K-80 Stock Bolt & Weight Balance System

£130.00
20% VAT incl.

Available Options

  • Model:K80STOCKWEIG
K-80 Stock Weight System - Bolt & Weight/s

The stock screw system is installed in the stock bolt access hole under the recoil pad. Installation is simple and involves only removing the original stock bolt and replacing it with the new longer stock bolt.
Please Note: Some stocks may have been shortened along with the stock bolt. To ensure you don't fit the new bolt and risk damaging your gun, please check the length of your existing bolt. You should not be exceeding 8 turns of the stock bolt when fitting. More than 8, feel free to contact us regarding shortening the bolt length.

The length of the longer stock bolt is 292mm.
Length of stock bolt from thread to mid piece is 168mm. This replacement bolt is designed to fit in place of existing stock bolts of 160mm in length.
The washers provide a slight amount of spring tension when tightening up the stock bolt. Please note the washer arrangement in the photo and the Stock Weight Instruction Sheet.

The balance screw carries an adjustable weight that can be positioned anywhere on the top section of the balance screw. The longer stock bolt itself weights an additional 40g in weight to the standard bolt and each weight adds another 30g. A possible 5 weights can be added to the longer stock bolt, totalling 150g. This added to the additional 40g of the stock bolt means you can add up to 190g to the rear end of the gun.

Also available for the K-80 Balance System are the K-80 Barrel Weights, combining both systems provides maximum flexibility in handling configuration.

There are different Options for purchasing:
- Stock Weight Screw with ONE Stock Weight
- Stock Weight Screw with TWO Stock Weights
- Additional Individual Weights are available.

