Krieghoff Barrel / Stock Stickers

£2.50
20% VAT incl.

Available Options

  • Model:BARREL-STICKER
Krieghoff Barrel / Stock Stickers
Available in Gold, Silver or White.

These high quality vinyl sticker with the "Krieghoff" text logo are designed to be transferred to your Krieghoff Barrels or Stock.

The stickers come as a set of two. So you can attach one either side of your barrels, or attach one to your barrel and one to your stock.

Size: 149mm x 17.5mm
Choose your colour from the drop-down menu above.

How to Apply your Stickers

Step 1 - Prepare It
Lay your sticker on a clean and flat surface with the backing tape (white side) face down and rub over the application tape (clear side) with your squeegee or credit card to ensure the application tape has a good bond to the vinyl letters.

Step 2 - Peel It
Check the positioning of where your sticker will go, so you're ready for the next stage.
Next, peel the application tape (clear side) away from the backing paper (white side). Your sticker letters will now be held by the application tape.
Carefully place the the application tape on to your barrels. Check the alignment as you place it down.

Step 3 - Rub It
While your sticker in laying on your barrels in position, start by rubbing over the application tape and letters gently, and then increase the pressure and firmly rub with your squeegee or credit card. Make sure you cover each letter thoroughly.

Step 4 - Remove It
Carefully peel away the application tape at an angle and corner to corner. The letters should all be transferred onto your barrel. If they are still attached to the application tape, lay the application tape back down and rub over the letter again with the squeegee or credit card. Now, try again until the whole sticker has been transferred.
Your new Krieghoff Barrel / Stock Sticker should now be in place and ready to show off.
If your letters are not coming away from the application tape as you're peeling the application tape off, lay the application tape back over the letter and use the squeegee to rub over the letter again.

Sticker Removal
If you decide to remove the stickers for any reason. Use some light heat such as a hair dryer to aid the removal. The adhesive is permanent but will not damage or mark your barrels. Do not use any abrasive materials or solvents to remove the stickers as this may cause damage to the finish of your barrels.

Postage
We send the Krieghoff Barrel & Stock Stickers with a piece of card to prevent the stickers from being damaged in transit.



You might also like...

