Recknagel Weaver/Picatinny Mounts for Zeiss Rail 45º (Tri-Nut)

£228.11
20% VAT incl.


  • Model:57945-0700
Recknagel Weaver/Picatinny Mounts for Zeiss Rail with 45º
45º Angle is familiar with the modern Zeiss (ZM), Docter (Z Rail), Meopta (MR Rail), Minox (IS Rail), Leica (Leica Rail) and Schmidt & Bender (LMZ) Rail Scopes.
with Tri-Nut Fastening

Also available in Quick Release Lever Version

Height of Base - 7mm
Contents Supplied - 2x Tip-Off Mounts and Wrench Key
Code Ref: 57945-0700

These Tip-off mounts are designed to be used with the Zeiss Rail Rifle Scopes with the 45º angle, especially the Zeiss Diarange. Fit to both Weaver and Picatinny Rails. The mounts give a low overall height with the height of the bases being only 7mm. The 2 Tip off blocks have a weaver/picatinny profile and are mounted onto the rail and tightened using the supplied wrench.

Fitting Tips:
- Remove the two 45º Mounting Blocks from the Recknagel Mounts
- Drop the 45º Mounting Blocks into the Zeiss Rail slot, with the wider part of the block in first.
- Align the holes of the base component of the Recknagel Mount with the 45º Mounting Blocks, then fit the screw going through the Recknagel Mount into the 45º Mounting Block.
- Tighten the screws up fully for both of the 45º Mounting Blocks. Then afterwards slacken them off by a 1/8 turn.
- You are now able to slide the mount into position to suit the picatinny rail or weaver bases.
- We would advise to position the mount on the rail or bases one at a time, tighten up the 45º Mounting Block screws on one of the bases first.
- Once this is secured, repeat for the second base. Carefully align the second base in position and lift it off the rail/weaver base in order to tighten up the 45º Mounting Blocks.

The Recknagel Catalogue has a wide range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Recknagel Catalogue is available to browse online.
1 x Schultz & Larsen Picatinny Rail for Victory (0 MOA)1 x Recknagel 11mm Dovetail to Picatinny Rail Adaptor [..1011]1 x Winchester 3" Folding Knife2 x Krieghoff Navy Gun Slip2 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)3 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)3 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Krieghoff Trigger Screw2 x Parker Hale Thread to 8-32 Thread Converter1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Recknagel 19mm Dovetail Ring Mounts 30mm1 x VFG Intensive Barrel Cleaning Felts for 10.3mm (Box of 30)3 x VFG Intensive Barrel Cleaning Felts for .44 (Box of 30)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Intensive Barrel Cleaning Felts for 16 Bore (Box of 25)2 x VFG Intensive Barrel Cleaning Felts for 6.5mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for 7mm (Box of 50)1 x Krieghoff Woven Fabric Patch2 x ERATAC UNI-Interface Picatinny Rail, 85mm [T0908-0013]1 x Krieghoff 12b Choke Wrench1 x D Cell x 2 Camelion Plus Alkaline Batteries1 x Krieghoff Comb Wrench (T-Handle)1 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 25)3 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Schultz & Larsen Scope Rings 30mm, X-High (20mm BH)1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Jones Thru-the-Pad Adjuster1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]2 x Contessa Picatinny Rail - Tikka M590/M595 (0 MOA)1 x Contessa Picatinny Rail - Sauer 90 (0 MOA)1 x Contessa Picatinny Rail - Baikal (0 MOA)1 x Contessa Picatinny Rail - Ruger American (0 MOA)1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x VFG 3 Piece Aluminium Cleaning Rod for 7mm and Over, + Adaptor1 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x Jones Gun Nut Kit2 x Jones Original Pad Adjuster1 x CR2032 Camelion Lithium Battery1 x Contessa Tikka T1 Euro Rail for Quick Release Mount1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Recknagel Detachable Sling Swivel 20mm Loop - 6mm Stud1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 02 [8717]1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8525]1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat C1 [8280]1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8005]1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8335]1 x Schmierfix Grease by Liqui Moly1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Recknagel SOB3D Silencer (Standard Thread)1 x Gerber GDC Zip Blade1 x Anschütz Biathlon Harness1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x Contessa CZ 527 Euro Rail for Quick Release Mount1 x Contessa Quick Release Picatinny Rail1 x Contessa Browning BAR Euro Rail for Quick Release Mount1 x Contessa Sauer 202 Standard Euro Rail Base for QR Mount1 x Contessa Lightweight Alloy Picatinny Mount for Docter Red Dot Sight1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]
Manufacturers
Useful Information