VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)

£7.24
20% VAT incl.


  • Model:332066
VFG Barrel Cleaning Felts for 4-4.5mm
Code: (66800) 332066


These small felt screw-on pellets, which are calibre specific are used with the VFG Cleaning Rod to clean your barrel. The felts screw onto the cleaning rod tip and then passed down the barrel to give a smooth and effective clean. Ideal for .17 calibres

The 4-4.5 mm felts are recommended for the following calibres: 4 mm M 20, 4 mm, .17 Rem, 177 HMR
See which Felts suit your Calibre >>>

Supplied as small box containing: 100 felt screw-on pellets

To be used with VFG Cleaning Rod for 4-4.5mm Calibres.

Instructions for Use:
1. Take Adapter No. 66803 and screw this onto VFG Cleaning rod No. 66801 (740 mm Long) or 66802 (300 mm Short).
2. For the preliminary cleaning operation screw a VFG Super Intensive Cleaner onto the adapter.
3. Slowly push a VFG Super Intensive Cleaner through the barrel from the breech. When doing so, the special felt presses itself firmly into the grooves and follows the rifling. Repeat this procedure as often as is necessary.
4. For the final cleaning operation use normal VFG Rifle Cleaner No. 66800.
5. If the barrel is to be oiled, screw VFG Rifle Cleaner No. 66800 onto the adapter, soak this thoughly with weapon oil (Ballistol or Ustanol) and repeatedly move it back and forth in the barrel.
6. Perform the de-oiling of the barrel with normal VFG Rifle Cleaner No. 66800.

Make sure that the barrel of your weapon is free after each cleaning operation.

See the VFG Barrel Cleaning Catalogue >>>

Also Available:
Small Box Quantities (Standard) Small Box Quantities (Intensive) Large Pack Quantities
4 - 4.5mm Standard Felts (100) 4 - 4.5mm Intensive Felts (100) 4 - 4.5mm Standard Felts (500)
.22 Standard Felts (80) .22 Intensive Felts (80) .22 Standard Felts (500)
6mm Standard Felts (50) 6mm Intensive Felts (50) 6mm Standard Felts (500)
6.5mm Standard Felts (50) 6.5mm Intensive Felts (50) 6.5mm Standard Felts (500)
7mm Standard Felts (50) 7mm Intensive Felts (50) 7mm Standard Felts (500)
7.5mm Standard Felts (50) 7.5mm Intensive Felts (50) 7.5mm Standard Felts (500)
8mm Standard Felts (50) 8mm Intensive Felts (50) 8mm Standard Felts (500)
9mm Standard Felts (40) 9mm Intensive Felts (40) 9mm Standard Felts (500)
9.3mm Standard Felts (40) 9.3mm Intensive Felts (40) 9.3mm Standard Felts (500)
.375 Standard Felts (40) .375 Intensive Felts (40) .375 Standard Felts (500)
10.3mm Standard Felts (30) 10.3mm Intensive Felts (30) N/A
.44 Standard Felts (30) .44 Intensive Felts (30) .44 Standard Felts (250)
.45 Standard Felts (30) .45 Intensive Felts (30) N/A


