Krieghoff Barrel / Stock Stickers

£2.50
20% VAT incl.

Available Options

  • Model:BARREL-STICKER
Krieghoff Barrel / Stock Stickers
Available in Gold, Silver or White.

These high quality vinyl sticker with the "Krieghoff" text logo are designed to be transferred to your Krieghoff Barrels or Stock.

The stickers come as a set of two. So you can attach one either side of your barrels, or attach one to your barrel and one to your stock.

Size: 149mm x 17.5mm
Choose your colour from the drop-down menu above.

How to Apply your Stickers

Step 1 - Prepare It
Lay your sticker on a clean and flat surface with the backing tape (white side) face down and rub over the application tape (clear side) with your squeegee or credit card to ensure the application tape has a good bond to the vinyl letters.

Step 2 - Peel It
Check the positioning of where your sticker will go, so you're ready for the next stage.
Next, peel the application tape (clear side) away from the backing paper (white side). Your sticker letters will now be held by the application tape.
Carefully place the the application tape on to your barrels. Check the alignment as you place it down.

Step 3 - Rub It
While your sticker in laying on your barrels in position, start by rubbing over the application tape and letters gently, and then increase the pressure and firmly rub with your squeegee or credit card. Make sure you cover each letter thoroughly.

Step 4 - Remove It
Carefully peel away the application tape at an angle and corner to corner. The letters should all be transferred onto your barrel. If they are still attached to the application tape, lay the application tape back down and rub over the letter again with the squeegee or credit card. Now, try again until the whole sticker has been transferred.
Your new Krieghoff Barrel / Stock Sticker should now be in place and ready to show off.
If your letters are not coming away from the application tape as you're peeling the application tape off, lay the application tape back over the letter and use the squeegee to rub over the letter again.

Sticker Removal
If you decide to remove the stickers for any reason. Use some light heat such as a hair dryer to aid the removal. The adhesive is permanent but will not damage or mark your barrels. Do not use any abrasive materials or solvents to remove the stickers as this may cause damage to the finish of your barrels.

Postage
We send the Krieghoff Barrel & Stock Stickers with a piece of card to prevent the stickers from being damaged in transit.



You might also like...

1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)3 x Schmierfix Grease by Liqui Moly1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x VFG Intensive Barrel Cleaning Felts for 6.5mm (Box of 50)1 x VFG 3 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor2 x Recknagel SOB3D Silencer (ERA LOC)1 x Recknagel Replacement Polyform Lever [00088-5700]2 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)2 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)2 x Parker Hale Thread to 8-32 Thread Converter1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Jones Original Pad Adjuster1 x Krieghoff Trigger Screw1 x ERATAC Bubble Level [T0940-0002]1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x VFG Magnetic Felt Clamps for Vices - 125mm1 x WalkStool Spare Leg Joints2 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x WalkStool Comfort 65 (65cm/26in)1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x Contessa Lightweight Alu Picatinny Rings - 1 Inch (8mm BH)1 x Contessa Blued Steel Picatinny Rings - 40mm (14.5mm BH)1 x Krieghoff Spares Kit1 x EX Demo - Gerber Steady Tool (Phone Tripod)1 x Gerber Paraframe II Fine Edge Knife1 x Bear Grylls Pocket Tool1 x Recknagel Swarovski Rail Components for Optilock Base - 5mm BH1 x Recknagel One Piece Tip-off Mounts for Swarovski [57553-0110]
Manufacturers
Useful Information