We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

3 x Krieghoff Woven Fabric Patch3 x Krieghoff Navy Gun Slip2 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)7 x Krieghoff HIVIZ Pro Sights1 x Schultz & Larsen Professional Bipod by Spartan4 x Anschütz Biathlon Harness2 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x VFG Barrel Cleaning Felts for .44 (Box of 250)2 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm3 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm5 x Krieghoff Brass Front Sight Bead2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Recknagel Picatinny Rail Savage Short 0 MOA, Alu [..0093]1 x Contessa Picatinny Rail - Anschutz 54/64 (20 MOA)3 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA)2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]2 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)4 x Krieghoff Spares Kit2 x Krieghoff Trigger Screw2 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)2 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 02 [8717]2 x Krieghoff Front Sight Bead (Standard)2 x AG3 / 392A Alkaline Batteries (10 Pack)1 x Bauer Outdoor 10x25 Binoculars3 x Jones Original Pad Adjuster2 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)2 x Krieghoff Fine Leather Gun Case (K-80 Parcours)2 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8335]1 x Bauer HD Series 8x25 Binoculars1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 02 [8722]5 x Black Barrel Case (83cm Internal)1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8034]1 x Krieghoff C-Clips (E-Clips)1 x K-80 Barrel Weight Balance System2 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8525]2 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8005]1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8336]2 x Krieghoff Brass Mid Sight Bead2 x Krieghoff Shell Bag3 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 03 [8733]3 x Krieghoff Front Sight Bead (Small)4 x Krieghoff Ejector Ball and Spring2 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 04 [8331]1 x Bauer Outdoor 8x21 Binoculars2 x Jones Gun Nut Kit3 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat C1 [8280]1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x AimZonic Compact Camo Sound Moderator1 x K-80 Forward Position Trigger - Titanium2 x K-80 Forward Position Trigger - Gold Titanium1 x Schultz & Larsen Take Down Rifle Case6 x Briley T Wrench for K-80 Parcours Briley Chokes3 x Custom Rifles of Great Britain by Bruce Potts1 x Black Leather Shell/Cartridge Pouch1 x Walkstool Steady2 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]2 x Krieghoff Choke Multi Wrench2 x Krieghoff .410g Choke Wrench2 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x Recknagel SOB3D Silencer (Standard Thread)1 x K-80 Forward Position Trigger - Steel1 x WalkStool Set of Spare Red Spring2 x Ebony & Brass 20 Bore Snap Caps2 x Krieghoff "K" Collectors Badge1 x WalkStool Comfort 65 (65cm/26in)2 x AimZonic Plus Camo Sound Moderator1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)2 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x Krieghoff 2018 DTL Badge (Collectors Badge)1 x ERATAC Bubble Level [T0940-0002]1 x Briley 20b Speed Wrench - For Krieghoff1 x MSA Sordin - Hygiene Kit - Foam Seals2 x Starkie Blue (A.K.A Smurf Poo)4 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail2 x Krieghoff Safety Catch Locking Screw Wrench2 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Teague Precision Choke Key1 x Krieghoff Trigger & Selector Locking Wrench2 x Krieghoff Trap Special / Pro Rib Wheel Locking Wrench3 x Krieghoff Extended Pillars for Adjustable Comb4 x Schmierfix Grease by Liqui Moly2 x K-80 Standard Trigger - Gold Plated1 x Krieghoff Comb Wrench (T-Handle)2 x K-80 Forward Position Trigger - Gold Plated1 x Krieghoff K80 Speed Wrench for KTW Chokes2 x Krieghoff 28b Choke Wrench3 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes4 x Krieghoff Stock Removal Wrench1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)2 x Ziegler Quick Release Mount for Blaser - 34mm Rings2 x ERATAC ACI Bubble Level [T0940-0000]1 x Recknagel Weaver Bases - Winc. 70 Mag. <1964 [.-3095]2 x Contessa Picatinny Rail - Browning A Bolt 1 Short (0 MOA)2 x Contessa Picatinny Rail - Sabatti Rover Short (0 MOA)1 x Recknagel Weaver Bases - Winc. 70 Mag. >1964 [.-3025]1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x VFG Barrel Cleaning Felts for 9mm (Box of 500)2 x ERATAC UNI-Interface Picatinny Rail, 56mm [T0905-0008]1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount1 x Recknagel Brass Front Sight Bead 2.5mm [11400-0250]1 x Contessa QD Both Extended Picatinny Rails Mount for Blaser1 x Recknagel Weaver Bases - Browning BAR/BLR [57080-3003]1 x Krieghoff "K" Logo Cap Navy & White1 x Recknagel Weaver Bases - H&K SLB 2000 [..-3008]1 x Krieghoff "K" Mesh Cap - Black1 x Krieghoff "K" Denim Cap - Navy2 x Recknagel Weaver Bases - Browning Mauser [..-3057]1 x Recknagel Weaver Bases - FFV Carl Gustaf 4000 [.