Gerber Metolius Pocket Folder1 x Krieghoff Pro Choke Box2 x K-80 Barrel Weight Balance System1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)2 x Krieghoff Brass Mid Sight Bead1 x Bear Grylls Paracord Fixed Blade1 x K-80 Forward Position Trigger - Titanium1 x Contessa Spare Blaser Mounting Clamp Parts1 x K-80 Forward Position Trigger - Gold Titanium1 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor1 x Recknagel Sling Swivel Nut Screw (ø¸ 3.0mm) [20230-0022]1 x Clearance Americase Cordura Case Cover (32x11x3")1 x ERATAC Backup Front Sight for Picatinny, 1.35mm [T0543-0355]1 x Contessa Picatinny Rail - Sako S20 (0 MOA) - Extended1 x Krieghoff Fine Leather Gun Case (K-80 Parcours)1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud2 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x Badge - Cob Bronze1 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 100)1 x K-80 Standard Trigger - Black Titanium1 x Recknagel Barrel Banded Front Ramp [12530-....]1 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)1 x VFG Barrel Cleaning Felts for 9.3mm (Box of 40)1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 04 [8332]
Manufacturers
Useful Information