VFG Barrel Cleaning Felts for 6.5mm (Box of 500)

£32.42
20% VAT incl.


  • Model:331953
VFG Barrel Cleaning Felts for 6.5mm
Code: (66824) 331953


These small felt screw-on pellets, which are calibre specific are used with the VFG Cleaning Rod to clean your barrel. The felts screw onto the cleaning rod tip and then passed down the barrel to give a smooth and effective clean.

The 6.5 mm felts are recommended for the following calibres: .264 Win. Mag., 25-06, .257 Roberts, 6.5 Creedmoor, 6.5x55 and All 6.5mm Calibres

See which Felts suit your Calibre >>>

Supplied as a bag containing: 500 felt screw-on pellets

Instructions for Use:
1. Take Adapter and screw this onto VFG Cleaning rod No. 66889 (900 mm Long).
2. Screw a VFG felt cleaner onto the coarse thread of the adapter.
3. Place a second VFG felt cleaner onto the metric thread (used together a screw for the cleaning of shotguns)
4. Push the adapter with the two felts carefully through the barrel from the breech end and out of the muzzle. The special felts compress into the rifling and follow it exactly. The forward pellet removes the fouling out of the muzzle and by pulling back the rod, the dirty pellet drops off the metric thread, leaving the screwed pellet to polish the barrel by pushing the rod backwards and forwards.
5. If the barrel is to be oiled, screw VFG Rifle Cleaner onto the adapter, soak this thoroughly with weapon oil (Ballistol or Ustanol) and repeatedly move it back and forth in the barrel.
6. To remove the oil repeat steps 1 - 4.
7. In order to remove rubbed off metal, please use Super Intensive Cleaners.

Make sure that the barrel of your weapon is free after each cleaning operation.

See the VFG Barrel Cleaning Catalogue >>>

Also Available:
Small Box Quantities (Standard) Small Box Quantities (Intensive) Large Pack Quantities
4 - 4.5mm Standard Felts (100) 4 - 4.5mm Intensive Felts (100) 4 - 4.5mm Standard Felts (500)
.22 Standard Felts (80) .22 Intensive Felts (80) .22 Standard Felts (500)
6mm Standard Felts (50) 6mm Intensive Felts (50) 6mm Standard Felts (500)
6.5mm Standard Felts (50) 6.5mm Intensive Felts (50) 6.5mm Standard Felts (500)
7mm Standard Felts (50) 7mm Intensive Felts (50) 7mm Standard Felts (500)
7.5mm Standard Felts (50) 7.5mm Intensive Felts (50) 7.5mm Standard Felts (500)
8mm Standard Felts (50) 8mm Intensive Felts (50) 8mm Standard Felts (500)
9mm Standard Felts (40) 9mm Intensive Felts (40) 9mm Standard Felts (500)
9.3mm Standard Felts (40) 9.3mm Intensive Felts (40) 9.3mm Standard Felts (500)
.375 Standard Felts (40) .375 Intensive Felts (40) .375 Standard Felts (500)
10.3mm Standard Felts (30) 10.3mm Intensive Felts (30) N/A
.44 Standard Felts (30) .44 Intensive Felts (30) .44 Standard Felts (250)
.45 Standard Felts (30) .45 Intensive Felts (30) N/A


