K-80 Stock Bolt & Weight Balance System

£130.00
20% VAT incl.

Available Options

  • Model:K80STOCKWEIG
K-80 Stock Weight System - Bolt & Weight/s

The stock screw system is installed in the stock bolt access hole under the recoil pad. Installation is simple and involves only removing the original stock bolt and replacing it with the new longer stock bolt.
Please Note: Some stocks may have been shortened along with the stock bolt. To ensure you don't fit the new bolt and risk damaging your gun, please check the length of your existing bolt. You should not be exceeding 8 turns of the stock bolt when fitting. More than 8, feel free to contact us regarding shortening the bolt length.

The length of the longer stock bolt is 292mm.
Length of stock bolt from thread to mid piece is 168mm. This replacement bolt is designed to fit in place of existing stock bolts of 160mm in length.
The washers provide a slight amount of spring tension when tightening up the stock bolt. Please note the washer arrangement in the photo and the Stock Weight Instruction Sheet.

The balance screw carries an adjustable weight that can be positioned anywhere on the top section of the balance screw. The longer stock bolt itself weights an additional 40g in weight to the standard bolt and each weight adds another 30g. A possible 5 weights can be added to the longer stock bolt, totalling 150g. This added to the additional 40g of the stock bolt means you can add up to 190g to the rear end of the gun.

Also available for the K-80 Balance System are the K-80 Barrel Weights, combining both systems provides maximum flexibility in handling configuration.

There are different Options for purchasing:
- Stock Weight Screw with ONE Stock Weight
- Stock Weight Screw with TWO Stock Weights
- Additional Individual Weights are available.

We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

1 x Krieghoff "K" Denim Cap - Grey1 x Krieghoff Woven Fabric Patch4 x Krieghoff HIVIZ Pro Sights1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)2 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Schultz & Larsen Professional Bipod by Spartan1 x Anschütz Biathlon Harness1 x Krieghoff Pro Choke Box1 x Krieghoff Trigger Screw4 x Krieghoff Spares Kit2 x Krieghoff K80 Speed Wrench for Factory Chokes1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x ERATAC Offset UNI-Interface Picatinny Rail [T0913-0000]1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)2 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x Parker Hale Thread to 8-32 Thread Converter2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Krieghoff Navy Canvas Gun Slip2 x Contessa Picatinny Rail - Sauer 404 (0 MOA)2 x Krieghoff Brass Front Sight Bead2 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Krieghoff Extended Pillars for Adjustable Comb1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm3 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Krieghoff 12b Choke Wrench1 x Krieghoff K80 Speed Wrench for KTW Chokes2 x K-80 Stock Weight for Balance System1 x Krieghoff Brass Mid Sight Bead1 x Black Barrel Case (83cm Internal)1 x Briley 20b Speed Wrench - For Krieghoff1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]3 x Schmierfix Grease by Liqui Moly1 x Krieghoff Trigger & Selector Locking Wrench1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Starkie Blue (A.K.A Smurf Poo)1 x Krieghoff Stock Removal Wrench1 x Krieghoff Safety Catch Locking Screw Wrench1 x Krieghoff 28b Choke Wrench1 x Krieghoff Comb Wrench (T-Handle)1 x ERATAC Bubble Level [T0940-0002]1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x Krieghoff C-Clips (E-Clips)1 x Krieghoff Choke Multi Wrench1 x Krieghoff .410g Choke Wrench1 x Teague Precision Choke Key1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Krieghoff Trap Special / Pro Rib Wheel Locking Wrench1 x K-80 Standard Trigger - Gold Plated1 x AimZonic Compact Camo Sound Moderator1 x Krieghoff Shell Bag1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Krieghoff Ejector Ball and Spring1 x K-80 Forward Position Trigger - Titanium1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8034]1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8336]1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8335]1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat C1 [8280]1 x Recknagel SOB3D Silencer (Standard Thread)1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 03 [8733]1 x Krieghoff Fine Leather Gun Case (K-80 Parcours)1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x Recknagel SOB3D Silencer (ERA LOC)1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 02 [8717]1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Krieghoff 2018 DTL Badge (Collectors Badge)1 x Jones Thru-the-Pad Adjuster1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8244]
Manufacturers
Useful Information