Contessa QD Mount for ATN 4K Night Vision (Picatinny)

£390.31
20% VAT incl.


  • Model:SBP10
Contessa QD Mount for ATN 4K Night Vision (Picatinny)
Contessa, Quick Detachable Mount for Picatinny
Designed for the ATN 4K Night Vision Scope

Length: 160mm
Length of Picatinny on Ring Cap: 35mm
Height with Rings (BH): 18.5mm
Height without Rings (BH): 12.5mm
Weight: 275g
Code: SBP10
Extends Backwards from Rear Lug: 65mm
Distance Between Rings: 109mm

Materials:
- Non Moving Parts: Hard Anodised Light Alloy called Ergal 7075
- Moving Parts: Hardened Compound Steel
- Complete with screws for mounting the Pulsar

The Contessa Quick Release Mount for ATN 4K features two 30mm Rings spaced perfectly apart to be able to mount the scope. The front ring has a Universal Interface Ring Cap with a 35mm Picatinny Rail offset to the one side, to be able to mount a UV Lamp. This ring cap can be swapped with the rear ring cap and the section of picatinny mounted to the right of left side.

The mount will fit any existing picatinny rail and uses a solid recoil lug bar on the underside of the mount, with a quick release lever to lock the rail onto the picatinny rail. Due to the quick release lever being set at the same tension when attached, the mount retains the same solid mount each time you fit it back on to the picatinny rail. Although the method of attachment is highly accurate, due to the nature of the picatinny system, it may not always be possible to achieve 100% repeatable zero depending on the mounting procedure, but the accuracy will certainly be within 1 MOA. This is common throughout the whole Contessa Quick Release series.

This QD system allows you to interchange multiple scopes on a single rifle, and even change a single scope to different rifles in seconds using the Contessa system. To see the other available Contessa mounting parts - Click Here


Simple to install at home with the supplied fitting tools. For additional instructions, view the Contessa Adjustment Screw Instructions for Quick Release Mounts Here.

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.



You might also like...

