Schultz & Larsen Scope Rings 30mm, Med/High (13mm BH)

£185.00
20% VAT incl.

Available Options

  • Model:SL6025
Schultz & Larsen Scope Rings
30mm - Medium/High (13mm Base Height)


Works with a 56mm Objective: If you have a scope with a 56mm objective lens, check whether the outer measurement is 62mm or smaller. If it is, then these rings will work, with an extremely low mounting height.

Machined out of a single block of high grade steel, gas nitrated and blued, the Schultz & Larsen "Slide & Lock" scope mounts are almost certainly the lightest all-steel scope mount made anywhere in the World. Incredibly strong and virtually rust proof, due to the special hardening process, these mounts are available in a range of heights and diameters.

Total Weight of Both Rings - 109g
Ring Diameter - 30mm
Base Height (BH) - 13mm
Code Ref: SL6025

Version Types:
The mounting dimensions on the Classic and Victory Actions are slightly different to the Legacy Short Action. The Slide & Lock Mounts sit slightly lower on the Legacy Action than then do on the Classic and Victory, meaning the cross-bolt, used to fix the mounts to the action, contacts on the top of the Legacy Action. To overcome this, a narrower diameter cross bolt is used for the Legacy to ensure it does not contact the action when fitting. If you have a Legacy, please select the correct Version above.

The key Torx 15 wrench for tightening is included. The mounts attach with Torx cross bolt and, for convenience, these can be changed to QD levers.

A unique feature of the mount is the rapid change Summer or Winter positions. On both Classic and Victory models there are two locating positions for the mount (The Legacy has only one due to the shortness of the action). The forward one is for Summer use and the rear for Winter. This moves the scope about 1/2" and compensates for the differing thickness of clothing. The scope can be slackened and repositioned without the need to remount. You should fire a couple of test rounds after moving to check zero but due to the exact alignment of both positions with the bore the zero will move only slightly if at all. Certainly less than 1 MOA (about 1" at 100 yards).

2 x Contessa Satin Chromed Picatinny Rail - Sako 85 XS (20 MOA)1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)2 x AimZonic Compact Camo Sound Moderator1 x Contessa Satin Chromed Steel Picatinny Rings - 30mm (8mm BH)1 x Contessa 30mm Rings for Simple Black - 10.0mm (X-High)1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Contessa Tactical One Piece QD Picatinny Ring Mount 30mm, 20 MOA1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x ERATAC Bubble Level [T0940-0002]1 x Recknagel Weaver Bases - Winc. 70 Mag. <1964 [.-3095]1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x ERATAC Offset UNI-Interface for Docter Sight [T0930-0000]1 x Contessa Spare Rail Screws 6-48 x 8.5mm Long1 x Contessa Spare Blaser Mounting Clamp Parts1 x VFG Barrel Cleaning Felts for .375 (Box of 40)1 x AimZonic Plus Camo Sound Moderator1 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x Contessa Tikka T3 Euro Rail Base for Quick Release Mount1 x Contessa QD Mount for Blaser R8/R93 for Zeiss/Leica/Docter Rail1 x Contessa Browning BAR Euro Rail for Quick Release Mount1 x Contessa Sako 75/85 Short Euro Rail for Quick Release Mount1 x Contessa Picatinny Rail - Sauer 200 Long (10 MOA)1 x Krieghoff Sight Bead Blanking Screw1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x VFG Barrel Cleaning Felts for .44 (Box of 30)1 x Custom Rifles of Great Britain by Bruce Potts1 x Contessa Picatinny Rail - Anschutz 54/64 (30 MOA)1 x Contessa Picatinny Rail - Browning X Bolt Short (20 MOA)1 x Contessa QD Extra Extended Front & Rear Picatinny Rail - Blaser1 x VFG Barrel Cleaning Felts for 7mm (Box of 50)1 x Contessa CZ 527 Euro Rail for Quick Release Mount1 x Black Barrel Case (83cm Internal)1 x WalkStool Set of Spare Red Spring1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x Schmierfix Grease by Liqui Moly2 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA)1 x Gerber GDC Zip Blade1 x Contessa 35mm Rings for Simple Black - 7.5mm (High)1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 50)1 x Contessa 30mm Rings for Simple Black - 5.0mm (Med)1 x Contessa Picatinny Rail - Browning X Bolt Short (0 MOA)1 x Contessa Sauer 202 Standard Euro Rail Base for QR Mount1 x Contessa Browning European Euro Rail for Quick Release Mount1 x Contessa Picatinny Rail - Bergara B13 (0 MOA)1 x Contessa Picatinny Rail - Anschutz 54/64 (20 MOA)1 x Gerber Myth Series Fixed Saw1 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser1 x Contessa Remington 700 Short Euro Rail Base for QR Mount1 x Contessa 30mm Rings for Simple Black - 7.5mm (High)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x Ex-Display Gerber GDC Zip Hex1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (20 MOA)1 x Contessa QD Forward Extended Picatinny Rail Mount for Blaser1 x Gerber Metolius Pocket Folder1 x Gerber Basic Fixed Blade Serrated1 x Contessa 25.4mm Rings for Simple Black - 7.5mm (High)1 x VFG Barrel Cleaning Felts for 10.3mm (Box of 30)1 x WalkStool Spare Leg Joints1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Contessa Picatinny Rail - Tikka T1 / T1X (20 MOA)
Manufacturers
Useful Information