Krieghoff Barrel / Stock Stickers

£2.50
20% VAT incl.

Available Options

  • Model:BARREL-STICKER
Krieghoff Barrel / Stock Stickers
Available in Gold, Silver or White.

These high quality vinyl sticker with the "Krieghoff" text logo are designed to be transferred to your Krieghoff Barrels or Stock.

The stickers come as a set of two. So you can attach one either side of your barrels, or attach one to your barrel and one to your stock.

Size: 149mm x 17.5mm
Choose your colour from the drop-down menu above.

How to Apply your Stickers

Step 1 - Prepare It
Lay your sticker on a clean and flat surface with the backing tape (white side) face down and rub over the application tape (clear side) with your squeegee or credit card to ensure the application tape has a good bond to the vinyl letters.

Step 2 - Peel It
Check the positioning of where your sticker will go, so you're ready for the next stage.
Next, peel the application tape (clear side) away from the backing paper (white side). Your sticker letters will now be held by the application tape.
Carefully place the the application tape on to your barrels. Check the alignment as you place it down.

Step 3 - Rub It
While your sticker in laying on your barrels in position, start by rubbing over the application tape and letters gently, and then increase the pressure and firmly rub with your squeegee or credit card. Make sure you cover each letter thoroughly.

Step 4 - Remove It
Carefully peel away the application tape at an angle and corner to corner. The letters should all be transferred onto your barrel. If they are still attached to the application tape, lay the application tape back down and rub over the letter again with the squeegee or credit card. Now, try again until the whole sticker has been transferred.
Your new Krieghoff Barrel / Stock Sticker should now be in place and ready to show off.
If your letters are not coming away from the application tape as you're peeling the application tape off, lay the application tape back over the letter and use the squeegee to rub over the letter again.

Sticker Removal
If you decide to remove the stickers for any reason. Use some light heat such as a hair dryer to aid the removal. The adhesive is permanent but will not damage or mark your barrels. Do not use any abrasive materials or solvents to remove the stickers as this may cause damage to the finish of your barrels.

Postage
We send the Krieghoff Barrel & Stock Stickers with a piece of card to prevent the stickers from being damaged in transit.



You might also like...

