Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount

£71.56
20% VAT incl.


  • Model:BA31
Contessa Schultz & Larsen - Victory, Classic, Hunter & Ambassador
Euro Rail Base for use with Quick Release Mounts


Length: - 165mm
Weight: - 82g
Height - 5mm BH
Code: BA31
Material:
Blued Steel

Fitting: When fitting, we would always recommend using a thread locker adhesive on the screws. Fit the screws on the rear base first but do not tighten fully, then fit the front screws next but do not fully tighten. Gradually tighten one screw at a time in small increments until all screws are fully tightened and flush. This will ensure a good solid fit to the rifle.

Note: The two rear holes on this rail match up for the Victory, Classic, Hunter and Ambassador 21.8mm. But the second to third holes on the Victory & Ambassador are 2mm further apart than the holes on the Classic and Hunter. This means, the rail has incorporated elongated holes for the front base. This is to allow both of the model variations to fit. This has no loss of accuracy and due to the countersink and design of the hole, it will align perfectly centrally to the action.

For use with Contessa Part:
Quick Release Base (Bolt Action) Code Ref: SB02

This Quick Release Base is precision made by Contessa Alessandro & C. s.n.c. The fixed base is made to fit directly to your rifle, then you use the Contessa Quick Release Base, either one of the possible models available, and using it's QD clamping system you can attach the mount to the base. This system allows you to interchange scopes on a single rifle, and even change a scope to different rifles in seconds using the Contessa system.

The Contessa Euro Rail System -
Find Out More and How it Works

To see the available Quick Release Mounts - Click Here

Contents Supplied:
- 1 x Euro Rail Base for Schultz & Larsen,
- Screws
- Wrench

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.

Fitting and Features Video

1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)3 x VFG Barrel Cleaning Felts for .44 (Box of 250)3 x Krieghoff HIVIZ Pro Sights1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)3 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint2 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)2 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)2 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Krieghoff Navy Gun Slip1 x Recknagel Replacement Polyform Lever [00088-5700]1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Schultz & Larsen Professional Bipod by Spartan1 x Krieghoff Pro Choke Box1 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor1 x Schmierfix Grease by Liqui Moly1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 25)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x Krieghoff Trigger Screw2 x Krieghoff Spares Kit2 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x VFG Barrel Cleaning Felts for 9mm (Box of 40)1 x VFG Pull Through Pocket Set for .22 Upwards1 x VFG Complete Set for .1771 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Anschütz Biathlon Harness2 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Recknagel Picatinny Rail Sako Short, Alu [..0014]1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Recknagel Picatinny Rail Sako Long, Alu [..0114]1 x Contessa Picatinny Rail - CZ 452 / 455 (0 MOA)2 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor1 x K-80 Barrel Weight Balance System1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x VFG Barrel Cleaning Felts for .44 (Box of 30)1 x Recknagel Picatinny Bases - Schultz & Larsen1 x VFG Barrel Cleaning Felts for .45 (Box of 30)1 x Schultz & Larsen Spare Screws for Picatinny Rails1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)1 x VFG Barrel Cleaning Felts for .22 (Box of 80)2 x Krieghoff K-Diamond Beanie - Navy1 x K-80 Stock Weight for Balance System1 x VFG 1 Piece Steel Short Cleaning Rod with 4-4.5mm (.177) Adaptor1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x VFG Magnetic Felt Clamps for Vices - 150mm1 x VFG Barrel Cleaning Felts for .375 (Box of 40)1 x VFG Brass Adaptor for VFG Rod 4-4.5mm (Spare)1 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Krieghoff 12b Choke Wrench2 x Krieghoff Factory Hanger Pin1 x Recknagel Super Express 2 Leaf Sight [15400-3036]2 x AG3 / 392A Alkaline Batteries (10 Pack)1 x Contessa CZ 527 Euro Rail for Quick Release Mount1 x Ebony & Brass 20 Bore Snap Caps1 x Contessa Lightweight Alu Picatinny Rings - 36mm (8mm BH)1 x Bauer - One Piece Railmount 25.4mm (11mm High)1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 04 [8332]1 x Bauer Outdoor 10x25 Binoculars1 x Krieghoff K-Diamond Beanie - Burgundy1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)2 x Bauer HD Series 8x25 Binoculars1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Clearance Americase Cordura Case Cover (34.5x12x5")1 x Contessa Satin Chromed Picatinny Rail - Howa Short (20 MOA)1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Krieghoff Stock Removal Wrench3 x AimZonic Compact Camo Sound Moderator1 x Contessa Picatinny Rail - Bergara B14 Long (20 MOA)1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8005]1 x K-80 Forward Position Trigger - Titanium1 x Krieghoff Sight Bead Blanking Screw1 x Ex-Demo Contessa One Piece QD Picatinny Mount Body1 x Clearance Americase Cordura Case Cover (32x11x3")1 x Recknagel Spare Ring Cap Screw M3.5 x 7.4mm [..0880]1 x Contessa Satin Chromed Picatinny Rail - Howa Short (0 MOA)1 x Clearance Krieghoff Classic Rifle Americase (No Cover)2 x AA x 4 Camelion Plus Alkaline Batteries1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Recknagel Sling Swivel Nut Screw (ø¸ 3.0mm) [20230-0022]1 x Bauer ED 8x32 Binoculars1 x Krieghoff 2013 Badge (Collectors Badge)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Krieghoff Achievement Badge 200 Straight (Blue)1 x Contessa Picatinny Rail - Tikka T1 / T1X (10 MOA)1 x Krieghoff Front Sight Bead (Small)1 x Recknagel SOB3D Silencer (ERA LOC)1 x AAA x 4 Camelion Plus Alkaline Batteries1 x Schultz & Larsen Scope Rings 30mm, X-High (20mm BH)1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8525]2 x Bauer ED 8x50 Binoculars1 x Krieghoff Achievement Badge 25 Straight1 x Contessa Picatinny Rail - Tikka M55 (0 MOA)1 x Contessa Picatinny Rail - Sauer 202 (0 MOA) Extended1 x AimZonic Plus Camo Sound Moderator1 x Contessa QD Mount for HIK-Micro Panther (Picatinny)1 x Badge - Cob Bronze1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8244]
Manufacturers
Useful Information