Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount

£71.56
20% VAT incl.


  • Model:BA31
Contessa Schultz & Larsen - Victory, Classic, Hunter & Ambassador
Euro Rail Base for use with Quick Release Mounts


Length: - 165mm
Weight: - 82g
Height - 5mm BH
Code: BA31
Material:
Blued Steel

Fitting: When fitting, we would always recommend using a thread locker adhesive on the screws. Fit the screws on the rear base first but do not tighten fully, then fit the front screws next but do not fully tighten. Gradually tighten one screw at a time in small increments until all screws are fully tightened and flush. This will ensure a good solid fit to the rifle.

Note: The two rear holes on this rail match up for the Victory, Classic, Hunter and Ambassador 21.8mm. But the second to third holes on the Victory & Ambassador are 2mm further apart than the holes on the Classic and Hunter. This means, the rail has incorporated elongated holes for the front base. This is to allow both of the model variations to fit. This has no loss of accuracy and due to the countersink and design of the hole, it will align perfectly centrally to the action.

For use with Contessa Part:
Quick Release Base (Bolt Action) Code Ref: SB02

This Quick Release Base is precision made by Contessa Alessandro & C. s.n.c. The fixed base is made to fit directly to your rifle, then you use the Contessa Quick Release Base, either one of the possible models available, and using it's QD clamping system you can attach the mount to the base. This system allows you to interchange scopes on a single rifle, and even change a scope to different rifles in seconds using the Contessa system.

The Contessa Euro Rail System -
Find Out More and How it Works

To see the available Quick Release Mounts - Click Here

Contents Supplied:
- 1 x Euro Rail Base for Schultz & Larsen,
- Screws
- Wrench

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.

Fitting and Features Video

1 x Contessa Picatinny Rail - Browning BAR (0 MOA)1 x Bauer Outdoor 8x21 Binoculars1 x Recknagel Picatinny Rail Heym SR21, Alu [..0022]1 x Recknagel SOB3D Silencer (Standard Thread)1 x Bauer HD Series 8x25 Binoculars1 x Recknagel SOB3D Silencer (ERA LOC)1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x Bauer Outdoor 10x25 Binoculars1 x Schultz & Larsen T-Handle Wrench (4mm Hex)1 x CR2032 Camelion Lithium Battery1 x Black Barrel Case (83cm Internal)1 x Schultz & Larsen Take Down Rifle Case1 x Anschütz Biathlon Harness1 x Contessa Shotgun Rib Mount for Red Dot Sights (Leica/Docter/Burris)1 x Contessa Tikka T1 Euro Rail for Quick Release Mount1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master2 x Schmierfix Grease by Liqui Moly1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Schultz & Larsen Torx Key for Scope Mounts1 x Schultz & Larsen Spare Screws for Picatinny Rails1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Schultz & Larsen Professional Bipod by Spartan1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x ERATAC Bubble Level [T0940-0002]1 x Schultz & Larsen Picatinny Rings 30mm, 4mm BH, Steel1 x Black Leather Shell/Cartridge Pouch2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Bauer - One Piece Railmount 25.4mm (11mm High)1 x Recknagel Picatinny Rail Steyr-Mannlicher L, 0 MOA, Alu [..0188]1 x Recknagel Picatinny Bases - Schultz & Larsen1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x Contessa Picatinny Rail - CZ 452 / 455 (0 MOA)1 x VFG Barrel Cleaning Felts for .22 (Box of 80)2 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Recknagel Picatinny Rail CZ 550 Magnum, Alu [..0064]1 x VFG Pull Through Pocket Set for .22 Upwards1 x ERATAC QD Sling Swivel - Loop Swivel [T0510-0001]1 x Contessa 25.4mm Rings for Simple Black - 2.5mm (Low)1 x Recknagel Grip Cap Full Domed [24000-0100]1 x Contessa Picatinny Rail - Ruger American (0 MOA)1 x Recknagel Picatinny Rail Mauser M12, Steel [..002L]1 x Contessa CZ 527 Euro Rail for Quick Release Mount1 x Recknagel Replacement Polyform Lever [00088-5700]1 x Recknagel Detachable Magnum Sling Swivel 25.4mm Loop - 8mm Stud1 x Contessa Picatinny Rail - Sauer 90 (0 MOA)1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Contessa Picatinny Rail - Sako S20 (0 MOA) - Extended1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Krieghoff "K" Collectors Badge1 x VFG Intensive Barrel Cleaning Felts for 9.3mm (Box of 40)1 x VFG Barrel Cleaning Felts for 9mm (Box of 500)1 x Winchester 3" Folding Knife1 x Schultz & Larsen Picatinny Rail for Classic DL (0 MOA)1 x Recknagel Blank 12mm Eurorail - 150mm1 x VFG Adaptor for Parker Hale English Rods (over 7mm)1 x Recknagel 11mm Dovetail to Picatinny Rail Adaptor [..1011]
Manufacturers
Useful Information