VFG Barrel Cleaning Felts for 6mm (Box of 50)
VFG Barrel Cleaning Felts for 6mm (Box of 50)
£7.48
20% VAT incl.
View
Quick Find
or Search Keywords in
Advanced Search
Shopping Cart
2 x VFG Barrel Cleaning Felts for .45 (Box of 30)3 x EX Demo - Gerber Metolius Pocket Folder4 x Parker Hale Thread to 8-32 Thread Converter2 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)2 x VFG Brass Adaptor for VFG Rod 4-4.5mm (Spare)1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights2 x VFG Intensive Barrel Cleaning Felts for 6.5mm (Box of 50)3 x VFG Intensive Barrel Cleaning Felts for .45 (Box of 30)3 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)2 x Ziegler Quick Release Mount for Blaser - Zeiss Rail4 x VFG Pull Through Match Pocket Set, for 4-4.5mm1 x Black Barrel Case (83cm Internal)1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x ERATAC Bubble Level [T0940-0002]1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Krieghoff Pro Choke Box2 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 100)1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)1 x VFG Barrel Cleaning Felts for 7mm (Box of 50)2 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm2 x VFG 3 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x Krieghoff Brass Mid Sight Bead1 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor4 x ERATAC 34mm Ring with UNI-Interface [03680-5734]2 x VFG Barrel Cleaning Felts for 10.3mm (Box of 30)1 x VFG Adaptor from M5 to 1/8" Aluminium1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x VFG Intensive Barrel Cleaning Felts for 9.3mm (Box of 40)2 x VFG Pull Through Pocket Set for .22 Upwards3 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Krieghoff Brass Front Sight Bead2 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x Krieghoff Trigger Screw1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm2 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x VFG Intensive Barrel Cleaning Felts for 10.3mm (Box of 30)2 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)2 x VFG Adaptor for Parker Hale English Rods (over 7mm)1 x Krieghoff Spares Kit1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings2 x VFG Magnetic Felt Clamps for Vices - 100mm1 x VFG 3 Piece Aluminium Cleaning Rod for 7mm and Over, + Adaptor1 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)2 x Schmierfix Grease by Liqui Moly3 x Anschütz Biathlon Harness1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail2 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]2 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)2 x WalkStool Comfort 65 (65cm/26in)2 x VFG Barrel Cleaning Felts for 8.5mm (Box of 50)1 x WalkStool Set of Spare Red Spring1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)3 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount2 x AimZonic Plus Camo Sound Moderator1 x VFG Intensive Barrel Cleaning Felts for .44 (Box of 30)1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Schultz & Larsen Take Down Rifle Case1 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 25)1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Teague Precision Choke Key2 x HJB 6-24x50 Rifle Scope (Mil-Dot)1 x VFG 1 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x CR2032 Camelion Lithium Battery2 x Gerber Paraframe II Fine Edge Knife1 x Gerber Gator Combo Replacement Saw1 x VFG Complete Set for .1771 x Recknagel Weaver Bases - Winc. 70 Mag. >1964 [.-3025]1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail3 x Gerber GDC Zip Blade1 x Bauer HD 8x42 Binoculars1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 50)1 x AimZonic Compact Camo Sound Moderator1 x Contessa Satin Chromed Steel Picatinny QD Rings - 30mm (8mm BH)1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x Recknagel QD Sling Swivel Socket - Screw-on [23225-0000]1 x Clearance Krieghoff Classic Rifle Americase (With Cover)1 x Bauer - One Piece Railmount 25.4mm (11mm High)1 x ERATAC UNI-Interface Picatinny Rail, 56mm [T0905-0008]2 x VFG Quick Clean Felts for .22 (Box of 80)1 x Contessa Picatinny Rail - CZ 452 / 455 (0 MOA)1 x Contessa Picatinny Rail - Sako S20 (0 MOA) - Extended1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor1 x EX Demo - Gerber Steady Tool (Phone Tripod)1 x Ebony & Brass 20 Bore Snap Caps1 x ERATAC Offset Picatinny to UNI-Interface Adaptor [T0530-0000]1 x Recknagel Picatinny Rail Mauser M12, Steel [..002L]1 x VFG Barrel Cleaning Felts for 8mm (Box of 50)1 x Recknagel Spare Ring Cap Screw M3.5 x 7.4mm [..0880]1 x Krieghoff "K" Denim Cap - Navy1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Bauer Outdoor 8x21 Binoculars1 x Recknagel Steel Stock Trap Door1 x ERATAC UNI-Interface Docter Sight Adaptor [T0920-0005]1 x Winchester 3" Folding Knife1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Gerber Descent - Folding Knife1 x AA x 4 Camelion Plus Alkaline Batteries1 x Bauer HD Series 8x25 Binoculars1 x Contessa Picatinny Rail - Sako S20 (0 MOA)1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]2 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x AAA x 4 Camelion Plus Alkaline Batteries1 x ERATAC 30mm Ring with UNI-Interface [03680-5730]1 x Recknagel Weaver Bases - Winc. 70 Mag. <1964 [.-3095]1 x VFG 1 Piece Steel Short Cleaning Rod with 4-4.5mm (.177) Adaptor1 x ERATAC Offset UNI-Interface Picatinny Rail [T0913-0000]1 x VFG Intensive Barrel Cleaning Felts for 8mm (Box of 50)1 x Starkie Blue (A.K.A Smurf Poo)1 x Contessa Blued Steel Picatinny Rings - 35mm (8mm BH)1 x VFG Barrel Cleaning Felts for .44 (Box of 30)1 x Contessa Blued Steel Tactical Picatinny Rings - 30mm (10mm BH)1 x VFG Barrel Cleaning Felts for 9.3mm (Box of 500)1 x Bear Grylls Basic Survival Kit by Gerber1 x Contessa Blued Steel Picatinny Rings - 1" (8mm BH)1 x Bear Grylls Scout Essentials Kit1 x Contessa Picatinny Rail - Baikal (0 MOA)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Recknagel Spare Tri-Nut Wrench 00088-00861 x Recknagel QD Sling Swivel Socket - Rotating, Flat [..-1010]1 x Gerber Dime Multi-Tool (Lime)1 x Contessa 25.4mm Rings for Simple Black - 7.5mm (High)1 x Contessa QD Mount for HIK-Micro Panther (Picatinny)1 x Recknagel 11mm Dovetail to Picatinny Rail Adaptor [..1011]
£14,430.06
Manufacturers
Useful Information
Picatinny Rail Finder
Bestsellers
Contessa One Piece QD Picatinny Mount with Rings Contessa Quick Release Mount (Picatinny) for ATN X-Sight II Contessa QD Mount for ATN 4K Night Vision (Picatinny)