Recknagel Weaver/Picatinny Mounts for Zeiss 45º (QD Lever)

£228.11
20% VAT incl.


  • Model:57545-0700
Recknagel Weaver/Picatinny Mounts for Zeiss 45º
45º Angle is familiar with the modern Zeiss (ZM), Docter (Z Rail), Meopta (MR Rail), Minox (IS Rail), Leica (Leica Rail) and Schmidt & Bender (LMZ) Rail Scopes.
with QD Polyform Levers

Also available in Tri-Nut Version

Height of Base - 7mm
Contents Supplied - 2x Tip-Off Mounts, 1x Wrench
Code Ref: 57545-0700

These Tip-off mounts are designed to be used with the Zeiss Rifle Scopes, especially the Zeiss Diarange and all scopes with 45º angle. The mounts give a low overall height with the height of the bases being only 7mm. The 2 Tip off blocks have a weaver/picatinny profile and are mounted onto the rail and tightened using Quick Detachable Polyform Levers.

Fitting Tips:
- Remove the two 45º Mounting Blocks from the Recknagel Mounts
- Drop the 45º Mounting Blocks into the Zeiss Rail slot, with the wider part of the block in first.
- Align the holes of the base component of the Recknagel Mount with the 45º Mounting Blocks, then fit the screw going through the Recknagel Mount into the 45º Mounting Block.
- Tighten the screws up fully for both of the 45º Mounting Blocks. Then afterwards slacken them off by a 1/8 turn.
- You are now able to slide the mount into position to suit the picatinny rail or weaver bases.
- We would advise to position the mount on the rail or bases one at a time, tighten up the 45º Mounting Block screws on one of the bases first.
- Once this is secured, repeat for the second base. Carefully align the second base in position and lift it off the rail/weaver base in order to tighten up the 45º Mounting Blocks.

The Recknagel Catalogue has a wide range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Recknagel Catalogue is available to browse online.
2 x K-80 Stock Weight for Balance System1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Krieghoff Pro Choke Box1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)2 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes2 x Krieghoff K80 Speed Wrench for KTW Chokes1 x Krieghoff Brass Front Sight Bead1 x Jones Gun Nut Kit1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Krieghoff Trigger & Selector Locking Wrench1 x Jones Original Pad Adjuster1 x Krieghoff Spares Kit1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)2 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)1 x Krieghoff Comb Wrench (T-Handle)1 x Krieghoff "K" Mesh Cap - Black1 x Krieghoff Woven Fabric Patch1 x Krieghoff Factory Hanger Pin1 x Krieghoff Sight Bead Blanking Screw1 x VFG Barrel Cleaning Felts for 9mm (Box of 500)1 x K-80 Standard Trigger - Gold Plated1 x K-80 Standard Trigger - Gold Titanium1 x Contessa Spare Ring-to-Base Screws1 x Schultz & Larsen Scope Rings 30mm, X-High (20mm BH)1 x Krieghoff HIVIZ Pro Sights2 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Krieghoff Choke Multi Wrench1 x Teague Precision Choke Key1 x Krieghoff Safety Catch Locking Screw Wrench1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Krieghoff "K" Collectors Badge1 x K-80 Forward Position Trigger - Gold Plated1 x K-80 Standard Trigger - Steel1 x K-80 Forward Position Trigger - Black Titanium1 x Briley 20b Speed Wrench - For Krieghoff
Manufacturers
Useful Information