Contessa QD Mount for Blaser R8/R93 for Swarovski Rail

£375.13
20% VAT incl.


  • Model:SBB05
Contessa QD Mount for Blaser R8/R93 for Swarovski Rail
Contessa Quick Release Mount for Blaser for Swarovski Rail

Rail Length - 116mm
Height (BH) - 12mm
Weight - 199g
Code - SBB05
Fits Models - R8, R93

Materials:
- Non Moving Parts: Hard Anodised Light Alloy called Ergal 7075
- Moving Parts: Hardened Compound Steel

These scope mounts are designed specifically for Blaser by Contessa Alessandro, Italy. The mounts fit the Blaser R8 & R93 bolt action rifles.

The quick release mount design to fit the Swarovski Rail Mounts. The Contessa mount has windage adjustment if required and is locked/released with a single side lever that works on both lugs at the same time. The quality and finish of the mount is extremely high. Return to zero is guaranteed.

Simple to install at home with the supplied fitting tools. For additional instructions, view the Contessa Adjustment Screw Instructions for Blaser Mounts Here.

Other Blaser Mounts by Contessa:
Contessa Picatinny Rail, 0 MOA,
Contessa Extended Picatinny Rail, 0 MOA,
Contessa Extended Picatinny Rail, 20 MOA,
Contessa Quick Release Mount for Blaser with Rings,
Contessa Quick Release Mount for Blaser with Extended Picatinny Rail
Contessa Quick Release Mount for Blaser for Zeiss Rail

This QD system allows you to interchange multiple scopes on a single rifle, and even change a single scope to different rifles in seconds using the Contessa system. To see the other available Contessa mounting parts - Click Here




The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.
Quick Find
or Search Keywords in
Advanced Search
Shopping Cart
3 x VFG 3 Piece Aluminium Cleaning Rod for 7mm and Over, + Adaptor3 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor2 x VFG 1 Piece Steel Short Cleaning Rod with 4-4.5mm (.177) Adaptor2 x VFG 3 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor2 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor2 x VFG 1 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor2 x VFG Pull Through Pocket Set for .22 Upwards2 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor3 x VFG Pull Through Match Pocket Set, for 4-4.5mm2 x VFG 3 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x VFG Magnetic Felt Clamps for Vices - 150mm2 x Parker Hale Thread to 8-32 Thread Converter1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x VFG Barrel Cleaning Felts for .44 (Box of 250)3 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)2 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x Bear Grylls Scout Essentials Kit1 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)1 x VFG Barrel Cleaning Felts for 9mm (Box of 500)1 x Recknagel Picatinny Rail Marlin 1895 / 336, Alu [..001S]1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Recknagel Picatinny Rail CZ 550 Magnum, Alu [..0064]1 x Krieghoff Sight Bead Blanking Screw1 x Recknagel Swarovski Rail Components for Optilock Base - 5mm BH1 x Recknagel Picatinny Bases - Schultz & Larsen1 x Recknagel One Piece Tip-off Mounts for Swarovski [57553-0110]1 x Recknagel Weaver/Picatinny Mounts for Zeiss Rail 45º (Tri-Nut)1 x Recknagel Zeiss Rail 45º Components - 6mm BH1 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 25)1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Bear Grylls Ultra Compact Knife
£3,148.62
Manufacturers
Useful Information
Picatinny Rail Finder
Bestsellers
Contessa Quick Release Mount (Picatinny) for ATN X-Sight II Recknagel Weaver/Picatinny Mounts for Zeiss 45º (QD Lever) Recknagel Weaver/Picatinny Mounts for Swarovski Rail (QD Lever)