K-80 Stock Bolt & Weight Balance System

£130.00
20% VAT incl.

Available Options

  • Model:K80STOCKWEIG
K-80 Stock Weight System - Bolt & Weight/s

The stock screw system is installed in the stock bolt access hole under the recoil pad. Installation is simple and involves only removing the original stock bolt and replacing it with the new longer stock bolt.
Please Note: Some stocks may have been shortened along with the stock bolt. To ensure you don't fit the new bolt and risk damaging your gun, please check the length of your existing bolt. You should not be exceeding 8 turns of the stock bolt when fitting. More than 8, feel free to contact us regarding shortening the bolt length.

The length of the longer stock bolt is 292mm.
Length of stock bolt from thread to mid piece is 168mm. This replacement bolt is designed to fit in place of existing stock bolts of 160mm in length.
The washers provide a slight amount of spring tension when tightening up the stock bolt. Please note the washer arrangement in the photo and the Stock Weight Instruction Sheet.

The balance screw carries an adjustable weight that can be positioned anywhere on the top section of the balance screw. The longer stock bolt itself weights an additional 40g in weight to the standard bolt and each weight adds another 30g. A possible 5 weights can be added to the longer stock bolt, totalling 150g. This added to the additional 40g of the stock bolt means you can add up to 190g to the rear end of the gun.

Also available for the K-80 Balance System are the K-80 Barrel Weights, combining both systems provides maximum flexibility in handling configuration.

There are different Options for purchasing:
- Stock Weight Screw with ONE Stock Weight
- Stock Weight Screw with TWO Stock Weights
- Additional Individual Weights are available.

We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

2 x Krieghoff Navy Gun Slip1 x Krieghoff Comb Wrench (T-Handle)1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Schultz & Larsen Take Down Rifle Case1 x Krieghoff Spares Kit1 x Jones Gun Nut Kit2 x Krieghoff Trigger Screw1 x K-80 Barrel Weight Balance System1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Krieghoff 12b Choke Wrench1 x Recknagel SOB3D Silencer (Standard Thread)1 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint2 x Briley T Wrench for K-80 Parcours Briley Chokes1 x Krieghoff Ejector Ball and Spring2 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)3 x Krieghoff HIVIZ Pro Sights3 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x WalkStool Spare Leg Joints2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Krieghoff Extended Pillars for Adjustable Comb4 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x ERATAC Bubble Level [T0940-0002]1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Briley 20b Speed Wrench - For Krieghoff2 x Krieghoff Woven Fabric Patch2 x Walkstool Steady1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 04 [8332]2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Schmierfix Grease by Liqui Moly1 x Starkie Blue (A.K.A Smurf Poo)1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8034]1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 02 [8722]1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8336]1 x Ebony & Brass 20 Bore Snap Caps1 x Black Barrel Case (83cm Internal)1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x K-80 Standard Trigger - Black Titanium1 x K-80 Forward Position Trigger - Steel1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)2 x K-80 Standard Trigger - Gold Plated2 x Krieghoff "K" Mesh Cap - Black1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat C1 [8280]1 x Parker Hale Thread to 8-32 Thread Converter1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8335]1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x WalkStool Set of Spare Red Spring1 x Recknagel Adaptor for Thermal and Night Vision Devices - 30mm1 x Contessa Picatinny Rail - CZ 527 (0 MOA)1 x K-80 Forward Position Trigger - Titanium1 x Recknagel Sling Swivel Nut Screw (ø¸ 3.0mm) [20230-0022]1 x Recknagel Standard Banded Swivel Ring [22620-....]1 x WalkStool Comfort 65 (65cm/26in)2 x Gerber Metolius Pocket Folder1 x ERATAC M-Lok Picatinny Rail, 3 Slots [T5903-0008]1 x CR2032 Camelion Lithium Battery1 x Contessa QD Forward Extended Picatinny Rail Mount for Blaser2 x Krieghoff Stock Removal Wrench1 x ERATAC Offset UNI-Interface Picatinny Rail [T0913-0000]1 x ERATAC M-Lok for QD Sling Swivel [T5510-0000]1 x Recknagel SOB Silencer ERA LOC Thread Bushing1 x Bear Grylls Pocket Tool1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x Recknagel Grip Cap Compartment1 x K-80 Forward Position Trigger - Gold Plated
Manufacturers
Useful Information