VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)

£13.73
20% VAT incl.


  • Model:342628
VFG Intensive Barrel Cleaning Felts for 9mm
Code: 342628


These small felt screw-on pellets, which are calibre specific are used with the VFG Cleaning Rod to clean your barrel. The felts screw onto the cleaning rod tip and then passed down the barrel to give a smooth and effective clean. The intensive felt wads are embedded with aggressive/coarse phosphor bronze fibres for proper cleaning that will not damage a steel airgun barrel.

The 9mm felts are recommended for the following calibres: 9mm, .350 Rem. Mag., .358 Norma Mag., .38 SuperAuto, .357 SIG, .38-45 ACP, .38 Long Colt, .357 Mag., .38 WC.
See which Felts suit your Calibre >>>

Supplied as small box containing: 40 felt screw-on pellets
(Also available: 9mm standard felts - box of 50, for extensive usage and better value)

Instructions for Use:
1. Take Adapter and screw this onto VFG Cleaning rod No. 66889 (900 mm Long).
2. Screw a VFG felt cleaner onto the coarse thread of the adapter.
3. Place a second VFG felt cleaner onto the metric thread (used together a screw for the cleaning of shotguns)
4. Push the adapter with the two felts carefully through the barrel from the breech end and out of the muzzle. The special felts compress into the rifling and follow it exactly. The forward pellet removes the fouling out of the muzzle and by pulling back the rod, the dirty pellet drops off the metric thread, leaving the screwed pellet to polish the barrel by pushing the rod backwards and forwards.
5. If the barrel is to be oiled, screw VFG Rifle Cleaner onto the adapter, soak this thoroughly with weapon oil (Ballistol or Ustanol) and repeatedly move it back and forth in the barrel.
6. To remove the oil repeat steps 1 - 4.
7. In order to remove rubbed off metal, please use Intensive Cleaners.

Make sure that the barrel of your weapon is free after each cleaning operation.

See the VFG Barrel Cleaning Catalogue >>>

Also Available:
Small Box Quantities (Standard) Small Box Quantities (Intensive) Large Pack Quantities
4 - 4.5mm Standard Felts (100) 4 - 4.5mm Intensive Felts (100) N/A
.22 Standard Felts (80) .22 Intensive Felts (80) .22 Standard Felts (500)
6mm Standard Felts (50) 6mm Intensive Felts (50) 6mm Standard Felts (500)
6.5mm Standard Felts (50) 6.5mm Intensive Felts (50) 6.5mm Standard Felts (500)
7mm Standard Felts (50) 7mm Intensive Felts (50) 7mm Standard Felts (500)
7.5mm Standard Felts (50) 7.5mm Intensive Felts (50) 7.5mm Standard Felts (500)
8mm Standard Felts (50) 8mm Intensive Felts (50) 8mm Standard Felts (500)
9mm Standard Felts (40) 9mm Intensive Felts (40) 9mm Standard Felts (500)
9.3mm Standard Felts (40) 9.3mm Intensive Felts (40) 9.3mm Standard Felts (500)
.375 Standard Felts (40) .375 Intensive Felts (40) .375 Standard Felts (500)
10.3mm Standard Felts (30) 10.3mm Intensive Felts (30) N/A
.44 Standard Felts (30) .44 Intensive Felts (30) .44 Standard Felts (250)
.45 Standard Felts (30) .45 Intensive Felts (30) N/A


