Kick-Eez Trap (401)

£54.00
20% VAT incl.

Available Options

  • Model:KICKEEZ401
This pad has a concave face and was designed especially for "Fixed Position" trapshooting.

The Kick-Eez Pads are produced as Oversized and will need grinding to fit to your stock. Please contact us before ordering if you have any issue regarding the fitting. We do provide a fitting service, which would involve sending us your stock or booking an appointment to have the work done.
Our number is 01978 66 00 01.

Colour: Black
Measurements (All 401 Series Pad):
Width - 52mm / 2.04"
Length - 145mm / 5.7"
Hole Spacing - 80mm / 3 1/8"

Choice of Pad:
401-6 - 19mm (0.75") Thick / Weight: 158 g
401-8 - 23mm (0.94") Thick / Weight: 197 g
401-10 - 29.5mm (1.16") Thick / Weight: 235 g
(Note: Some sizes may be temporarily out of stock and not available)

Other Kick-Eez Pads Available:
- Kick-Eez 301 - All Purpose
- Kick-Eez 403 - Modified Trap
- Kick-Eez DA 301 - Dual Action All Purpose


Installation Instructions:

Step 1
Position the pad on the butt of your stock and determine whether or not you can use the existing screw holes. If the holes match, proceed to step 2. If the holes do not match on your wood stock, then do the following: position the pad on the butt of the stock and mark the new screw holes on the gun stock butt. If the new holes are going to interfere with the old holes, then you must plug the old holes of the gun stock butt. The best way to do this is to drill out the old holes with a 1/4" drill to a depth of one inch and then cut a 1/4" dowel rod 7/8" in length and drive it into the hole. Reposition the pad on the stock, mark the location of your new screw holes, drill a 1/8" hole to a depth of one inch and screw the pad to the stock.

Step 2
While the pad is still on the stock, scribe a line on the pad plate. Remove pad from stock and position pad on a grinding jig and sand to the line you have scribed on the plate. If you do not have a jig you can "free hand" sand the pad.

Step 3
After grinding to the proper fit, radius (round) the heel, toe and sides of the pad to remove any square corners. This will make the gun easier to mount to the shoulder, give it a more attractive appearance, and prolong its life.

Step 4
Screw pad on stock. For best results: A. Pads with 1/8 inch holes apply a lubricant like Vaseline to the face of the pad around the mounting holes. This will help prevent marring the pad during installation of the screws. Wipe the pad clean after installation.

Step 5
Placing recoil pads on synthetic stocks may require professional installation by your gunsmith




You might also like...

1 x Contessa Picatinny Rail - Sako 75/85 Medium (0 MOA) Adjustable1 x Recknagel Picatinny Rail Remington 700 L, Alu [..0112]1 x Recknagel Picatinny Rail Remington 700 S, Alu [..0012]1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA)1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (20 MOA)1 x Recknagel SECURA Sling Swivel - 20mm Wide - 6mm [22009-1000]1 x Recknagel Sling Swivel Screw (ø¸ 3mm) [20205-0022]1 x ERATAC Backup Front Sight for Picatinny, 1.8mm [T0542-0355]1 x Contessa Shiny Chromed Picatinny Rail - Howa Short (10 MOA)1 x Recknagel Fixed Standing Window Sight 10mm [15111-2010]2 x Krieghoff HIVIZ Pro Sights1 x Krieghoff Front Sight Bead (Standard)1 x K-80 Stock Weight for Balance System1 x Krieghoff Sight Bead Blanking Screw1 x Ebony & Brass 20 Bore Snap Caps1 x VFG Magnetic Felt Clamps for Vices - 125mm1 x Krieghoff C-Clips (E-Clips)1 x Recknagel Weaver/Picatinny Mounts for S&B Rail (QD Lever)1 x Krieghoff Spares Kit1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Contessa Shiny Chromed Picatinny Rail - Howa Long (20 MOA)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Med (20 MOA)1 x Recknagel Leaf Sight 19mm [15235-3019]1 x Krieghoff Woven Fabric Patch1 x Recknagel Ring Base for Rear Sight [16550-0185]1 x Contessa Shiny Chromed Picatinny Rail - Howa Long (10 MOA)1 x Contessa Shiny Chromed Picatinny Rail - Remington 700 Long (0 MO1 x Recknagel Grip Cap Skeleton Pointed [24060-0200]1 x Contessa Shiny Chromed Picatinny Rail - Howa Long (0 MOA)1 x Recknagel Steel Stock Trap Door1 x Recknagel 11mm Dovetail Mount for Aimpoint Micro [47620-0123]1 x Krieghoff Trigger & Selector Locking Wrench1 x Recknagel Zeiss Rail 45º Components - 6mm BH1 x K-80 Forward Position Trigger - Gold Titanium1 x Recknagel Weaver/Picatinny Mount for Aimpoint Micro [57020-1200]1 x Krieghoff Trap Special / Pro Rib Wheel Locking Wrench1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Recknagel 40mm Ring Components - 5mm BH1 x Recknagel 11mm Dovetail Ring Mounts 30mm [42230-0500]
Manufacturers
Useful Information