-3042]2 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail1 x Recknagel Weaver Bases - Benelli ARGO [57080-3076]1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x Schultz & Larsen Picatinny Rail for Victory (0 MOA)1 x K-80 Forward Position Trigger - Black Titanium1 x Schultz & Larsen Thunderdome Moderator (Muzzle Mounted)1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Contessa QD Mount for HIK-Micro Panther (Picatinny)2 x Krieghoff 12b Choke Wrench1 x Krieghoff Achievement Badge 200 Straight (Blue)1 x Clearance Americase Cordura Case Cover (32x11x3")1 x Recknagel Picatinny Rail Browning BAR, Alu [..0003]1 x Recknagel Picatinny Rail Anschutz 1780, Alu [..002B]1 x Recknagel SECURA Sling Swivel - 25.4mm Wide - 6mm [22009-3000]1 x Recknagel Barrel Banded Front Ramp [12530-....]1 x Recknagel Weaver Bases - Anschutz 1780 [57080-302B]1 x Recknagel Grip Cap Full Domed [24000-0100]1 x Recknagel Tactical Ring Inlays 30mm to 1" [T0991-0000]1 x ERATAC QD Sling Swivel - Loop Swivel [T0510-0001]1 x Ex-Demo Krieghoff K-20 1-Barrel Americase (No Cover)1 x Silva Map Measurer (Mechanical)2 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x Bauer ED 8x42 Binoculars1 x Bauer ED 10x42 Binoculars1 x Gerber Paraframe II Fine Edge Knife1 x Schultz & Larsen Picatinny Rings 30mm, 4mm BH, Steel1 x Clearance Krieghoff Classic Rifle Americase (No Cover)1 x Krieghoff Achievement Badge 100/3001 x Schultz & Larsen Weaver Rings 30mm, 7mm BH, Steel1 x Krieghoff 2012 Badge (Collector's Badge)1 x Schultz & Larsen Picatinny Rail for Tikka T3 / T3X (20 MOA)1 x ERATAC KeyMod Adaptor for HK Hook [T4500-0000]1 x Contessa Picatinny Rail - Tikka T3 / T3X (0 MOA)2 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor1 x Clearance Krieghoff K-20 2-Barrel Americase (No Cover)1 x Schultz & Larsen Thunderdome Moderator (Over Barrel)1 x Recknagel Grip Cap Compartment1 x Ex-Demo Krieghoff K-20 1-Barrel Americase (No Cover)1 x Schultz & Larsen Picatinny Rail for Legacy (0 MOA)1 x Contessa Sako 75/85 Short Euro Rail for Quick Release Mount1 x Contessa Picatinny Rail - Baikal (0 MOA)1 x K-80 Standard Trigger - Steel1 x VFG Pull Through Pocket Set for .22 Upwards1 x ERATAC 34mm One Piece Extended Ring Mount (Nut)1 x Recknagel Mount for Docter & Zeiss Compact [57070-0000]1 x Contessa 30mm Rings for Simple Black - 7.5mm (High)1 x VFG 3 Piece Aluminium Cleaning Rod for 7mm and Over, + Adaptor1 x ERATAC Backup Front Sight for Picatinny, 1.8mm [T0542-0355]1 x Recknagel SECURA Sling Swivel Magnum 25.4mm [22011-9500]1 x Recknagel Picatinny Bases - Schultz & Larsen2 x K-80 Standard Trigger - Black Titanium2 x Krieghoff Pro Choke Box1 x CR2032 Camelion Lithium Battery1 x Bauer HD 8x42 Binoculars1 x Contessa 6mm Rib Blank Euro Rail Base for Quick Release Mount1 x Recknagel Picatinny Rail Winchester Mod.70 Long, Alu [0124]1 x Recknagel Weaver/Picatinny Mounts for Zeiss Rail 45º (Tri-Nut)1 x Contessa 30mm Rings for Simple Black - 10.0mm (X-High)1 x Recknagel 25.4mm/1 inch Ring Components - 5mm BH1 x Recknagel Super Express 2 Leaf Sight [15400-3036]1 x Contessa Blued Steel Picatinny Rings - 40mm (14.5mm BH)1 x Recknagel Picatinny Rail Winchester Mod.70 WSM, Alu [0169]1 x Krieghoff "K" Logo Cap Black & White1 x ERATAC 30mm Ring with UNI-Interface [03680-5730]1 x Recknagel Picatinny Rail Winchester XPR Long, Alu [012V]1 x Recknagel Picatinny Rail Winchester SXR Vulcan, Alu [001J]2 x Contessa Picatinny Rail - Winchester 70 X-Long (0 MOA)1 x Contessa Picatinny Rail - Winchester XPR Long (0 MOA)1 x Recknagel Weaver Bases - FFV Carl Gustaf 1900 [.-3005]1 x Contessa CZ 527 Euro Rail for Quick Release Mount1 x Contessa Browning X-Bolt L Euro Rail Base for QR Mount1 x Bauer - One Piece Railmount 25.4mm (11mm High)1 x Contessa Sauer 202 Magnum Euro Rail Base for QR Mounts1 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x Contessa Picatinny Rail - Remington 700 Long Extended (0 MOA)1 x Contessa Shiny Chromed Picatinny Rail - Remington 700 Long (10 M1 x Contessa Picatinny Rail - Remington 700 Short (30 MOA)1 x Contessa Tikka T3 Euro Rail Base for Quick Release Mount1 x VFG Intensive Barrel Cleaning Felts for .44 (Box of 30)1 x Contessa Picatinny Rail - Remington 700 Short (20 MOA)1 x VFG Brass Adaptor for VFG Rod 4-4.5mm (Spare)1 x Contessa Remington 700 Long Euro Rail for QR Mounts1 x Contessa Picatinny Rail - Tikka T3 / T3X (30 MOA)1 x Contessa Picatinny Rail - Sako 75/85 Short - Extended/Adjustable1 x Recknagel Picatinny Bases - Remington 700 (8-40)1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)1 x Contessa Picatinny Rail - Remington 700 Long (0 MOA)1 x Contessa Picatinny Rail - Winchester 70 WSM (20 MOA)1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (0 MOA)1 x Bauer - Aluminium 11mm Dovetail 30mm Rings (14mm High)1 x Recknagel Weaver Bases - Chapuis Express [57080-3029]1 x Recknagel Weaver Bases - Haenel Jager 10 [..-302C]1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Contessa One Piece QD Picatinny Mount for Zeiss Rail1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Recknagel Picatinny Rail Sauer 101 (Pre #A020555), Alu [..002K]1 x Recknagel Weaver Bases - Savage (Round Back) [57080-3093]1 x Recknagel Weaver Bases - Sauer 80/90/92 [57080-3015]1 x Recknagel Weaver Bases - Weatherby Mark V/300 [.3023]1 x Krieghoff Sight Bead Blanking Screw
Manufacturers
Useful Information