Recknagel Weaver/Picatinny Mounts for Zeiss 45º (QD Lever)

£228.11
20% VAT incl.


  • Model:57545-0700
Recknagel Weaver/Picatinny Mounts for Zeiss 45º
45º Angle is familiar with the modern Zeiss (ZM), Docter (Z Rail), Meopta (MR Rail), Minox (IS Rail), Leica (Leica Rail) and Schmidt & Bender (LMZ) Rail Scopes.
with QD Polyform Levers

Also available in Tri-Nut Version

Height of Base - 7mm
Contents Supplied - 2x Tip-Off Mounts, 1x Wrench
Code Ref: 57545-0700

These Tip-off mounts are designed to be used with the Zeiss Rifle Scopes, especially the Zeiss Diarange and all scopes with 45º angle. The mounts give a low overall height with the height of the bases being only 7mm. The 2 Tip off blocks have a weaver/picatinny profile and are mounted onto the rail and tightened using Quick Detachable Polyform Levers.

Fitting Tips:
- Remove the two 45º Mounting Blocks from the Recknagel Mounts
- Drop the 45º Mounting Blocks into the Zeiss Rail slot, with the wider part of the block in first.
- Align the holes of the base component of the Recknagel Mount with the 45º Mounting Blocks, then fit the screw going through the Recknagel Mount into the 45º Mounting Block.
- Tighten the screws up fully for both of the 45º Mounting Blocks. Then afterwards slacken them off by a 1/8 turn.
- You are now able to slide the mount into position to suit the picatinny rail or weaver bases.
- We would advise to position the mount on the rail or bases one at a time, tighten up the 45º Mounting Block screws on one of the bases first.
- Once this is secured, repeat for the second base. Carefully align the second base in position and lift it off the rail/weaver base in order to tighten up the 45º Mounting Blocks.

The Recknagel Catalogue has a wide range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Recknagel Catalogue is available to browse online.
1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)2 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)3 x Parker Hale Thread to 8-32 Thread Converter1 x Krieghoff Spares Kit1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)2 x VFG Pull Through Pocket Set for .22 Upwards1 x VFG Barrel Cleaning Felts for 9mm (Box of 500)1 x Recknagel Standard Banded Swivel Ring [22620-....]1 x K-80 Barrel Weight Balance System1 x Silva Map Measurer (Mechanical)1 x Krieghoff 28b Choke Wrench1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Schultz & Larsen Professional Bipod by Spartan1 x Recknagel Replacement Polyform Lever [00088-5700]1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Bauer HD Series 8x25 Binoculars1 x Krieghoff "K" Mesh Cap - Black1 x Gerber Metolius Pocket Folder1 x ERATAC ACI Elevation Turret [T0941-0000]1 x Bauer ED 8x42 Binoculars1 x Krieghoff Comb Wrench (T-Handle)1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x Jones Thru-the-Pad Adjuster1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x VFG Pull Through Match Pocket Set, for 4-4.5mm1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x Contessa Picatinny Rail - Tikka M55 (0 MOA)1 x Schultz & Larsen Torx Key for Scope Mounts1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x Used Sako P94S, Wooden Stock (.22 LR)1 x LED Lenser Intelligent Filter Set with Holster1 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor1 x Bauer - Aluminium 11mm Dovetail 30mm Rings (14mm High)1 x LED Lenser Car Charger1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)1 x HJB 6-24x50 Rifle Scope (Mil-Dot)1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x ERATAC UNI-Interface Picatinny Rail, 56mm [T0905-0008]1 x ERATAC ACI Bubble Level [T0940-0000]1 x Jones Original Pad Adjuster1 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail1 x Black Leather Shell/Cartridge Pouch1 x Contessa Picatinny Rail - CZ 527 (0 MOA)1 x VFG Barrel Cleaning Felts for .375 (Box of 40)
Manufacturers
Useful Information