Recknagel Picatinny Rail Sako Short, Alu [..0014]

£130.10
20% VAT incl.


  • Model:57050-0014
Recknagel Picatinny Aluminium Rail for Sako 75/85 Short
Black anodised

Will Fit Sako 75 / 85 / MA05 / I / II / III / MA05 / XS / SM / S
Height of Base - 12.5mm
Code: - 57050-0014

Contents Supplied
- 1x Black Anodised Rail

To mount the rail, separate the rail from the tapered bases. Push the bases onto the Sako receiver and tighten the two vertical locking grub screws to hold in the bases in place. Remount the rail onto the bases.

Dimensions of Adjustments:
The Rail Length is 132mm.
Bases Length: 21mm
Bases Center to Center: Adjustable from 83mm to 121mm
Distance Between Bases: Adjustable from 59mm to 92mm

There is also a picatinny rail designed to fit the Sako 75/85 Medium and Long actions - Recknagel Picatinny Rail 57050-0114.
Always check the measurements on your rifle before ordering.

Please Note that some Sako 75 actions have quite high tolerances and for that reason it is possible that the mount will be tight on the cone. We have to make it this way as a loose mount will not hold zero. Some hand fitting may be required. This is easily done and we can advise on the correct method should you experience this problem. If you are not experienced or competent in this work, please contact us or send it back for a full refund. If you attempt to make alterations to this rail, please be aware that once the mount has been altered, we are unable to provide a refund or accept a return.

For more information about scope mounts and problems mounting a scope, contact Alan Rhone Ltd on 01978 66 00 01.
1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)3 x Schmierfix Grease by Liqui Moly1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes2 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)2 x VFG Intensive Barrel Cleaning Felts for 6.5mm (Box of 50)1 x VFG 3 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor2 x Recknagel SOB3D Silencer (ERA LOC)1 x Recknagel Replacement Polyform Lever [00088-5700]2 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)2 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)2 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)3 x Parker Hale Thread to 8-32 Thread Converter1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Jones Original Pad Adjuster1 x Krieghoff Trigger Screw1 x ERATAC Bubble Level [T0940-0002]1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x VFG Magnetic Felt Clamps for Vices - 125mm1 x WalkStool Spare Leg Joints2 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x WalkStool Comfort 65 (65cm/26in)1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x Contessa Lightweight Alu Picatinny Rings - 1 Inch (8mm BH)1 x Contessa Blued Steel Picatinny Rings - 40mm (14.5mm BH)1 x Krieghoff Spares Kit1 x EX Demo - Gerber Steady Tool (Phone Tripod)1 x Gerber Paraframe II Fine Edge Knife1 x Bear Grylls Pocket Tool1 x Recknagel Swarovski Rail Components for Optilock Base - 5mm BH1 x Recknagel One Piece Tip-off Mounts for Swarovski [57553-0110]1 x VFG Adaptor for Parker Hale English Rods (over 7mm)1 x VFG Intensive Barrel Cleaning Felts for 10.3mm (Box of 30)1 x VFG Intensive Barrel Cleaning Felts for 7mm (Box of 50)1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Contessa Lightweight Alu Picatinny Rings - 40mm (8mm BH)1 x Contessa Lightweight Alu Picatinny Rings - 36mm (8mm BH)1 x Gerber Basic Fixed Blade Serrated1 x VFG Intensive Barrel Cleaning Felts for .45 (Box of 30)1 x Contessa Quick Release Mount for Swarovski Rail
Manufacturers
Useful Information