Krieghoff Barrel / Stock Stickers

£2.50
20% VAT incl.

Available Options

  • Model:BARREL-STICKER
Krieghoff Barrel / Stock Stickers
Available in Gold, Silver or White.

These high quality vinyl sticker with the "Krieghoff" text logo are designed to be transferred to your Krieghoff Barrels or Stock.

The stickers come as a set of two. So you can attach one either side of your barrels, or attach one to your barrel and one to your stock.

Size: 149mm x 17.5mm
Choose your colour from the drop-down menu above.

How to Apply your Stickers

Step 1 - Prepare It
Lay your sticker on a clean and flat surface with the backing tape (white side) face down and rub over the application tape (clear side) with your squeegee or credit card to ensure the application tape has a good bond to the vinyl letters.

Step 2 - Peel It
Check the positioning of where your sticker will go, so you're ready for the next stage.
Next, peel the application tape (clear side) away from the backing paper (white side). Your sticker letters will now be held by the application tape.
Carefully place the the application tape on to your barrels. Check the alignment as you place it down.

Step 3 - Rub It
While your sticker in laying on your barrels in position, start by rubbing over the application tape and letters gently, and then increase the pressure and firmly rub with your squeegee or credit card. Make sure you cover each letter thoroughly.

Step 4 - Remove It
Carefully peel away the application tape at an angle and corner to corner. The letters should all be transferred onto your barrel. If they are still attached to the application tape, lay the application tape back down and rub over the letter again with the squeegee or credit card. Now, try again until the whole sticker has been transferred.
Your new Krieghoff Barrel / Stock Sticker should now be in place and ready to show off.
If your letters are not coming away from the application tape as you're peeling the application tape off, lay the application tape back over the letter and use the squeegee to rub over the letter again.

Sticker Removal
If you decide to remove the stickers for any reason. Use some light heat such as a hair dryer to aid the removal. The adhesive is permanent but will not damage or mark your barrels. Do not use any abrasive materials or solvents to remove the stickers as this may cause damage to the finish of your barrels.

Postage
We send the Krieghoff Barrel & Stock Stickers with a piece of card to prevent the stickers from being damaged in transit.



You might also like...

1 x Schmierfix Grease by Liqui Moly1 x Krieghoff "K" Logo Cap Navy & White1 x K-80 Forward Position Trigger - Black Titanium1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Krieghoff Extended Pillars for Adjustable Comb1 x K-80 Forward Position Trigger - Gold Plated1 x Krieghoff Choke Multi Wrench1 x ERATAC Bubble Level [T0940-0002]1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint2 x Parker Hale Thread to 8-32 Thread Converter1 x Krieghoff Spares Kit1 x K-80 Standard Trigger - Gold Plated1 x Krieghoff Trigger & Selector Locking Wrench1 x Bauer HD Series 8x25 Binoculars2 x Krieghoff Factory Hanger Pin1 x K-80 Forward Position Trigger - Steel1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x K-80 Forward Position Trigger - Titanium1 x Krieghoff Front Sight Bead (Standard)1 x Krieghoff Front Sight Bead (Small)1 x Krieghoff Trap Special / Pro Rib Wheel Locking Wrench1 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)1 x K-80 Barrel Weight Balance System2 x Krieghoff Brass Front Sight Bead1 x AG3 / 392A Alkaline Batteries (10 Pack)1 x Krieghoff Sight Bead Blanking Screw1 x K-80 Standard Trigger - Steel1 x Krieghoff C-Clips (E-Clips)2 x Krieghoff Comb Wrench (T-Handle)1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Krieghoff Stock Removal Wrench1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Krieghoff "K" Collectors Badge1 x Black Leather Shell/Cartridge Pouch1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Krieghoff Pro Choke Box
Manufacturers
Useful Information