Recknagel Weaver/Picatinny Mounts for Zeiss Rail 45º (Tri-Nut)

£228.11
20% VAT incl.


  • Model:57945-0700
Recknagel Weaver/Picatinny Mounts for Zeiss Rail with 45º
45º Angle is familiar with the modern Zeiss (ZM), Docter (Z Rail), Meopta (MR Rail), Minox (IS Rail), Leica (Leica Rail) and Schmidt & Bender (LMZ) Rail Scopes.
with Tri-Nut Fastening

Also available in Quick Release Lever Version

Height of Base - 7mm
Contents Supplied - 2x Tip-Off Mounts and Wrench Key
Code Ref: 57945-0700

These Tip-off mounts are designed to be used with the Zeiss Rail Rifle Scopes with the 45º angle, especially the Zeiss Diarange. Fit to both Weaver and Picatinny Rails. The mounts give a low overall height with the height of the bases being only 7mm. The 2 Tip off blocks have a weaver/picatinny profile and are mounted onto the rail and tightened using the supplied wrench.

Fitting Tips:
- Remove the two 45º Mounting Blocks from the Recknagel Mounts
- Drop the 45º Mounting Blocks into the Zeiss Rail slot, with the wider part of the block in first.
- Align the holes of the base component of the Recknagel Mount with the 45º Mounting Blocks, then fit the screw going through the Recknagel Mount into the 45º Mounting Block.
- Tighten the screws up fully for both of the 45º Mounting Blocks. Then afterwards slacken them off by a 1/8 turn.
- You are now able to slide the mount into position to suit the picatinny rail or weaver bases.
- We would advise to position the mount on the rail or bases one at a time, tighten up the 45º Mounting Block screws on one of the bases first.
- Once this is secured, repeat for the second base. Carefully align the second base in position and lift it off the rail/weaver base in order to tighten up the 45º Mounting Blocks.

The Recknagel Catalogue has a wide range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Recknagel Catalogue is available to browse online.
1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 50)2 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)2 x VFG Barrel Cleaning Felts for 9mm (Box of 40)2 x VFG Adaptor for Parker Hale English Rods (over 7mm)2 x VFG Brass Adaptor for VFG Rod 4-4.5mm (Spare)2 x VFG Adaptor for US Rods 7-32 UNC (.22 and Over)2 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)2 x VFG Adaptor from M5 to 1/8" Aluminium2 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x ERATAC 30mm Ring with UNI-Interface [03680-5730]1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x K-80 Standard Trigger - Steel2 x Parker Hale Thread to 8-32 Thread Converter1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Complete Set for .1771 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x ERATAC 56mm Ring with UNI-Interface [03680-5757]1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x Recknagel Picatinny Rail Remington 700 L, Alu [..0112]1 x Recknagel Mount for Docter & Zeiss Compact [57070-0000]1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x VFG Adaptor for VFG Rods Brass1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)1 x Contessa Picatinny Rail - Sako A7 Short (20 MOA)1 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x Gerber Basic Fixed Blade Serrated1 x Schultz & Larsen Picatinny Rail for Victory (0 MOA)1 x VFG Quick Clean Felts for .22 (Box of 80)1 x Recknagel 11mm Dovetail to Picatinny Rail Adaptor [..1011]2 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x Schmierfix Grease by Liqui Moly1 x Gerber Myth Series Fixed Saw1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop - 6mm Stud1 x Gerber Powerframe Knife1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Intensive Barrel Cleaning Felts for .45 (Box of 30)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for 8mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for .44 (Box of 30)1 x VFG Intensive Barrel Cleaning Felts for .375 (Box of 40)1 x VFG Intensive Barrel Cleaning Felts for 10.3mm (Box of 30)1 x VFG Intensive Barrel Cleaning Felts for 9.3mm (Box of 40)1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 500)1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Schultz & Larsen T-Handle Wrench (4mm Hex)1 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x ERATAC Picatinny Extended Riser Mount (Nut)1 x Recknagel Picatinny Rail Browning BAR, Alu [..0003]1 x Recknagel Picatinny Rail Browning BAR, Steel [..0003]1 x Recknagel Picatinny Rail Browning X Bolt Long, 20 MOA, Alu1 x Recknagel Picatinny Rail Anschutz 1780, Alu [..002B]1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Recknagel Picatinny Rail Browning Maral, Steel [..002J]
Manufacturers
Useful Information