1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x ERATAC Bubble Level [T0940-0002]1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)6 x Briley 12b Speed Wrench - For Briley Spectrum Chokes3 x Krieghoff Trigger & Selector Locking Wrench6 x MSA Sordin - Hygiene Kit - Foam Seals2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount3 x Parker Hale Thread to 8-32 Thread Converter1 x Schultz & Larsen Professional Bipod by Spartan2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)4 x Briley 20b Speed Wrench - For Krieghoff3 x Krieghoff Brass Front Sight Bead1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)6 x Schmierfix Grease by Liqui Moly4 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Black Leather Shell/Cartridge Pouch1 x Custom Rifles of Great Britain by Bruce Potts5 x Ebony & Brass 20 Bore Snap Caps1 x Starkie Blue (A.K.A Smurf Poo)4 x Krieghoff HIVIZ Pro Sights2 x Black Barrel Case (83cm Internal)1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x VFG Barrel Cleaning Felts for 9mm (Box of 500)2 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)2 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)3 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Recknagel SOB3D Silencer (ERA LOC)1 x Recknagel SOB3D Silencer (Standard Thread)1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Schultz & Larsen Take Down Rifle Case1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)2 x Anschütz Biathlon Harness3 x Teague Precision Choke Key1 x AimZonic Plus Camo Sound Moderator1 x Jones Gun Nut Kit2 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights2 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]4 x Jones Original Pad Adjuster1 x AimZonic Compact Camo Sound Moderator1 x Jones Thru-the-Pad Adjuster2 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)2 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x Ziegler Quick Release Mount for Blaser - 40mm Rings2 x Krieghoff Navy Gun Slip1 x Krieghoff Factory Hanger Pin4 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master2 x WalkStool Set of Spare Red Spring1 x Schultz & Larsen Torx Key for Scope Mounts1 x WalkStool Comfort 65 (65cm/26in)2 x Krieghoff 28b Choke Wrench1 x Krieghoff .410g Choke Wrench1 x Krieghoff Trap Special / Pro Rib Wheel Locking Wrench3 x VFG Magnetic Felt Clamps for Vices - 80mm1 x Krieghoff Choke Multi Wrench2 x Krieghoff 12b Choke Wrench1 x VFG Magnetic Felt Clamps for Vices - 100mm1 x Krieghoff Stock Removal Wrench1 x Gerber Basic Fixed Blade Serrated1 x VFG Magnetic Felt Clamps for Vices - 150mm2 x Krieghoff Trigger Screw3 x Krieghoff K-Diamond Beanie - Navy1 x Recknagel Brass Front Sight Bead 2.5mm [11400-0250]1 x Krieghoff Sight Bead Blanking Screw2 x Krieghoff "K" Logo Cap Navy & White2 x Krieghoff "K" Denim Cap - Grey2 x Krieghoff "K" Mesh Cap - Black2 x Krieghoff "K" Logo Cap Black & White1 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x ERATAC M-Lok for QD Sling Swivel [T5510-0000]1 x Contessa Picatinny Rail - CZ 452 / 455 (0 MOA)1 x ERATAC ACI Elevation Turret [T0941-0000]1 x ERATAC Two-Piece Picatinny Rings (Lever)3 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x ERATAC Offset UNI-Interface to UNI-Interface [T0960-0005]1 x ERATAC M-Lok Picatinny Rail, 5 Slots [T5905-0008]1 x ERATAC Two-Piece Picatinny Rings (Nut)1 x ERATAC KeyMod Picatinny Rail. 7 Slots [T4907-0010]1 x ERATAC 30mm One Piece Extended Ring Mount (Lever)1 x ERATAC KeyMod Picatinny Rail. 9 Slots [T4909-0010]1 x ERATAC KeyMod Adaptor for Harris Bipod Adaptor [T4390-0007]1 x ERATAC Picatinny to Harris Bipod Adaptor, Stud (Nut)1 x ERATAC 30mm Ring with UNI-Interface [03680-5730]2 x Krieghoff Front Sight Bead (Small)1 x Gerber GDC Zip Blade1 x ERATAC M-Lok Adaptor for HK Hook [T5500-0000]1 x ERATAC Picatinny Riser Mount Block (QD)1 x ERATAC Offset UNI-Interface Picatinny Rail [T0913-0000]1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x ERATAC KeyMod Picatinny Rail. 5 Slots [T4905-0010]1 x ERATAC Backup Front Sight for Picatinny, 1.8mm [T0542-0355]2 x ERATAC Offset Picatinny to UNI-Interface Adaptor [T0530-0000]1 x ERATAC 34mm One Piece Extended Ring Mount (Nut)1 x ERATAC 34mm One Piece Extended Ring Mount (Lever)1 x Krieghoff Pro Choke Box1 x Recknagel Picatinny Rail Mauser M18, Alu, 20 MOA [..202X]1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x Contessa Picatinny Rail - Baikal (0 MOA)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Long (10 MOA)1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Contessa Satin Chromed Picatinny Rail - Howa Short (20 MOA)1 x Contessa One Piece QD Extended Picatinny Rail Mount1 x Krieghoff Ejector Ball and Spring1 x Contessa Spare Blaser Mounting Clamp Parts1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (20 MOA)1 x Krieghoff Fine Leather Gun Case (K-80 Parcours)1 x Krieghoff K-80 Sport Logo Cap Black & Red2 x Krieghoff Achievement Badge 200 Straight (Blue)1 x Krieghoff "K" Denim Cap - Navy1 x Krieghoff 2013 Badge (Collectors Badge)1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Contessa CZ 527 Euro Rail for Quick Release Mount1 x K-80 Stock Weight for Balance System1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8034]1 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 02 [8722]1 x Used Sako P94S, Wooden Stock (.22 LR)1 x Recknagel 19mm Dovetail Ring Mounts 30mm1 x Contessa Picatinny Rail - Tikka M590/M595 (0 MOA)1 x CR2032 Camelion Lithium Battery1 x Bauer - One Piece Railmount 25.4mm (11mm High)1 x Krieghoff K-Diamond Beanie - Heather Grey1 x Recknagel Weaver Bases - Browning A-Bolt III [57080-302T]1 x Contessa Satin Chromed Picatinny Rail - Sako 85 XS (0 MOA)1 x Contessa Sako 75/85 Long Euro Rail for Quick Release Mount1 x Krieghoff C-Clips (E-Clips)1 x ERATAC Picatinny Extended Riser Mount (Nut)1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (Tri-Nut)1 x ERATAC UNI-Interface Picatinny Rail, 56mm [T0905-0008]2 x Schultz & Larsen Superdome Moderator (Over Barrel)1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x Silva ex10 Distance Pedometer - White1 x Contessa QD Forward Extended Picatinny Rail Mount for Blaser1 x K-80 Standard Trigger - Gold Titanium1 x Recknagel SOB01 Silencer (Standard Thread)1 x Contessa Ultra Low Quick Release Mount for Zeiss CP/Doctor1 x WalkStool Spare Leg Joints1 x K-80 Forward Position Trigger - Black Titanium1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x VFG Adaptor for VFG Rods Brass1 x Krieghoff Spares Kit1 x Krieghoff Comb Wrench (T-Handle)1 x Gerber Gator Combo Replacement Saw1 x VFG Brass Adaptor for VFG Rod 4-4.5mm (Spare)1 x Contessa Picatinny Rail - Bergara B14 Long (0 MOA)1 x Contessa Blued Steel Picatinny Rings - 36mm (8mm BH)1 x Contessa Blued Steel Tactical Picatinny Rings - 30mm (10mm BH)1 x Contessa Lightweight Alu Picatinny Rings - 40mm (8mm BH)2 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Contessa Lightweight Alu Picatinny Rings - 1 Inch (8mm BH)2 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Silva Pavé Sport Bike Light White/Black1 x Recknagel Ring Base for Rear Sight [16510-0185]1 x Contessa Picatinny Rail - Sako S20 (0 MOA) - Extended
Manufacturers
Useful Information