Schultz & Larsen T-Handle Wrench (Torx 20)

£11.50
20% VAT incl.


  • Model:SL-T20-WRENCH
Schultz & Larsen T-Handle Wrench (Torx 20)

For use with Schultz & Larsen Legacy rifle. The Wrench is use primarily to un-tighten the vital screws to remove and reattach the barrel.

There are two screws on the trigger mechanism plate to loosen. These are undone and removed, then trigger mechanism plate drops out to free the barrelled action. This is to be taken out from the top of the stock, once removed, there are two more screws which hold the barrel into the action. These need to be loosened with the T-Wrench also, but only by 1/2 to 3/4 turn, then out slides the barrel.

When reattaching the barrel. Slide the barrel back into the action ensuring the lug in the action slots fully into the barrel. Insert the bolt and close to guarantee the position is correct. Tighten the screws on the action gradually by alternating between the two until fully tightened. Once the barrel is attached, insert the barrelled action back into the stock, then attach the trigger mechanism plate back in place and tighten up the two screws (smaller of the two at the front). Do this alternatively until fully tightened.

Length: 175mm
Torx 20 Wrench
1 x VFG Barrel Cleaning Felts for 9mm (Box of 500)3 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x VFG Barrel Cleaning Felts for 9mm (Box of 40)3 x Parker Hale Thread to 8-32 Thread Converter1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x VFG Pull Through Pocket Set for .22 Upwards1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x Krieghoff Factory Hanger Pin1 x Krieghoff C-Clips (E-Clips)1 x Krieghoff 2009 Badge (Collectors Badge)1 x Contessa Lightweight Alu Picatinny Rings - 1 Inch (8mm BH)1 x Contessa Picatinny Rail - Bergara B13 (0 MOA)1 x Custom Rifles of Great Britain by Bruce Potts1 x Ebony & Brass 20 Bore Snap Caps1 x Starkie Blue (A.K.A Smurf Poo)1 x Krieghoff 12b Choke Wrench1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Recknagel Weaver Bases - Browning X-Bolt [57080-301P]1 x ERATAC 56mm Ring with UNI-Interface [03680-5757]1 x Recknagel Weaver Bases - H&K SLB 2000 [..-3008]1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Recknagel Weaver Bases - Browning T-Bolt [57080-301Q]1 x Krieghoff Spares Kit1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Bear Grylls Compact Multi-Tool by Gerber1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Krieghoff Comb Wrench (T-Handle)1 x Krieghoff Extended Pillars for Adjustable Comb
Manufacturers
Useful Information