Features & Cleaning Instructions Video

1 x Recknagel Picatinny Rail Sauer 202 Std, Alu [..0080]2 x Contessa Picatinny Rail - Sako 75/85 Medium (0 MOA) Adjustable1 x Contessa Picatinny Rail - Sako 75/85 Medium (10 MOA) Adjustable2 x Recknagel Picatinny Rail Remington 700 L, Alu [..0112]1 x Krieghoff Spares Kit1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Krieghoff Pro Choke Box1 x Contessa Sako 75/85 Short Euro Rail for Quick Release Mount1 x WalkStool Set of Spare Red Spring1 x Contessa QD Mount for Blaser R8/R93 for Zeiss/Leica/Docter Rail1 x Contessa 40mm Rings for Simple Black - 6.0mm (Medium)1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Contessa Spare Blaser Mounting Clamp Parts1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)2 x Krieghoff Brass Mid Sight Bead1 x Contessa Quick Release Mount for Zeiss Rail1 x WalkStool Spare Leg Joints1 x MSA Sordin - Hygiene Kit - Foam Seals1 x Jones Original Pad Adjuster1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Contessa Blued Steel Picatinny Rings - 36mm (8mm BH)1 x Contessa Picatinny Rail - BRNO 98 (0 MOA)1 x Contessa CZ 550 Euro Rail for Quick Release Mount1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Contessa QD Low Mount for Yukon Photon Night Vision (Picatinny)1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Contessa Tactical One Piece Fixed Picatinny Ring Mount - 30mm1 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail4 x Schmierfix Grease by Liqui Moly1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Contessa 6mm Rib Blank Euro Rail Base for Quick Release Mount1 x AA x 4 Camelion Plus Alkaline Batteries1 x Recknagel Detachable Magnum Sling Swivel 25.4mm Loop - 8mm Stud1 x Contessa Quick Release Picatinny Extended Rail (Night Vision)2 x ERATAC QD Sling Swivel - Loop Swivel [T0510-0001]1 x AimZonic Compact Camo Sound Moderator1 x Krieghoff "K" Denim Cap - Navy1 x Recknagel QD Sling Swivel Socket - Fixed Step, Flat [..-1010]1 x Krieghoff "K" Denim Cap - Grey1 x Krieghoff Front Sight Bead (Small)1 x Ex-Demo Contessa One Piece QD Picatinny Mount Body1 x ERATAC Picatinny to Harris Bipod Adaptor, Sliding Block (Nut)1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x ERATAC Backup Front Sight for Picatinny, 1.8mm [T0542-0355]1 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x Contessa Picatinny Rail - Bergara B14 Long (0 MOA)1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x ERATAC ZFIX Telescopic Sight Alignment Aid [T0810-0000]1 x VFG Pull Through Match Pocket Set, for 4-4.5mm1 x Contessa Picatinny Rail - Browning X Bolt Short (0 MOA)2 x Contessa Picatinny Rail - Browning X Bolt Long (0 MOA)1 x Contessa Picatinny Rail - CZ 452 / 455 (20 MOA)1 x VFG 1 Piece Steel Short Cleaning Rod with 4-4.5mm (.177) Adaptor1 x VFG 3 Piece Aluminium Cleaning Rod for 7mm and Over, + Adaptor2 x Contessa Picatinny Rail - CZ 452 / 455 (10 MOA)1 x Contessa Picatinny Rail - Browning A Bolt 3 Long (0 MOA) Extended1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Gerber Descent - Folding Knife1 x Gerber Gator Combo Replacement Saw1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x Contessa Satin Chromed Picatinny Rail - Sako 85 XS (0 MOA)1 x Contessa Shiny Chromed Picatinny Rail - Remington 700 Long (10 M1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Bauer - Aluminium 11mm Dovetail 30mm Rings (14mm High)1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Contessa Satin Chromed Picatinny Rail - Howa Short (0 MOA)1 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Ebony & Brass 20 Bore Snap Caps1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x ERATAC UNI-Interface Picatinny Rail, 85mm [T0908-0013]1 x Contessa QD Mount for Blaser for ATN X-Sight II1 x ERATAC ACI Elevation Turret [T0941-0000]1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x ERATAC ACI Bubble Level [T0940-0000]1 x ERATAC Two-Piece Picatinny Rings (Nut)1 x Contessa Picatinny Rail - Sauer 202 (0 MOA) Extended1 x Recknagel Standard Banded Swivel Ring [22620-....]1 x Recknagel Detachable Sling Swivel 20mm Loop - 6mm Stud1 x Recknagel QD Sling Swivel Socket - Slim Forearm [23100-5010]1 x ERATAC Special Use One Piece Ring Mount for S&B PMII1 x Krieghoff 12b Choke Wrench1 x Recknagel SECURA Sling Swivel - 25.4mm Wide - 6mm [22009-3000]1 x Krieghoff K-80 Sport Logo Cap Black & Red1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Recknagel Barrel Banded Front Ramp [12530-....]1 x ERATAC 30mm One Piece Extended Ring Mount (Lever)1 x Teague Precision Choke Key1 x Krieghoff Trigger Screw1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x ERATAC Backup Front Sight for Picatinny, 1.35mm [T0543-0355]1 x ERATAC Offset Backup Sight Kit for Picatinny, 1.8mm [T0540-1355]1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Recknagel Weaver Bases - Winc. 70 Mag. <1964 [.-3095]1 x Hi Viz - How to Become a Better Shooter2 x Contessa Picatinny Rail - Browning X Bolt Short (20 MOA)1 x Schultz & Larsen Take Down Rifle Case1 x Contessa 30mm Rings for Simple Black - 5.0mm (Med)1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA)1 x Contessa Picatinny Rail - Browning X Bolt Super Short Extended1 x Contessa Picatinny Rail - CZ 527 (0 MOA)1 x Contessa Picatinny Rail - Browning X Bolt Long (20 MOA)1 x Contessa Picatinny Rail - Browning X Bolt Super Short (0 MOA)
Manufacturers
Useful Information