Features & Cleaning Instructions Video

1 x Recknagel Picatinny Tri-Nut Rings 30mm [57030-0500]1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Recknagel SOB01 Silencer (Standard Thread)1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)2 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Recknagel One Piece QD Tip-off Picatinny Ring Mount [57530-5110]2 x Recknagel Picatinny QD Rings 30mm [57530-0500]1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)2 x Recknagel 19mm Dovetail Ring Mounts 30mm1 x Recknagel SOB Silencer ERA LOC Thread Bushing2 x Contessa 30mm Rings for Simple Black - 10.0mm (X-High)3 x Contessa Remington 700 Short Euro Rail Base for QR Mount1 x Contessa Rizzini Euro Rail Base for Quick Release Mount2 x Contessa Bettinsoli Euro Rail Base for Quick Release Mount2 x Contessa 34mm Rings for Simple Black - 8.0mm (Medium)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)2 x Contessa Sauer 202 Magnum Euro Rail Base for QR Mounts2 x Contessa Quick Release Mount for Zeiss Rail1 x Contessa Spare Ring-to-Base Screws2 x Contessa Spare Screw M10 for Anschutz/CZ Rails2 x Contessa Spare Rail Screws 6-48 x 8.5mm Long1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)2 x Contessa Spare Screw for Sako 75/85 Rails1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)3 x Contessa Quick Release Mount (Euro Rail) for ATN X-Sight II1 x Contessa Quick Release Mount for Burris/Nikon1 x ERATAC ACI Elevation Turret [T0941-0000]1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x ERATAC 30mm Ring with UNI-Interface [03680-5730]1 x ERATAC UNI-Interface Picatinny Rail, 56mm [T0905-0008]1 x Recknagel Extended Rail Remington 700 Long [57250-0112]1 x ERATAC 56mm Ring with UNI-Interface [03680-5757]1 x Recknagel Weaver/Picatinny Mounts for Zeiss Rail 45º (Tri-Nut)2 x ERATAC ACI Bubble Level [T0940-0000]1 x ERATAC ZFIX Telescopic Sight Alignment Aid [T0810-0000]1 x ERATAC 25.4mm Ring with UNI-Interface [03680-5726]1 x ERATAC 36mm Ring with UNI-Interface [03680-5736]1 x ERATAC UNI-Interface Picatinny Rail, 85mm [T0908-0013]1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)2 x Contessa 30mm Rings for Simple Black - 5.0mm (Med)2 x Contessa Sako 75/85 Short Euro Rail for Quick Release Mount1 x Contessa 25.4mm Rings for Simple Black - 5.0mm (Medium)1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount1 x Contessa Picatinny Rail - Merkel Helix (0 MOA)1 x Contessa Blued Steel Picatinny Rings - 1" (8mm BH)1 x Schmierfix Grease by Liqui Moly1 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser1 x Contessa Picatinny Rail - Sako A7 Short (20 MOA)2 x Contessa Merkel Helix Euro Rail for Quick Release Mount1 x Contessa 35mm Rings for Simple Black - 7.5mm (High)1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Contessa Picatinny Rail - Tikka T3 / T3X (0 MOA)2 x Contessa Sako 75/85 Long Euro Rail for Quick Release Mount1 x Contessa One Piece QD Picatinny Mount for Burris Scopes2 x Contessa Quick Release Picatinny Extended Rail (Night Vision)2 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x Contessa Sako 75/85 Medium Euro Rail for Quick Release Mount1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x Contessa Sauer 202 Standard Euro Rail Base for QR Mount1 x Contessa 6mm Rib Blank Euro Rail Base for Quick Release Mount1 x Contessa 34mm Rings for Simple Black - 6.5mm (Medium)1 x Contessa 40mm Rings for Simple Black - 6.0mm (Medium)1 x Contessa Browning BAR Euro Rail for Quick Release Mount1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x Recknagel Weaver Bases - Browning Eurobolt [..-3078]1 x Recknagel Weaver Bases - Browning X-Bolt [57080-301P]1 x Silva Dine Duo Kit - Purple/White1 x Recknagel Weaver Bases - Chapuis Express [57080-3029]1 x Contessa QD Extra Extended Front & Rear Picatinny Rail - Blaser1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Recknagel Weaver Bases - Browning T-Bolt [57080-301Q]1 x Contessa Blued Steel Tactical Picatinny Rings - 30mm (10mm BH)1 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Recknagel Weaver Bases - Browning A-Bolt I/II [57080-3020]1 x Contessa Ultra Low Quick Release Mount for Zeiss CP/Doctor1 x Recknagel Weaver Bases - Benelli ARGO [57080-3076]1 x Contessa QD Forward Extended Picatinny Rail Mount for Blaser1 x Recknagel Weaver Bases - Browning A-Bolt III [57080-302T]1 x Contessa QD Mount for Blaser for ATN X-Sight II1 x Recknagel Weaver Bases - Browning BAR/BLR [57080-3003]1 x Contessa Quick Release Picatinny Rail1 x Contessa QD Both Extended Picatinny Rails Mount for Blaser2 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x VFG Barrel Cleaning Felts for 10.3mm (Box of 30)1 x Contessa Picatinny Rail - Howa 1500 Short (0 MOA)1 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail1 x Contessa Quick Release Mount for Swarovski Rail1 x Recknagel Weaver Bases - FFV Carl Gustaf 2000 [.-3028]1 x ERATAC Picatinny Extended Riser Mount (Nut)1 x Recknagel Weaver Bases - Anschutz 1780 [57080-302B]1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail
Manufacturers
Useful Information