1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x VFG Barrel Cleaning Felts for 9mm (Box of 500)1 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 500)2 x Winchester 3" Folding Knife1 x VFG Pull Through Pocket Set for .22 Upwards1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)2 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)2 x Anschütz Biathlon Harness2 x Schultz & Larsen Professional Bipod by Spartan1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights2 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Schmierfix Grease by Liqui Moly2 x Krieghoff Spares Kit1 x Krieghoff Pro Choke Box1 x Krieghoff K80 Speed Wrench for Factory Chokes2 x Krieghoff Trigger Screw1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Krieghoff "K" Denim Cap - Grey1 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Schultz & Larsen T-Handle Wrench (4mm Hex)1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Krieghoff Woven Fabric Patch1 x Krieghoff HIVIZ Pro Sights1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Recknagel SOB3D Silencer (ERA LOC)1 x Recknagel SOB3D Silencer (Standard Thread)1 x VFG Pull Through Match Pocket Set, for 4-4.5mm1 x Starkie Blue (A.K.A Smurf Poo)1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)2 x Krieghoff Brass Front Sight Bead3 x WalkStool Spare Leg Joints1 x ERATAC Bubble Level [T0940-0002]1 x Krieghoff Brass Mid Sight Bead1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Krieghoff Extended Pillars for Adjustable Comb2 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)2 x Briley T Wrench for K-80 Parcours Briley Chokes1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x MSA Sordin - Hygiene Kit - Foam Seals2 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus2 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Bauer Outdoor 10x25 Binoculars3 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)2 x Bauer Outdoor 8x21 Binoculars1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x VFG Adaptor for US Rods 7-32 UNC (.22 and Over)1 x Recknagel Weaver Bases - Winc. 70 Mag. <1964 [.-3095]1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (20 MOA)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Med (20 MOA)1 x Contessa One Piece QD Picatinny Mount for Swarovski Rail1 x Contessa Picatinny Rail - Sako S20 (0 MOA)1 x Contessa Tactical One Piece QD Picatinny Ring Mount 30mm, 0 MOA1 x VFG Adaptor for VFG Rods Brass1 x Contessa Satin Chromed Picatinny Rail - Howa Short (20 MOA)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Long (20 MOA)1 x Contessa Tactical One Piece QD Picatinny Ring Mount 40mm, 0 MOA2 x Contessa Tactical One Piece Fixed Picatinny Ring Mount - 30mm2 x VFG Barrel Cleaning Felts for .45 (Box of 30)1 x Contessa Quick Release Mount for Zeiss Rail1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x VFG Brass Adaptor for VFG Rod 4-4.5mm (Spare)1 x Contessa QD Mount for ATN 4K Night Vision (Picatinny)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 XS (0 MOA)1 x Contessa 25.4mm Rings for Simple Black - 7.5mm (High)1 x Contessa Ultra Low Quick Release Mount for Zeiss CP/Doctor1 x Contessa Satin Chromed Picatinny Rail - Sako 85 XS (10 MOA)1 x Contessa 30mm Rings for Simple Black - 5.0mm (Med)1 x Contessa Shiny Chromed Picatinny Rail - Howa Short (10 MOA)2 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x Contessa One Piece QD Extended Picatinny Rail Mount1 x VFG Magnetic Felt Clamps for Vices - 80mm1 x Contessa Tactical One Piece QD Picatinny Ring Mount 30mm, 20 MOA1 x Contessa QD Low Mount for Pulsar Night Vision (Picatinny)1 x Contessa 40mm Rings for Simple Black - 6.0mm (Medium)1 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x Contessa Lightweight Alloy Picatinny Mount for Docter Red Dot Sight1 x Contessa Quick Release Mount for Swarovski Rail1 x Contessa Browning X-Bolt L Euro Rail Base for QR Mount1 x Contessa Sako 75/85 Long Euro Rail for Quick Release Mount1 x VFG Barrel Cleaning Felts for 10.3mm (Box of 30)1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Contessa Rizzini Euro Rail Base for Quick Release Mount1 x Used Sako P94S, Wooden Stock (.22 LR)1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Ex-Demo K-80 Steel 12b Hanger #51 x VFG 1 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x VFG Barrel Cleaning Felts for 9.3mm (Box of 500)1 x VFG 1 Piece Steel Short Cleaning Rod with 4-4.5mm (.177) Adaptor2 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor1 x Contessa Sako 75/85 Short Euro Rail for Quick Release Mount1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount1 x LED Lenser Intelligent Filter Set with Holster1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)1 x Gerber New Myth Series Fixed Blade Pro (Fine Edge)1 x Silva Dine Duo Kit - Purple/White1 x Bear Grylls Basic Survival Kit by Gerber1 x Gerber Basic Fixed Blade Serrated1 x Bear Grylls Pocket Tool1 x Silva Commute Bike Light - Pink1 x Gerber Gator Combo Replacement Saw1 x Gerber Paraframe II Fine Edge Knife1 x Gerber GDC Zip Blade1 x Bauer HD 8x42 Binoculars1 x Gerber Descent - Folding Knife1 x Silva Map Measurer (Mechanical)1 x AAA x 4 Camelion Plus Alkaline Batteries1 x Recknagel Weaver Bases - Browning T-Bolt [57080-301Q]1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Recknagel Blank 12mm Eurorail - 150mm1 x Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser1 x ERATAC UNI-Interface Picatinny Rail, 56mm [T0905-0008]1 x Krieghoff K80 Speed Wrench for KTW Chokes2 x Krieghoff Trap Special / Pro Rib Wheel Locking Wrench2 x Gerber Myth Series Fixed Saw1 x Ebony & Brass 20 Bore Snap Caps1 x K-80 Forward Position Trigger - Black Titanium1 x Krieghoff Ejector Ball and Spring1 x Krieghoff Stock Removal Wrench1 x Recknagel Weaver Bases - Browning BBR [57080-3004]1 x Recknagel SECURA Sling Swivel - 25.4mm Wide - 6mm [22009-3000]1 x Recknagel Weaver/Picatinny Mounts for Zeiss Rail 45º (Tri-Nut)1 x Recknagel Weaver Bases - Browning X-Bolt [57080-301P]1 x Recknagel 16mm Dovetail Ring Mounts 30mm2 x Black Barrel Case (83cm Internal)1 x ERATAC ACI Bubble Level [T0940-0000]1 x ERATAC 30mm One Piece Extended Ring Mount (Lever)2 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x ERATAC Ultra Lightweight One Piece Ring Mount1 x Krieghoff Trigger & Selector Locking Wrench1 x ERATAC 30mm One Piece Extended Ring Mount (Nut)1 x K-80 Standard Trigger - Steel1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x Krieghoff Sight Bead Blanking Screw1 x Jones Gun Nut Kit1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 50)1 x VFG Barrel Cleaning Felts for .44 (Box of 30)1 x HJB 6-24x50 Rifle Scope (Mil-Dot)1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Contessa 30mm Rings for Simple Black - 10.0mm (X-High)1 x Contessa 25.4mm Rings for Simple Black - 5.0mm (Medium)1 x Schultz & Larsen Picatinny Rings 30mm, 4mm BH, Alu1 x ERATAC Picatinny to Harris Bipod Adaptor, Stud (Nut)1 x ERATAC ZFIX Telescopic Sight Alignment Aid [T0810-0000]1 x ERATAC Picatinny to Harris Bipod Adaptor, Stud (Lever)1 x ERATAC Picatinny to Harris Bipod Adaptor, Sliding Block (Lever)1 x ERATAC Special Use One Piece Ring Mount for S&B PMII1 x ERATAC Ultra Lightweight Extended One Piece Ring Mount1 x Recknagel Detachable Magnum Sling Swivel 25.4mm Loop - 8mm Stud1 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)1 x ERATAC Picatinny to Harris Bipod Adaptor, Sliding Block (Nut)1 x ERATAC 34mm One Piece Extended Ring Mount (Lever)1 x ERATAC Backup Front Sight for Picatinny, 1.8mm [T0542-0355]1 x ERATAC Two-Piece Picatinny Rings (Nut)1 x ERATAC 34mm One Piece Extended Ring Mount (Nut)1 x ERATAC Picatinny Extended Riser Mount (Nut)1 x ERATAC Backup Rear Sight for Picatinny [T0544-0355]1 x Walkstool Steady1 x ERATAC Offset UNI-Interface for Docter Sight [T0930-0000]
Manufacturers
Useful Information