VFG Barrel Cleaning Felts for 9mm (Box of 500)

£37.40
20% VAT incl.


  • Model:331962
VFG Barrel Cleaning Felts for 9mm
Code: 331962


These small felt screw-on pellets, which are calibre specific are used with the VFG Cleaning Rod to clean your barrel. The felts screw onto the cleaning rod tip and then passed down the barrel to give a smooth and effective clean.

The 9mm felts are recommended for the following calibres: 9mm, .350 Rem. Mag., .358 Norma Mag., .38 SuperAuto, .357 SIG, .38-45 ACP, .38 Long Colt, .357 Mag., .38 WC.
See which Felts suit your Calibre >>>

Supplied as small box containing: 500 felt screw-on pellets
(Also available: 9mm felts - box of 40, for extensive usage and better value)

Instructions for Use:
1. Take Adapter and screw this onto VFG Cleaning rod No. 66889 (900 mm Long).
2. Screw a VFG felt cleaner onto the coarse thread of the adapter.
3. Place a second VFG felt cleaner onto the metric thread (used together a screw for the cleaning of shotguns)
4. Push the adapter with the two felts carefully through the barrel from the breech end and out of the muzzle. The special felts compress into the rifling and follow it exactly. The forward pellet removes the fouling out of the muzzle and by pulling back the rod, the dirty pellet drops off the metric thread, leaving the screwed pellet to polish the barrel by pushing the rod backwards and forwards.
5. If the barrel is to be oiled, screw VFG Rifle Cleaner onto the adapter, soak this thoroughly with weapon oil (Ballistol or Ustanol) and repeatedly move it back and forth in the barrel.
6. To remove the oil repeat steps 1 - 4.
7. In order to remove rubbed off metal, please use Super Intensive Cleaners.

Make sure that the barrel of your weapon is free after each cleaning operation.

See the VFG Barrel Cleaning Catalogue >>>

Also Available:
Small Box Quantities (Standard) Small Box Quantities (Intensive) Large Pack Quantities
4 - 4.5mm Standard Felts (100) 4 - 4.5mm Intensive Felts (100) 4 - 4.5mm Standard Felts (500)
.22 Standard Felts (80) .22 Intensive Felts (80) .22 Standard Felts (500)
6mm Standard Felts (50) 6mm Intensive Felts (50) 6mm Standard Felts (500)
6.5mm Standard Felts (50) 6.5mm Intensive Felts (50) 6.5mm Standard Felts (500)
7mm Standard Felts (50) 7mm Intensive Felts (50) 7mm Standard Felts (500)
7.5mm Standard Felts (50) 7.5mm Intensive Felts (50) 7.5mm Standard Felts (500)
8mm Standard Felts (50) 8mm Intensive Felts (50) 8mm Standard Felts (500)
9mm Standard Felts (40) 9mm Intensive Felts (40) 9mm Standard Felts (500)
9.3mm Standard Felts (40) 9.3mm Intensive Felts (40) 9.3mm Standard Felts (500)
.375 Standard Felts (40) .375 Intensive Felts (40) .375 Standard Felts (500)
10.3mm Standard Felts (30) 10.3mm Intensive Felts (30) N/A
.44 Standard Felts (30) .44 Intensive Felts (30) .44 Standard Felts (250)
.45 Standard Felts (30) .45 Intensive Felts (30) N/A


Features & Cleaning Instructions Video



You might also like...

