K-80 Stock Bolt & Weight Balance System

£130.00
20% VAT incl.

Available Options

  • Model:K80STOCKWEIG
K-80 Stock Bolt & Weight Balance System
K-80 Stock Weight System - Bolt & Weight/s

The stock screw system is installed in the stock bolt access hole under the recoil pad. Installation is simple and involves only removing the original stock bolt and replacing it with the new longer stock bolt.
Please Note: Some stocks may have been shortened along with the stock bolt. To ensure you don't fit the new bolt and risk damaging your gun, please check the length of your existing bolt. You should not be exceeding 8 turns of the stock bolt when fitting. More than 8, feel free to contact us regarding shortening the bolt length.

The length of the longer stock bolt is 292mm.
Length of stock bolt from thread to mid piece is 168mm. This replacement bolt is designed to fit in place of existing stock bolts of 160mm in length.
The washers provide a slight amount of spring tension when tightening up the stock bolt. Please note the washer arrangement in the photo and the Stock Weight Instruction Sheet.

The balance screw carries an adjustable weight that can be positioned anywhere on the top section of the balance screw. The longer stock bolt itself weights an additional 40g in weight to the standard bolt and each weight adds another 30g. A possible 5 weights can be added to the longer stock bolt, totalling 150g. This added to the additional 40g of the stock bolt means you can add up to 190g to the rear end of the gun.

Also available for the K-80 Balance System are the K-80 Barrel Weights, combining both systems provides maximum flexibility in handling configuration.

There are different Options for purchasing:
- Stock Weight Screw with ONE Stock Weight
- Stock Weight Screw with TWO Stock Weights
- Additional Individual Weights are available.

We Can Only Accept Orders from UK & Ireland Only
 Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

K-80 Forward Position Trigger - Titanium
K-80 Forward Position Trigger - Titanium
£320.00
20% VAT incl.
View
Krieghoff Sight Bead Blanking Screw
Krieghoff Sight Bead Blanking Screw
£1.00
20% VAT incl.
View
Krieghoff Trigger & Selector Locking Wrench
Krieghoff Trigger & Selector Locking Wrench
£1.50
20% VAT incl.
View
Krieghoff Safety Catch Locking Screw Wrench
Krieghoff Safety Catch Locking Screw Wrench
£1.50
20% VAT incl.
View
Quick Find
or Search Keywords in
Advanced Search
Shopping Cart
2 x Krieghoff HIVIZ Pro Sights2 x Krieghoff Woven Fabric Patch2 x K-80 Stock Weight for Balance System1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x K-80 Forward Position Trigger - Titanium1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Krieghoff 2018 DTL Badge (Collectors Badge)1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x K-80 Standard Trigger - Gold Titanium2 x Krieghoff Spares Kit1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x K-80 Standard Trigger - Titanium1 x Bauer Outdoor 8x21 Binoculars1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x K-80 Forward Position Trigger - Gold Plated1 x Krieghoff Front Sight Bead (Standard)1 x Krieghoff Factory Hanger Pin1 x K-80 Forward Position Trigger - Black Titanium1 x K-80 Forward Position Trigger - Steel2 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Jones Thru-the-Pad Adjuster1 x Krieghoff K80 Speed Wrench for KTW Chokes1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Briley T Wrench for K-80 Parcours Briley Chokes2 x Krieghoff Extended Pillars for Adjustable Comb1 x Krieghoff "K" Collectors Badge1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Schmierfix Grease by Liqui Moly1 x Krieghoff Brass Front Sight Bead1 x Krieghoff Ejector Ball and Spring1 x K-80 Standard Trigger - Gold Plated1 x K-80 Standard Trigger - Black Titanium1 x Krieghoff Comb Wrench (T-Handle)2 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Krieghoff Stock Removal Wrench1 x Krieghoff .410g Choke Wrench1 x Jones Gun Nut Kit1 x K-80 Standard Trigger - Steel1 x Krieghoff Trigger Screw1 x Briley 20b Speed Wrench - For Krieghoff1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Krieghoff 12b Choke Wrench2 x K-80 Barrel Weight Balance System1 x Krieghoff 28b Choke Wrench1 x Krieghoff Trap Special / Pro Rib Wheel Locking Wrench1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x K-80 Forward Position Trigger - Gold Titanium1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail
£7,542.60
Manufacturers
Useful Information
Picatinny Rail Finder
Bestsellers
Kick-Eez All Purpose Pad (301) Recoil Pad Spacer (1/4" or 1/8" Thick) K-80 Barrel Weight Balance System