Features & Cleaning Instructions Video

1 x ERATAC Offset UNI-Interface to UNI-Interface [T0960-0005]1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x ERATAC KeyMod Picatinny Rail, 3 Slots [T4903-0010]2 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x ERATAC KeyMod Picatinny Rail. 5 Slots [T4905-0010]2 x ERATAC UNI-Interface Picatinny Rail, 56mm [T0905-0008]1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)2 x ERATAC Offset UNI-Interface for Docter Sight [T0930-0000]3 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]3 x ERATAC Bubble Level [T0940-0002]1 x ERATAC UNI-Interface Docter Sight Adaptor [T0920-0005]1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x Bauer HD Series 8x25 Binoculars1 x ERATAC Ultra Lightweight One Piece Ring Mount2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x WalkStool Comfort 65 (65cm/26in)1 x ERATAC Offset UNI-Interface Picatinny Rail [T0913-0000]1 x ERATAC 25.4mm Ring with UNI-Interface [03680-5726]1 x ERATAC Offset Picatinny to UNI-Interface Adaptor [T0530-0000]1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x ERATAC KeyMod Adaptor for Harris Bipod Adaptor [T4390-0007]1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x Recknagel Adaptor for Thermal and Night Vision Devices - 62mm1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Krieghoff Sight Bead Blanking Screw1 x Krieghoff Ejector Ball and Spring1 x VFG Pull Through Pocket Set for .22 Upwards2 x Jones Original Pad Adjuster1 x Krieghoff "K" Logo Cap Navy & White1 x Silva Map Measurer (Mechanical)1 x ERATAC 30mm Ring with UNI-Interface [03680-5730]1 x Contessa Picatinny Rail - CZ 452 / 455 (0 MOA)1 x ERATAC 56mm Ring with UNI-Interface [03680-5757]1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x Contessa Satin Chromed Picatinny Rail - Howa Short (0 MOA)1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)1 x Krieghoff Spares Kit2 x Jones Thru-the-Pad Adjuster1 x Recknagel Folding Front Sight Bead Ivory [11240-3565]1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount1 x Contessa Picatinny Rail - Sako A7 Short (20 MOA)1 x Contessa 30mm Rings for Simple Black - 10.0mm (X-High)1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x ERATAC Picatinny to Harris Bipod Adaptor, Sliding Block (Nut)1 x Black Leather Shell/Cartridge Pouch1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Contessa 25.4mm Rings for Simple Black - 2.5mm (Low)1 x Black Barrel Case (83cm Internal)1 x Contessa Tikka T1 Euro Rail for Quick Release Mount1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable2 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x VFG Barrel Cleaning Felts for 9.3mm (Box of 40)1 x Gerber Metolius Pocket Folder2 x Krieghoff "K" Collectors Badge1 x Schmierfix Grease by Liqui Moly2 x Parker Hale Thread to 8-32 Thread Converter1 x Hi Viz - How to Become a Better Shooter1 x Contessa Shotgun Rib Mount for Red Dot Sights (Leica/Docter/Burris)1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop - 6mm Stud1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for 7mm (Box of 50)1 x ERATAC ACI Bubble Level [T0940-0000]2 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x VFG Intensive Barrel Cleaning Felts for 8mm (Box of 50)1 x Recknagel Picatinny Rail Marlin 1895 / 336, Alu [..001S]1 x Recknagel Picatinny Rail Heym SR21, Alu [..0022]1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Contessa Picatinny Rail - Sauer 90 (0 MOA)1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Contessa Picatinny Rail - Ruger American (0 MOA)1 x ERATAC UNI-Interface Picatinny Rail, 85mm [T0908-0013]1 x ERATAC Picatinny Extended Riser Mount (Nut)1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Recknagel SOB3D Silencer (Standard Thread)1 x VFG Wipe Length Stopper & Guide - Shotgun1 x Recknagel SOB3D Silencer (ERA LOC)1 x Recknagel Detachable Sling Swivel 20mm Loop - 6mm Stud1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x Recknagel Picatinny Rail Steyr-Mannlicher M, 0 MOA, Alu [..0288]1 x Contessa Blued Steel Picatinny Rings - 1" (8mm BH)1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x Contessa Spare Ring-to-Base Screws1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Contessa Picatinny Rail - Anschutz 54 Only (10 MOA)1 x Recknagel Weaver/Picatinny Mount for Aimpoint Micro [57020-1200]1 x Krieghoff 2011 Badge (Collectors Badge)1 x Recknagel Picatinny Rail Steyr-Mannlicher (Old) M, Alu [..0051]1 x Krieghoff 2012 Badge (Collector's Badge)1 x Recknagel Weaver Bases - Mauser M12 [..-302L]1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)1 x VFG Barrel Cleaning Felts for 9mm (Box of 500)1 x Contessa 30mm Rings for Simple Black - 5.0mm (Med)1 x Contessa Picatinny Rail - Merkel Helix (0 MOA)1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser1 x Ex-Demo Briley Choke Tube, K-80 Parcours - FULL (01)1 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Short (20 MOA) Adjustable1 x Recknagel Picatinny Rail CZ 550 Standard, Extended, Alu [..1962]1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Short (0 MOA) Adjustable1 x Recknagel Picatinny Rail CZ 550 Magnum, Alu [..0064]1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (QD Lever)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Krieghoff 2015 Badge (Collectors Badge)1 x Krieghoff 2018 DTL Badge (Collectors Badge)
Manufacturers
Useful Information