K-80 Stock Bolt & Weight Balance System

£130.00
20% VAT incl.

Available Options

  • Model:K80STOCKWEIG
K-80 Stock Bolt & Weight Balance System
K-80 Stock Weight System - Bolt & Weight/s

The stock screw system is installed in the stock bolt access hole under the recoil pad. Installation is simple and involves only removing the original stock bolt and replacing it with the new longer stock bolt.
Please Note: Some stocks may have been shortened along with the stock bolt. To ensure you don't fit the new bolt and risk damaging your gun, please check the length of your existing bolt. You should not be exceeding 8 turns of the stock bolt when fitting. More than 8, feel free to contact us regarding shortening the bolt length.

The length of the longer stock bolt is 292mm.
Length of stock bolt from thread to mid piece is 168mm. This replacement bolt is designed to fit in place of existing stock bolts of 160mm in length.
The washers provide a slight amount of spring tension when tightening up the stock bolt. Please note the washer arrangement in the photo and the Stock Weight Instruction Sheet.

The balance screw carries an adjustable weight that can be positioned anywhere on the top section of the balance screw. The longer stock bolt itself weights an additional 40g in weight to the standard bolt and each weight adds another 30g. A possible 5 weights can be added to the longer stock bolt, totalling 150g. This added to the additional 40g of the stock bolt means you can add up to 190g to the rear end of the gun.

Also available for the K-80 Balance System are the K-80 Barrel Weights, combining both systems provides maximum flexibility in handling configuration.

There are different Options for purchasing:
- Stock Weight Screw with ONE Stock Weight
- Stock Weight Screw with TWO Stock Weights
- Additional Individual Weights are available.

We Can Only Accept Orders from UK & Ireland Only
 Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