VFG Adaptor for VFG Rods (Spare)
VFG Adaptor for VFG Rods (Spare)
£6.24
20% VAT incl.
Krieghoff "K Logo" T-Shirt - Blue (S / M)
Krieghoff "K Logo" T-Shirt - Blue (S / M)
£14.00
20% VAT incl.
now £4.00
20% VAT incl.
2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)2 x Krieghoff HIVIZ Pro Sights2 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights3 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint2 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]3 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Contessa CZ 527 Euro Rail for Quick Release Mount1 x Recknagel Blank 12mm Eurorail - 150mm1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount1 x Krieghoff Spares Kit1 x Krieghoff Pro Choke Box1 x Krieghoff Trigger Screw1 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor1 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 25)1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x VFG Adaptor fits Tipton Cleaning Rods (8-32 Thread)1 x Anschütz Biathlon Harness1 x Schultz & Larsen Professional Bipod by Spartan1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x CR2032 Camelion Lithium Battery1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x Krieghoff Navy Canvas Gun Slip1 x Recknagel Weaver Bases - Browning European [..-3056]1 x Recknagel Weaver Bases - Browning X-Bolt [57080-301P]1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Recknagel Weaver Bases - Beretta 501 S [57080-3026]1 x Recknagel Weaver Bases - Anschutz 1780 [57080-302B]1 x Recknagel Weaver Bases - Browning Eurobolt [..-3078]1 x Recknagel Weaver Bases - Haenel Jager 10 [..-302C]1 x Recknagel Weaver Bases - Benelli ARGO [57080-3076]1 x Recknagel Weaver Bases - Browning BAR/BLR [57080-3003]1 x Recknagel Weaver Bases - H&K SLB 2000 [..-3008]1 x Recknagel Weaver Bases - Chapuis Express [57080-3029]1 x Recknagel Weaver Bases - FFV Carl Gustaf 1900 [.-3005]1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Recknagel Weaver Bases - FFV Carl Gustaf 4000 [.-3042]1 x Recknagel Weaver Bases - Browning A-Bolt III [57080-302T]1 x Recknagel Weaver Bases - FFV Carl Gustaf 2000 [.-3028]1 x Recknagel Weaver Bases - Heym SR 20 [57080-3060]1 x Recknagel Weaver Bases - Browning A-Bolt I/II [57080-3020]1 x Recknagel Weaver Bases - Browning Acera [..-3077]1 x Recknagel Weaver Bases - Browning T-Bolt [57080-301Q]1 x Recknagel Weaver Bases - Browning BBR [57080-3004]1 x Recknagel Weaver Bases - Browning Mauser [..-3057]1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 500)2 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail1 x Contessa QD Mount for Blaser R8/R93 for Zeiss/Leica/Docter Rail1 x Contessa QD Both Extended Picatinny Rails Mount for Blaser1 x Contessa QD Ultra Low Blaser Mount for Pulsar Night Vision1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Contessa QD Extra Extended Rear Picatinny Rail - Blaser1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser2 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser1 x Contessa QD Forward Extended Picatinny Rail Mount for Blaser1 x Contessa QD Extra Extended Front & Rear Picatinny Rail - Blaser1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Contessa Picatinny Rail - Ruger American (0 MOA)1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Contessa Spare Rail Screws 6-48 x 8.5mm Long1 x Recknagel Spare Ring Cap Screw M3.5 x 7.4mm [..0880]1 x Contessa Spare Ring-to-Base Screws1 x Contessa Ultra Low Quick Release Mount for Zeiss CP/Doctor1 x Recknagel Zeiss Rail 45º Components - 6mm BH1 x Recknagel Spare Nut for Picatinny Mounts [00001-045A]1 x Contessa Spare Screw for Sako 75/85 Rails1 x Recknagel Weaver/Picatinny Mounts for Zeiss Rail 45º (Tri-Nut)1 x Recknagel Weaver/Picatinny Mount for Aimpoint Micro [57020-1200]1 x Contessa Quick Release Mount for Swarovski Rail1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (QD Lever)1 x Contessa Picatinny Rail - Remington 700 Long Extended (0 MOA)1 x Contessa Picatinny Rail - Tikka M690/M695 (0 MOA)1 x Contessa Picatinny Rail - Sauer 90 (0 MOA)1 x Recknagel One Piece Tip-off Mounts for Swarovski [57553-0110]1 x Recknagel Mount for Docter & Zeiss Compact [57070-0000]1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (Tri-Nut)1 x Recknagel Spare Tri-Nut Wrench 00088-00861 x Recknagel Weaver/Picatinny Mounts for Zeiss 45º (QD Lever)1 x Recknagel Zeiss Rail 70º Components - 4mm BH1 x Contessa Quick Release Mount (Picatinny) for ATN X-Sight II1 x Contessa Spare Screw M10 for Anschutz/CZ Rails1 x Contessa Quick Release Mount for Zeiss Rail1 x Recknagel Swarovski Rail Components for Optilock Base - 5mm BH1 x Contessa One Piece QD Picatinny Mount for Zeiss Rail1 x Schultz & Larsen Torx Key for Scope Mounts1 x Recknagel Replacement Polyform Lever [00088-5700]1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm2 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Contessa QD Mount for HIK-Micro Panther (Picatinny)2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Parker Hale Thread to 8-32 Thread Converter1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)2 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Krieghoff Brass Front Sight Bead1 x ERATAC 30mm Ring with UNI-Interface [03680-5730]1 x Contessa Lightweight Alloy Picatinny Mount for Docter Red Dot Sight1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x ERATAC ACI Bubble Level [T0940-0000]1 x ERATAC Offset Picatinny to UNI-Interface Adaptor [T0530-0000]1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x ERATAC ACI Elevation Turret [T0941-0000]1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x ERATAC 56mm Ring with UNI-Interface [03680-5757]1 x ERATAC UNI-Interface Picatinny Rail, 85mm [T0908-0013]1 x ERATAC UNI-Interface Picatinny Rail, 56mm [T0905-0008]
Manufacturers
Useful Information