Recknagel Weaver/Picatinny Mounts for Zeiss 45º (QD Lever)

£228.11
20% VAT incl.


  • Model:57545-0700
Recknagel Weaver/Picatinny Mounts for Zeiss 45º
45º Angle is familiar with the modern Zeiss (ZM), Docter (Z Rail), Meopta (MR Rail), Minox (IS Rail), Leica (Leica Rail) and Schmidt & Bender (LMZ) Rail Scopes.
with QD Polyform Levers

Also available in Tri-Nut Version

Height of Base - 7mm
Contents Supplied - 2x Tip-Off Mounts, 1x Wrench
Code Ref: 57545-0700

These Tip-off mounts are designed to be used with the Zeiss Rifle Scopes, especially the Zeiss Diarange and all scopes with 45º angle. The mounts give a low overall height with the height of the bases being only 7mm. The 2 Tip off blocks have a weaver/picatinny profile and are mounted onto the rail and tightened using Quick Detachable Polyform Levers.

Fitting Tips:
- Remove the two 45º Mounting Blocks from the Recknagel Mounts
- Drop the 45º Mounting Blocks into the Zeiss Rail slot, with the wider part of the block in first.
- Align the holes of the base component of the Recknagel Mount with the 45º Mounting Blocks, then fit the screw going through the Recknagel Mount into the 45º Mounting Block.
- Tighten the screws up fully for both of the 45º Mounting Blocks. Then afterwards slacken them off by a 1/8 turn.
- You are now able to slide the mount into position to suit the picatinny rail or weaver bases.
- We would advise to position the mount on the rail or bases one at a time, tighten up the 45º Mounting Block screws on one of the bases first.
- Once this is secured, repeat for the second base. Carefully align the second base in position and lift it off the rail/weaver base in order to tighten up the 45º Mounting Blocks.

The Recknagel Catalogue has a wide range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Recknagel Catalogue is available to browse online.
1 x VFG Barrel Cleaning Felts for 10.3mm (Box of 30)2 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor1 x VFG Barrel Cleaning Felts for 9mm (Box of 500)1 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x Schmierfix Grease by Liqui Moly2 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x VFG Intensive Barrel Cleaning Felts for 7mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x VFG Intensive Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Contessa Lightweight Alloy Picatinny Mount for Docter Red Dot Sight1 x Gerber Metolius Pocket Folder1 x ERATAC 56mm Ring with UNI-Interface [03680-5757]1 x ERATAC 30mm Ring with UNI-Interface [03680-5730]1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x VFG Intensive Barrel Cleaning Felts for .44 (Box of 30)1 x VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)2 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Recknagel Replacement Polyform Lever [00088-5700]1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x VFG Brass Adaptor for VFG Rod 4-4.5mm (Spare)1 x Winchester 3" Folding Knife2 x VFG Adaptor for VFG Rods (Spare)1 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 100)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x Parker Hale Thread to 8-32 Thread Converter1 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 25)1 x VFG Intensive Barrel Cleaning Felts for .375 (Box of 40)2 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x VFG Intensive Barrel Cleaning Felts for 10.3mm (Box of 30)1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Jones Gun Nut Kit1 x VFG 3 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor2 x Jones Thru-the-Pad Adjuster1 x VFG Magnetic Felt Clamps for Vices - 150mm1 x Black Barrel Case (83cm Internal)1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x Contessa 30mm Rings for Simple Black - 5.0mm (Med)1 x Contessa 30mm Rings for Simple Black - 10.0mm (X-High)1 x Contessa 25.4mm Rings for Simple Black - 2.5mm (Low)1 x Contessa 34mm Rings for Simple Black - 6.5mm (Medium)1 x Recknagel One Piece Tip-off Mounts for Swarovski [57553-0110]1 x Recknagel Weaver/Picatinny Mounts for S&B Rail (QD Lever)1 x Recknagel 11mm Dovetail Mount for Aimpoint Micro [47620-0123]1 x Recknagel One Piece Tip-off Picatinny Ring Mount [57030-5110]1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (Tri-Nut)1 x Recknagel SOB Silencer ERA LOC Muzzle Adaptor Wrench1 x Recknagel 34mm Ring Components - 5mm BH1 x Recknagel Mount for Docter & Zeiss Compact [57070-0000]
Manufacturers
Useful Information