K-80 Forward Position Trigger - Titanium
K-80 Forward Position Trigger - Titanium
£320.00
20% VAT incl.
View
Krieghoff Sight Bead Blanking Screw
Krieghoff Sight Bead Blanking Screw
£1.00
20% VAT incl.
View
Krieghoff Trigger & Selector Locking Wrench
Krieghoff Trigger & Selector Locking Wrench
£1.50
20% VAT incl.
View
Krieghoff Safety Catch Locking Screw Wrench
Krieghoff Safety Catch Locking Screw Wrench
£1.50
20% VAT incl.
View
Quick Find
or Search Keywords in
Advanced Search
Shopping Cart
2 x Krieghoff Pro Choke Box1 x Krieghoff Spares Kit2 x Krieghoff HIVIZ Pro Sights1 x Schultz & Larsen Professional Bipod by Spartan2 x Anschütz Biathlon Harness1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x Schultz & Larsen Picatinny Rail for Classic DL (0 MOA)1 x VFG Barrel Cleaning Felts for 7mm (Box of 50)1 x VFG Adaptor for Parker Hale English Rods (over 7mm)3 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)3 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set2 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Krieghoff Comb Wrench (T-Handle)2 x Gerber Myth Series Fixed Saw1 x Krieghoff Navy Gun Slip1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Ex-Display Gerber GDC Zip Hex1 x Gerber GDC Zip Blade2 x Krieghoff Stock Removal Wrench1 x Krieghoff Woven Fabric Patch1 x Schultz & Larsen Torx Key for Scope Mounts1 x Gerber Basic Fixed Blade Serrated1 x Krieghoff Factory Hanger Pin2 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Gerber Gator Combo Replacement Saw1 x Teague Precision Choke Key1 x VFG Magnetic Felt Clamps for Vices - 150mm3 x Schmierfix Grease by Liqui Moly3 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes2 x Briley 20b Speed Wrench - For Krieghoff1 x VFG Magnetic Felt Clamps for Vices - 100mm1 x Krieghoff Safety Catch Locking Screw Wrench1 x Krieghoff Brass Front Sight Bead1 x Krieghoff .410g Choke Wrench1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x Krieghoff K80 Speed Wrench for KTW Chokes1 x Krieghoff Trap Special / Pro Rib Wheel Locking Wrench1 x Black Barrel Case (83cm Internal)2 x Jones Original Pad Adjuster1 x Krieghoff 12b Choke Wrench1 x Krieghoff Choke Multi Wrench1 x VFG Magnetic Felt Clamps for Vices - 125mm1 x VFG Magnetic Felt Clamps for Vices - 80mm2 x Krieghoff Sight Bead Blanking Screw1 x K-80 Stock Weight for Balance System2 x Ebony & Brass 20 Bore Snap Caps1 x Krieghoff 28b Choke Wrench1 x Contessa Quick Release Mount (Euro Rail) for ATN X-Sight II1 x Schultz & Larsen Venom Moderator (Over Barrel)1 x Schultz & Larsen Superdome Moderator (Over Barrel)1 x Contessa Quick Release Mount for Zeiss Rail1 x Contessa Spare Blaser Mounting Clamp Parts1 x Krieghoff Brass Mid Sight Bead1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)2 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x Schultz & Larsen Thunderdome Moderator (Muzzle Mounted)1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x Contessa QD Low Mount for Pulsar Night Vision (Euro Rail)1 x Schultz & Larsen Ultradome Moderator (Over Barrel)1 x Contessa Picatinny Rail - Sako S20 (0 MOA)1 x Contessa QD Mount for ATN 4K Night Vision (Picatinny)1 x Contessa Blued Steel Picatinny Rings - 35mm (8mm BH)1 x Contessa Satin Chromed Steel Picatinny Rings - 30mm (8mm BH)1 x Contessa Tactical One Piece QD Picatinny Ring Mount - 40mm1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Jones Gun Nut Kit1 x Contessa Blued Steel Picatinny Rings - 1" (8mm BH)1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x Contessa Picatinny Rail - Bergara B14 Long (0 MOA)1 x Contessa Lightweight Alu Picatinny Rings - 36mm (8mm BH)1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA) Extended1 x Recknagel Weaver Bases - Winc. 70 Mag. >1964 [.-3025]1 x Contessa Picatinny Rail - Anschutz 54 Only (10 MOA)1 x Krieghoff Extended Pillars for Adjustable Comb1 x Contessa One Piece QD Extended Picatinny Rail Mount1 x AimZonic Plus Camo Sound Moderator1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Recknagel Standard Banded Swivel Ring [22620-....]1 x AimZonic Compact Camo Sound Moderator1 x Contessa Blued Steel Tactical Picatinny Rings - 30mm (10mm BH)1 x Contessa Tactical One Piece QD Picatinny Ring Mount 30mm, 0 MOA1 x Contessa Satin Chromed Steel Picatinny Rings - 1" (8mm BH)1 x Parker Hale Thread to 8-32 Thread Converter1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Contessa One Piece QD Picatinny Mount for Zeiss Rail2 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Contessa Picatinny Rail - Anschutz 54/64 (10 MOA)1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x MSA Sordin - Hygiene Kit - Foam Seals1 x WalkStool Spare Leg Joints1 x Contessa Lightweight Alu Picatinny Rings - 1 Inch (8mm BH)1 x Jones Thru-the-Pad Adjuster1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x ERATAC QD Sling Swivel - Loop Swivel [T0510-0001]1 x Recknagel Weaver Bases - Winc. 70 Mag. <1964 [.-3095]1 x Contessa Tactical One Piece QD Picatinny Ring Mount 40mm, 0 MOA1 x Contessa 30mm Steel 11mm Dovetail Rings, 16mm BH1 x K-80 Forward Position Trigger - Gold Plated1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x Contessa Shiny Chromed Picatinny Rail - Remington 700 Long (0 MO1 x Contessa Satin Chromed Picatinny Rail - Sako 85 XS (10 MOA)1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Recknagel Steel Stock Trap Door1 x ERATAC Backup Front Sight for Picatinny, 1.35mm [T0543-0355]1 x Starkie Blue (A.K.A Smurf Poo)1 x K-80 Standard Trigger - Black Titanium1 x Contessa Shiny Chromed Picatinny Rail - Howa Short (10 MOA)1 x Recknagel Ring Base for Rear Sight [16550-0185]1 x Recknagel SECURA Sling Swivel - 25.4mm Wide - 6mm [22009-3000]1 x Recknagel Grip Cap Skeleton Pointed [24060-0200]1 x Krieghoff Front Sight Bead (Small)1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Long (0 MOA) Adjustable1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Recknagel Leaf Sight 19mm [15235-3019]1 x Recknagel Front Sight Bead White [11442-0300]1 x Contessa Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x Recknagel Barrel Banded Front Ramp [12530-....]1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Long (20 MOA)1 x K-80 Forward Position Trigger - Titanium1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Long (10 MOA)1 x Contessa 30mm Rings for Simple Black - 10.0mm (X-High)1 x Contessa 34mm Rings for Simple Black - 8.0mm (Medium)1 x Recknagel Brass Front Sight Bead 2.5mm [11400-0250]1 x Recknagel Front Sight Bead Red [11444-0300]1 x Contessa Shiny Chromed Picatinny Rail - Howa Long (0 MOA)1 x K-80 Forward Position Trigger - Black Titanium1 x Contessa Satin Chromed Picatinny Rail - Sako 85 XS (20 MOA)1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x Contessa Satin Chromed Picatinny Rail - Howa Short (0 MOA)1 x Contessa 36mm Rings for Simple Black - 5.0mm (Low)1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes
£18,887.51
Manufacturers
Useful Information
Picatinny Rail Finder
Bestsellers
Kick-Eez All Purpose Pad (301) Recoil Pad Spacer (1/4" or 1/8" Thick) K-80 Barrel Weight Balance System