K-80 Stock Bolt & Weight Balance System

£130.00
20% VAT incl.

Available Options

  • Model:K80STOCKWEIG
K-80 Stock Weight System - Bolt & Weight/s

The stock screw system is installed in the stock bolt access hole under the recoil pad. Installation is simple and involves only removing the original stock bolt and replacing it with the new longer stock bolt.
Please Note: Some stocks may have been shortened along with the stock bolt. To ensure you don't fit the new bolt and risk damaging your gun, please check the length of your existing bolt. You should not be exceeding 8 turns of the stock bolt when fitting. More than 8, feel free to contact us regarding shortening the bolt length.

The length of the longer stock bolt is 292mm.
Length of stock bolt from thread to mid piece is 168mm. This replacement bolt is designed to fit in place of existing stock bolts of 160mm in length.
The washers provide a slight amount of spring tension when tightening up the stock bolt. Please note the washer arrangement in the photo and the Stock Weight Instruction Sheet.

The balance screw carries an adjustable weight that can be positioned anywhere on the top section of the balance screw. The longer stock bolt itself weights an additional 40g in weight to the standard bolt and each weight adds another 30g. A possible 5 weights can be added to the longer stock bolt, totalling 150g. This added to the additional 40g of the stock bolt means you can add up to 190g to the rear end of the gun.

Also available for the K-80 Balance System are the K-80 Barrel Weights, combining both systems provides maximum flexibility in handling configuration.

There are different Options for purchasing:
- Stock Weight Screw with ONE Stock Weight
- Stock Weight Screw with TWO Stock Weights
- Additional Individual Weights are available.

We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

2 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x Krieghoff Woven Fabric Patch1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)1 x Krieghoff "K" Denim Cap - Grey1 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x Winchester 3" Folding Knife1 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x VFG Intensive Barrel Cleaning Felts for 8mm (Box of 50)4 x Krieghoff HIVIZ Pro Sights2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable3 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Schultz & Larsen Professional Bipod by Spartan3 x Parker Hale Thread to 8-32 Thread Converter3 x Krieghoff Brass Front Sight Bead1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Anschütz Biathlon Harness2 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x VFG Barrel Cleaning Felts for 9mm (Box of 500)1 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master2 x VFG Barrel Cleaning Felts for 8.5mm (Box of 500)1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x VFG Pull Through Pocket Set for .22 Upwards1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)2 x Krieghoff Navy Canvas Gun Slip1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Schmierfix Grease by Liqui Moly1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)3 x Krieghoff Spares Kit1 x Krieghoff Trigger Screw1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x Schultz & Larsen T-Handle Wrench (4mm Hex)1 x Schultz & Larsen Torx Key for Scope Mounts1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x VFG Magnetic Felt Clamps for Vices - 150mm1 x Krieghoff Pro Choke Box1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x Black Barrel Case (83cm Internal)1 x Starkie Blue (A.K.A Smurf Poo)1 x Black Leather Shell/Cartridge Pouch1 x VFG Complete Set for .1771 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x VFG Barrel Cleaning Felts for 10.3mm (Box of 30)1 x Krieghoff 28b Choke Wrench1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Krieghoff "K" Logo Cap Black & White1 x VFG Magnetic Felt Clamps for Vices - 100mm1 x Krieghoff Choke Multi Wrench1 x WalkStool Comfort 65 (65cm/26in)1 x Krieghoff .410g Choke Wrench1 x VFG Barrel Cleaning Felts for 9mm (Box of 40)1 x VFG Barrel Cleaning Felts for .375 (Box of 500)1 x K-80 Stock Weight for Balance System1 x Briley 20b Speed Wrench - For Krieghoff1 x Walkstool Steady1 x Bauer HD Series 8x25 Binoculars1 x VFG 3 Piece Aluminium Cleaning Rod for 7mm and Over, + Adaptor
Manufacturers
Useful Information