Schultz & Larsen Scope Rings 30mm, Med/High (13mm BH)

£185.00
20% VAT incl.

Available Options

  • Model:SL6025
Schultz & Larsen Scope Rings
30mm - Medium/High (13mm Base Height)


Works with a 56mm Objective: If you have a scope with a 56mm objective lens, check whether the outer measurement is 62mm or smaller. If it is, then these rings will work, with an extremely low mounting height.

Machined out of a single block of high grade steel, gas nitrated and blued, the Schultz & Larsen "Slide & Lock" scope mounts are almost certainly the lightest all-steel scope mount made anywhere in the World. Incredibly strong and virtually rust proof, due to the special hardening process, these mounts are available in a range of heights and diameters.

Total Weight of Both Rings - 109g
Ring Diameter - 30mm
Base Height (BH) - 13mm
Code Ref: SL6025

Version Types:
The mounting dimensions on the Classic and Victory Actions are slightly different to the Legacy Short Action. The Slide & Lock Mounts sit slightly lower on the Legacy Action than then do on the Classic and Victory, meaning the cross-bolt, used to fix the mounts to the action, contacts on the top of the Legacy Action. To overcome this, a narrower diameter cross bolt is used for the Legacy to ensure it does not contact the action when fitting. If you have a Legacy, please select the correct Version above.

The key Torx 15 wrench for tightening is included. The mounts attach with Torx cross bolt and, for convenience, these can be changed to QD levers.

A unique feature of the mount is the rapid change Summer or Winter positions. On both Classic and Victory models there are two locating positions for the mount (The Legacy has only one due to the shortness of the action). The forward one is for Summer use and the rear for Winter. This moves the scope about 1/2" and compensates for the differing thickness of clothing. The scope can be slackened and repositioned without the need to remount. You should fire a couple of test rounds after moving to check zero but due to the exact alignment of both positions with the bore the zero will move only slightly if at all. Certainly less than 1 MOA (about 1" at 100 yards).

1 x Contessa Picatinny Rail - CZ 452 / 455 (0 MOA)1 x VFG Barrel Cleaning Felts for 8mm (Box of 500)1 x Schmierfix Grease by Liqui Moly1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Recknagel Picatinny Rail Heym SR21, Alu [..0022]1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Contessa Picatinny Rail - Anschutz 54/64 (20 MOA)1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Parker Hale Thread to 8-32 Thread Converter1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x Contessa QD Mount for HIK-Micro Panther (Picatinny)1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x Bauer ED 8x42 Binoculars1 x HJB 6-24x50 Rifle Scope (Mil-Dot)1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Recknagel Picatinny Rail Remington 700 S, 20 MOA, Alu [.2012]1 x VFG Barrel Cleaning Felts for 9mm (Box of 40)1 x ERATAC Offset UNI-Interface Picatinny Rail [T0913-0000]1 x VFG Barrel Cleaning Felts for .375 (Box of 40)1 x Bauer ED 8x32 Binoculars1 x VFG Adaptor for VFG Rods Brass1 x Recknagel Weaver Bases - Heym SR 20 [57080-3060]1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x VFG Brass Adaptor for VFG Rod 4-4.5mm (Spare)1 x Recknagel QD Sling Swivel Socket - Fixed Step, Raised [..-1020]1 x VFG Intensive Barrel Cleaning Felts for .375 (Box of 40)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x Recknagel Sling Swivel Adaptor HK-Hook [T0510-0000]1 x Contessa 25.4mm Rings for Simple Black - 2.5mm (Low)1 x Recknagel Picatinny Rail Mauser M12, Alu [..002L]1 x Contessa Remington 700 Short Euro Rail Base for QR Mount
Manufacturers
Useful Information