K-80 Forward Position Trigger - Steel

£167.00
20% VAT incl.


  • Model:TRIG-FN


This Forward position Model is for those shooters who need the trigger blade positioned further forward than is possible with the adjustment on the standard trigger.

The Trigger fits all new model K-80 guns that have the trigger blade attached on a T-slot rail. Earlier guns had a dovetail. If you wish to fit a short trigger on an earlier gun then you will also need a trigger upgrade. This can be done in our Krieghoff Service facility.

Normally we recommend that you send the receiver of your gun to have the trigger fitted. It is possible to fit the new blade yourself but please note the following procedure by reading the installation procedure.

Model: Nickel Finish

The Trigger Pulls differ between a Standard Trigger and a Forward Position Trigger. The forward position trigger is 1/4 lb heavier.

Fitting:

The K80 trigger blade is adjustable for position along a slide. There are two set screws on the underside of the trigger blade. The screw socket takes a 1.27mm wrench, 0.050" or 1/20th inch imperial. Use a Krieghoff Trigger/Selector Wrench. The rearmost screw locks the blade onto the slide whilst the front screw locks the barrel selector positioned immediately in front of the trigger blade. There are two trigger blade types, standard position and forward position. The standard blade has both screws in front of the curved blade whilst the forward position trigger has one screw in front and one directly behind the blade. Function of the two screws is the same.

To move the trigger blade, slacken the rear screw but note that the front screw, if locked, will also lock the trigger blade. The front screw has to be far enough out to allow the blade to slide so if it will not move try backing that screw out some more. Occasionally, the blade will be stuck on the slide but is easily freed with a nylon drift. Make sure both screws are free before tapping the blade with anything. Once in position, tighten the rearmost screw to lock the blade on the slide.

To lock the selector, tighten the front screw until the selector cannot be switched left to right. To release the selector, simply slacken that screw off again.

We do not keep a large quantity of this product in stock. This part may need to be ordered in from the Krieghoff Factory. Please allow 5-10 working days for delivery.

We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.


Watch the Trigger Replacement Instructional Video here:
2 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)1 x Krieghoff "K" Denim Cap - Grey2 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x Winchester 3" Folding Knife1 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x VFG Intensive Barrel Cleaning Felts for 8mm (Box of 50)5 x Krieghoff HIVIZ Pro Sights2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable3 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Schultz & Larsen Professional Bipod by Spartan4 x Parker Hale Thread to 8-32 Thread Converter4 x Krieghoff Brass Front Sight Bead1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Anschütz Biathlon Harness2 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x VFG Barrel Cleaning Felts for 9mm (Box of 500)2 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master2 x VFG Barrel Cleaning Felts for 8.5mm (Box of 500)1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x VFG Pull Through Pocket Set for .22 Upwards1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)2 x Krieghoff Navy Canvas Gun Slip1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint2 x Schmierfix Grease by Liqui Moly1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)4 x Krieghoff Spares Kit2 x Krieghoff Trigger Screw1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x Schultz & Larsen T-Handle Wrench (4mm Hex)1 x Schultz & Larsen Torx Key for Scope Mounts1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x VFG Magnetic Felt Clamps for Vices - 150mm1 x Krieghoff Pro Choke Box1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x Black Barrel Case (83cm Internal)1 x Starkie Blue (A.K.A Smurf Poo)1 x Black Leather Shell/Cartridge Pouch1 x VFG Complete Set for .1771 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x VFG Barrel Cleaning Felts for 10.3mm (Box of 30)1 x Krieghoff 28b Choke Wrench1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Krieghoff "K" Logo Cap Black & White1 x VFG Magnetic Felt Clamps for Vices - 100mm1 x Krieghoff Choke Multi Wrench1 x WalkStool Comfort 65 (65cm/26in)1 x Krieghoff .410g Choke Wrench1 x VFG Barrel Cleaning Felts for 9mm (Box of 40)1 x VFG Barrel Cleaning Felts for .375 (Box of 500)2 x K-80 Stock Weight for Balance System2 x Briley 20b Speed Wrench - For Krieghoff1 x Walkstool Steady1 x Bauer HD Series 8x25 Binoculars1 x VFG 3 Piece Aluminium Cleaning Rod for 7mm and Over, + Adaptor1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x Recknagel SOB3D Silencer (Standard Thread)1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x VFG 1 Piece Steel Short Cleaning Rod with 4-4.5mm (.177) Adaptor1 x Schultz & Larsen Take Down Rifle Case1 x VFG Pull Through Match Pocket Set, for 4-4.5mm1 x Krieghoff C-Clips (E-Clips)1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 02 [8717]1 x K-80 Barrel Weight Balance System1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x VFG 3 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x Krieghoff Front Sight Bead (Standard)1 x VFG 1 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor1 x Krieghoff Ejector Ball and Spring1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Krieghoff Front Sight Bead (Small)1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8244]1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Jones Original Pad Adjuster1 x VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x Krieghoff 2018 DTL Badge (Collectors Badge)
Manufacturers
Useful Information