Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount

£71.56
20% VAT incl.


  • Model:BA31
Contessa Schultz & Larsen - Victory, Classic, Hunter & Ambassador
Euro Rail Base for use with Quick Release Mounts


Length: - 165mm
Weight: - 82g
Height - 5mm BH
Code: BA31
Material:
Blued Steel

Fitting: When fitting, we would always recommend using a thread locker adhesive on the screws. Fit the screws on the rear base first but do not tighten fully, then fit the front screws next but do not fully tighten. Gradually tighten one screw at a time in small increments until all screws are fully tightened and flush. This will ensure a good solid fit to the rifle.

Note: The two rear holes on this rail match up for the Victory, Classic, Hunter and Ambassador 21.8mm. But the second to third holes on the Victory & Ambassador are 2mm further apart than the holes on the Classic and Hunter. This means, the rail has incorporated elongated holes for the front base. This is to allow both of the model variations to fit. This has no loss of accuracy and due to the countersink and design of the hole, it will align perfectly centrally to the action.

For use with Contessa Part:
Quick Release Base (Bolt Action) Code Ref: SB02

This Quick Release Base is precision made by Contessa Alessandro & C. s.n.c. The fixed base is made to fit directly to your rifle, then you use the Contessa Quick Release Base, either one of the possible models available, and using it's QD clamping system you can attach the mount to the base. This system allows you to interchange scopes on a single rifle, and even change a scope to different rifles in seconds using the Contessa system.

The Contessa Euro Rail System -
Find Out More and How it Works

To see the available Quick Release Mounts - Click Here

Contents Supplied:
- 1 x Euro Rail Base for Schultz & Larsen,
- Screws
- Wrench

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.

Fitting and Features Video

1 x Schultz & Larsen Take Down Rifle Case1 x Schultz & Larsen T-Handle Wrench (4mm Hex)4 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Krieghoff Trigger Screw2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount2 x Krieghoff HIVIZ Pro Sights1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm2 x ERATAC Bubble Level [T0940-0002]2 x Parker Hale Thread to 8-32 Thread Converter2 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud2 x Krieghoff K80 Speed Wrench for Factory Chokes2 x WalkStool Comfort 65 (65cm/26in)1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable2 x Schmierfix Grease by Liqui Moly1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]3 x Black Barrel Case (83cm Internal)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x HJB 6-24x50 Rifle Scope (Mil-Dot)1 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Krieghoff Front Sight Bead (Standard)1 x Krieghoff Front Sight Bead (Small)1 x Recknagel SECURA Sling Swivel - 25.4mm Wide - 6mm [22009-3000]1 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x Recknagel Picatinny Rail Antonio Zoli 1900, Alu [..0089]1 x Bauer ED 8x42 Binoculars1 x Black Leather Shell/Cartridge Pouch1 x Schultz & Larsen Scope Rings 30mm, X-High (20mm BH)1 x Recknagel Detachable Magnum Sling Swivel 25.4mm Loop - 8mm Stud1 x VFG Wipe Length Stopper & Guide - Shotgun1 x Recknagel SECURA Sling Swivel - 25.4mm Wide - 8mm [22011-3000]1 x Krieghoff Pro Choke Box1 x Recknagel Detachable Sling Swivel 20mm Loop - 8mm Stud1 x Krieghoff Comb Wrench (T-Handle)1 x VFG Adaptor for Parker Hale English Rods (over 7mm)1 x Contessa Picatinny Rail - CZ 452 / 455 (0 MOA)1 x Recknagel Weaver Bases - Chapuis Express [57080-3029]1 x Contessa Picatinny Rail - Anschutz 54/64 (30 MOA)1 x Recknagel Weaver Bases - Mauser M12 [..-302L]1 x Recknagel Picatinny Rail Mauser 98, Alu [..0010]1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Krieghoff Spares Kit1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x Recknagel Picatinny Rail Bergara B14 Short, Alu [..0012]2 x Recknagel SECURA Sling Swivel - 20mm Wide - 8mm [22011-1000]1 x Recknagel SECURA Sling Swivel Magnum 25.4mm [22011-9500]1 x Contessa Picatinny Rail - Bergara B14 Short (20 MOA)1 x VFG Intensive Barrel Cleaning Felts for 9.3mm (Box of 40)1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Schultz & Larsen T-Handle Wrench (Torx 20)1 x VFG Complete Set for .1771 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount1 x Contessa Lightweight Alu Picatinny Rings - 36mm (8mm BH)1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x Walkstool Steady
Manufacturers
Useful Information