K-80 Stock Bolt & Weight Balance System

£130.00
20% VAT incl.

Available Options

  • Model:K80STOCKWEIG
K-80 Stock Weight System - Bolt & Weight/s

The stock screw system is installed in the stock bolt access hole under the recoil pad. Installation is simple and involves only removing the original stock bolt and replacing it with the new longer stock bolt.
Please Note: Some stocks may have been shortened along with the stock bolt. To ensure you don't fit the new bolt and risk damaging your gun, please check the length of your existing bolt. You should not be exceeding 8 turns of the stock bolt when fitting. More than 8, feel free to contact us regarding shortening the bolt length.

The length of the longer stock bolt is 292mm.
Length of stock bolt from thread to mid piece is 168mm. This replacement bolt is designed to fit in place of existing stock bolts of 160mm in length.
The washers provide a slight amount of spring tension when tightening up the stock bolt. Please note the washer arrangement in the photo and the Stock Weight Instruction Sheet.

The balance screw carries an adjustable weight that can be positioned anywhere on the top section of the balance screw. The longer stock bolt itself weights an additional 40g in weight to the standard bolt and each weight adds another 30g. A possible 5 weights can be added to the longer stock bolt, totalling 150g. This added to the additional 40g of the stock bolt means you can add up to 190g to the rear end of the gun.

Also available for the K-80 Balance System are the K-80 Barrel Weights, combining both systems provides maximum flexibility in handling configuration.

There are different Options for purchasing:
- Stock Weight Screw with ONE Stock Weight
- Stock Weight Screw with TWO Stock Weights
- Additional Individual Weights are available.

We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

2 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)2 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x Krieghoff 2015 Badge (Collectors Badge)1 x Krieghoff Comb Wrench (T-Handle)1 x Krieghoff 2009 Badge (Collectors Badge)3 x Krieghoff Factory Hanger Pin1 x Krieghoff 2018 DTL Badge (Collectors Badge)2 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Krieghoff 12b Choke Wrench1 x ERATAC Bubble Level [T0940-0002]1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x MSA Sordin - Hygiene Kit - Foam Seals1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x Krieghoff Ejector Ball and Spring1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Anschütz Biathlon Harness1 x Schultz & Larsen Professional Bipod by Spartan2 x Krieghoff Brass Front Sight Bead1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Krieghoff C-Clips (E-Clips)1 x Krieghoff Front Sight Bead (Small)1 x Krieghoff Front Sight Bead (Standard)1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Schmierfix Grease by Liqui Moly1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)2 x Krieghoff Spares Kit2 x Krieghoff HIVIZ Pro Sights1 x Krieghoff Brass Mid Sight Bead1 x Krieghoff Sight Bead Blanking Screw1 x Parker Hale Thread to 8-32 Thread Converter1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Krieghoff Trigger Screw1 x K-80 Barrel Weight Balance System1 x K-80 Stock Weight for Balance System1 x Krieghoff Steel Middle Hanger (For Parcours)1 x Krieghoff Pro Choke Box1 x WalkStool Comfort 65 (65cm/26in)1 x Walkstool Steady1 x WalkStool Set of Spare Red Spring1 x WalkStool Spare Leg Joints1 x K-80 Forward Position Trigger - Titanium
Manufacturers
Useful Information