VFG Barrel Cleaning Felts for .44 (Box of 250)

£19.95
20% VAT incl.


  • Model:331975
VFG Barrel Cleaning Felts for .44 Calibre
Code: 331975


These small felt screw-on pellets, which are calibre specific are used with the VFG Cleaning Rod to clean your barrel. The felts screw onto the cleaning rod tip and then passed down the barrel to give a smooth and effective clean. Ideal for .44 MAG calibres.

The .44 felts are recommended for the following calibres: .44 Mag
See which Felts suit your Calibre >>>

Supplied as small box containing: 250 felt screw-on pellets

Instructions for Use:
1. Take Adapter and screw this onto VFG Cleaning rod
2. Screw a VFG felt cleaner onto the coarse thread of the adapter.
3. Place a second VFG felt cleaner onto the metric thread (used together a screw for the cleaning of shotguns)
4. Push the adapter with the two felts carefully through the barrel from the breech end and out of the muzzle. The special felts compress into the rifling and follow it exactly. The forward pellet removes the fouling out of the muzzle and by pulling back the rod, the dirty pellet drops off the metric thread, leaving the screwed pellet to polish the barrel by pushing the rod backwards and forwards.
5. If the barrel is to be oiled, screw VFG Rifle Cleaner onto the adapter, soak this thoroughly with weapon oil (Ballistol or Ustanol) and repeatedly move it back and forth in the barrel.
6. To remove the oil repeat steps 1 - 4.
7. In order to remove rubbed off metal, please use Super Intensive Cleaners.

Make sure that the barrel of your weapon is free after each cleaning operation.

See the VFG Barrel Cleaning Catalogue >>>

Also Available:
Small Box Quantities (Standard) Small Box Quantities (Intensive) Large Pack Quantities
4 - 4.5mm Standard Felts (100) 4 - 4.5mm Intensive Felts (100) 4 - 4.5mm Standard Felts (500)
.22 Standard Felts (80) .22 Intensive Felts (80) .22 Standard Felts (500)
6mm Standard Felts (50) 6mm Intensive Felts (50) 6mm Standard Felts (500)
6.5mm Standard Felts (50) 6.5mm Intensive Felts (50) 6.5mm Standard Felts (500)
7mm Standard Felts (50) 7mm Intensive Felts (50) 7mm Standard Felts (500)
7.5mm Standard Felts (50) 7.5mm Intensive Felts (50) 7.5mm Standard Felts (500)
8mm Standard Felts (50) 8mm Intensive Felts (50) 8mm Standard Felts (500)
9mm Standard Felts (40) 9mm Intensive Felts (40) 9mm Standard Felts (500)
9.3mm Standard Felts (40) 9.3mm Intensive Felts (40) 9.3mm Standard Felts (500)
.375 Standard Felts (40) .375 Intensive Felts (40) .375 Standard Felts (500)
10.3mm Standard Felts (30) 10.3mm Intensive Felts (30) N/A
.44 Standard Felts (30) .44 Intensive Felts (30) .44 Standard Felts (250)
.45 Standard Felts (30) .45 Intensive Felts (30) N/A


Features & Cleaning Instructions Video

1 x Contessa Quick Release Mount (Picatinny) for ATN X-Sight II1 x Contessa Tactical One Piece Fixed Picatinny Ring Mount - 30mm1 x Contessa QD Low Mount for Yukon Photon Night Vision (Picatinny)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 XS (0 MOA)1 x Contessa Shiny Chromed Picatinny Rail - Howa Long (0 MOA)1 x Contessa Tactical One Piece QD Picatinny Ring Mount 30mm, 20 MOA3 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)2 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Contessa One Piece QD Extended Picatinny Rail Mount1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Long (20 MOA)1 x Contessa Shiny Chromed Picatinny Rail - Howa Long (10 MOA)1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Contessa Lightweight Alloy Picatinny Mount for Docter Red Dot Sight1 x Contessa One Piece QD Picatinny Mount for Burris Scopes1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Short (0 MOA) Adjustable1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Long (10 MOA)1 x Contessa QD Mount for ATN 4K Night Vision (Picatinny)1 x Contessa Tactical One Piece QD Picatinny Ring Mount 40mm, 0 MOA1 x Contessa One Piece QD Picatinny Mount for Swarovski Rail1 x Contessa Shiny Chromed Picatinny Rail - Howa Long (20 MOA)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 XS (10 MOA)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Med (20 MOA)1 x Contessa One Piece QD Picatinny Mount for Zeiss Rail1 x Contessa Shiny Chromed Picatinny Rail - Howa Short (10 MOA)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 XS (20 MOA)1 x Contessa Tactical One Piece QD Picatinny Ring Mount - 40mm1 x Contessa QD Low Mount for Pulsar Night Vision (Picatinny)1 x Contessa Satin Chromed Picatinny Rail - Howa Short (0 MOA)1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Short (20 MOA) Adjustable1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (20 MOA)1 x Contessa Tactical One Piece QD Picatinny Ring Mount 30mm, 0 MOA1 x Contessa Satin Chromed Picatinny Rail - Howa Short (20 MOA)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Long (0 MOA) Adjustable1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (0 MOA)1 x Contessa QD Ultra Low Blaser Mount for Pulsar Night Vision1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Contessa QD Mount for Blaser R8/R93 for Zeiss/Leica/Docter Rail1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Contessa QD Both Extended Picatinny Rails Mount for Blaser1 x Contessa QD Extra Extended Rear Picatinny Rail - Blaser1 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser1 x Contessa QD Extra Extended Front & Rear Picatinny Rail - Blaser1 x Contessa QD Mount for Blaser for ATN X-Sight II1 x Contessa Spare Rail Screws 6-48 x 8.5mm Long1 x Contessa Spare Screw M10 for Anschutz/CZ Rails1 x Contessa Spare Screw for Sako 75/85 Rails2 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x Contessa Spare Ring-to-Base Screws1 x Contessa Spare Blaser Mounting Clamp Parts1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)3 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount2 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x Contessa Picatinny Rail - CZ 527 (0 MOA)1 x Krieghoff Front Sight Bead (Small)1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Recknagel Weaver Bases - Winc. 70 Mag. >1964 [.-3025]1 x Briley 20b Speed Wrench - For Krieghoff1 x Contessa Picatinny Rail - Sako S20 (0 MOA)1 x Recknagel Weaver Bases - Winc. 70 Mag. <1964 [.-3095]1 x Schmierfix Grease by Liqui Moly1 x Ebony & Brass 20 Bore Snap Caps1 x Black Leather Shell/Cartridge Pouch1 x Starkie Blue (A.K.A Smurf Poo)1 x Black Barrel Case (83cm Internal)1 x Custom Rifles of Great Britain by Bruce Potts1 x Contessa 6mm Rib Blank Euro Rail Base for Quick Release Mount1 x Contessa Rizzini Euro Rail Base for Quick Release Mount1 x Contessa Remington 700 Long Euro Rail for QR Mounts1 x Contessa Merkel Helix Euro Rail for Quick Release Mount1 x Contessa Sauer 202 Magnum Euro Rail Base for QR Mounts1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Contessa Sako 75/85 Short Euro Rail for Quick Release Mount1 x Contessa Anschutz 54 Euro Rail Base for Quick Release Mount1 x Contessa Bettinsoli Euro Rail Base for Quick Release Mount1 x Contessa Browning BAR Euro Rail for Quick Release Mount1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Contessa CZ 550 Euro Rail for Quick Release Mount1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Contessa Browning X-Bolt L Euro Rail Base for QR Mount1 x Contessa Browning European Euro Rail for Quick Release Mount1 x Contessa Browning X-Bolt S Euro Rail Base for QR Mount1 x Contessa Sako 75/85 Medium Euro Rail for Quick Release Mount1 x Contessa Sako 75/85 Long Euro Rail for Quick Release Mount1 x Contessa CZ 527 Euro Rail for Quick Release Mount1 x Contessa Remington 700 Short Euro Rail Base for QR Mount1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Contessa 30mm Steel 11mm Dovetail Rings, 16mm BH2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Contessa Blued Steel Picatinny Rings - 35mm (8mm BH)1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Contessa Blued Steel Picatinny Rings - 36mm (8mm BH)1 x Contessa Lightweight Alu Picatinny Rings - 40mm (8mm BH)1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Teague Precision Choke Key1 x Contessa Blued Steel Picatinny Rings - 1" (8mm BH)1 x Contessa Lightweight Alu Picatinny Rings - 1 Inch (8mm BH)1 x Contessa Satin Chromed Steel Picatinny QD Rings - 30mm (8mm BH)1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Contessa Blued Steel Tactical Picatinny Rings - 30mm (10mm BH)1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Contessa Blued Steel Picatinny Rings - 40mm (14.5mm BH)1 x Contessa Satin Chromed Steel Picatinny Rings - 1" (8mm BH)1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Contessa Shiny Chromed Steel Picatinny Rings - 1" (8mm BH)1 x Contessa Blued Ergal Picatinny Rings - 36mm (8mm BH)1 x Contessa Satin Chromed Steel Picatinny Rings - 30mm (8mm BH)1 x Contessa Lightweight Alu Picatinny Rings - 36mm (8mm BH)1 x Contessa 35mm Rings for Simple Black - 7.5mm (High)1 x Contessa 30mm Rings for Simple Black - 2.5mm (Low)1 x Contessa 30mm Rings for Simple Black - 10.0mm (X-High)1 x Contessa Quick Release Picatinny Extended Rail (Night Vision)1 x Contessa 25.4mm Rings for Simple Black - 7.5mm (High)1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Krieghoff Brass Front Sight Bead1 x Contessa Quick Release Mount for Burris/Nikon1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Krieghoff HIVIZ Pro Sights1 x Contessa 30mm Rings for Simple Black - 7.5mm (High)
Manufacturers
Useful Information