Contessa Picatinny Rail - Sako 75/85 Long (20 MOA) Adjustable

£136.61
20% VAT incl.


  • Model:PH14N/20
Contessa Picatinny Rail for Sako 75 / 85 Long
With 20 MOA
Adjustable to fit various model variations
Primarily fits Sako Models: 75 / 85 but can also fit older models using the Sako tapered dovetail system too.
Fits Calibres: .300 Win Mag / .338 Win Mag / .375 H&H Mag / 7mm Rem Mag
Also the XL, Extra Long 85 Models: .338 Lap Mag, .416 Rigby, .450 Rigby, .500 Jeffrey
(Please always double check the action size as this is a guide)

Rail Length: - 170mm
Distance between Bases: - 87mm - 110mm
Height (BH) - 12.5mm
Material: - Steel
Code Ref: PH14N/20

Contents Supplied:
- 1x Steel Rail,
- 1x Rear Base,
- 1x Front Base,
- 3x Wrench,
- Fitting Screws all included

Distance Spacing: (distances between bases)
30mm (Dovetail Base) / 87 - 110mm / 31mm (Dovetail Base)

This Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The mount is precision made to fit the Sako Tapered Dovetail System. Supplied as components, the separate bases are mounted to the rifle and locked in place with vertical locking screws (we do suggest giving the bases a firm tap with a plastic hammer to make sure they're fitted on fully).
Then the picatinny rail is attached to the bases using the screws provided. As the picatinny rail is adjustable in length, provided the bases on your Sako are between 87mm and 110mm apart, the rail will be able to fit.

Fitting:
The independent front and rear bases slide onto the Sako dovetails, then are tightened to the action using locking screws from the top of the base. Once the bases are fitted, the length of picatinny fits over the top of them and is screwed on to the bases to secure them in place. Using thread locker adhesive to ensure the screws don't loosen under recoil can be used if required.

Fitting Guide Video



Potential Fitting Issue:
A common issue with the Sako rifles is that the taper on the rifle is not the same as the taper on the picatinny rail. Contessa have designed their rail to fit as accurately as possible, tested on a wide number of Sako 85 actions. We have discovered there are slight variations in the Sako rifle dovetails due to factory tolerances, so even just a 1/100th of a mm can mean a poor fit. A method we use to overcome this poor fit is to hand fit the bases onto the rifle using a file. You may discover that the bases do not slide on fully flush with the back of the bases on the rifle, especially on older models of Sako which predate the Sako 85. If you need any advice on hand fitting please contact us.

Other Models Available:
Sako 75/85 X-Short (0 MOA)
Sako 75/85 X-Short Adjustable (0 MOA)
Sako 75/85 X-Short Extended (0 MOA)
Sako 75/85 X-Short Extended / Adjustable (0 MOA)
Sako 75/85 Short Adjustable (0 MOA)
Sako 75/85 Short Extended (0 MOA)
Sako 75/85 Short Extended / Adjustable (0 MOA)
Sako 75/85 Medium (0 MOA)
Sako 75/85 Medium Adjustable (0 MOA)
Sako 75/85 Medium Extended (0 MOA)
Sako 75/85 Long (0 MOA)
Sako 75/85 Long Adjustable (0 MOA)


The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.



You might also like...

1 x Krieghoff Front Sight Bead (Standard)1 x Krieghoff Spares Kit1 x Jones Gun Nut Kit1 x Recknagel Grip Cap Skeleton Pointed [24060-0200]1 x Recknagel Stock Shield - 2 Point Shield Contoured1 x Recknagel Adaptor for Thermal and Night Vision Devices - 30mm1 x Recknagel Grip Cap Compartment1 x ERATAC 56mm Ring with UNI-Interface [03680-5757]1 x Krieghoff Sight Bead Blanking Screw1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)2 x Recknagel 16mm Dovetail Ring Mounts 30mm1 x Recknagel Grip Cap Flat with Large Edge [24020-0200]1 x Recknagel One Piece QD Tip-off Picatinny Ring Mount [57530-5110]1 x Recknagel Grip Cap Domed Blank [24000-0400]1 x Recknagel Stock Shield - 2 Point Shield Flat1 x Recknagel SECURA Safety for Remington 700 [30170-1200]1 x Recknagel Grip Cap Full Domed [24000-0100]1 x Recknagel Grip Cap Skeleton Rounded [24060-0100]1 x Recknagel Picatinny QD Rings 30mm [57530-0500]3 x Recknagel Mount for Docter & Zeiss Compact [57070-0000]1 x Recknagel 40mm Ring Components - 5mm BH1 x Recknagel 25.4mm/1 inch Ring Components - 5mm BH1 x Recknagel 34mm Ring Components - 5mm BH2 x Ex-Demo Briley Choke Tube, K-80 Parcours - FULL (01)1 x Ex-Demo Contessa One Piece QD Picatinny Mount Body1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Recknagel Picatinny Rail Winchester XPR Short, Alu [002V]1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 02 [8722]3 x EX Demo - Gerber Steady Tool (Phone Tripod)2 x Gerber Basic Fixed Blade Serrated1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Short (20 MOA) Adjustable1 x Gerber Myth Series Fixed Saw1 x Ex-Demo K-80 Steel 12b Hanger #51 x EX Demo - Gerber Metolius Pocket Folder1 x Ex-Display Gerber GDC Zip Hex1 x Gerber New Myth Series Fixed Blade Pro (Gut Hook)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)2 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor1 x Recknagel Picatinny Rail Remington 700 L, Alu [..0112]2 x Gerber Paraframe II Fine Edge Knife1 x Contessa Picatinny Rail - Browning X Bolt Long (0 MOA) Extended1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (Tri-Nut)2 x VFG Adaptor for VFG Rods (Spare)1 x Contessa Picatinny Rail - Winchester 70 Short (20 MOA)1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)2 x Contessa Picatinny Rail - Winchester 70 Short (0 MOA)2 x Recknagel Picatinny Rail H&K SLB 2000, Alu [..0008]1 x Recknagel Weaver Bases - Browning European [..-3056]1 x Contessa Picatinny Rail - CZ 452 / 455 (0 MOA)1 x Recknagel Weaver Bases - Browning Eurobolt [..-3078]1 x Contessa Picatinny Rail - CZ 527 (20 MOA)1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Recknagel Weaver Bases - H&K SLB 2000 [..-3008]1 x Recknagel Weaver Bases - Browning X-Bolt [57080-301P]1 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail1 x Contessa Picatinny Rail - Tikka T3 / T3X (0 MOA) Extended1 x Recknagel Weaver Bases - Browning A-Bolt I/II [57080-3020]3 x Contessa Picatinny Rail - BRNO 98 (0 MOA)1 x Recknagel Weaver Bases - FFV Carl Gustaf 4000 [.-3042]1 x Contessa Picatinny Rail - Winchester 70 WSM (20 MOA)1 x Contessa Picatinny Rail - CZ 452 / 455 (30 MOA)1 x Contessa Picatinny Rail - Tikka T3 / T3X (30 MOA)2 x Contessa Picatinny Rail - CZ 550 Magnum (0 MOA)1 x Contessa Picatinny Rail - CZ 550 Magnum (20 MOA)1 x Contessa Picatinny Rail - Tikka T3 / T3X (0 MOA)2 x Contessa Picatinny Rail - Winchester 70 Short (10 MOA)2 x Contessa Picatinny Rail - CZ 550 Standard (20 MOA)2 x Contessa QD Mount for Blaser for ATN X-Sight II1 x Recknagel Weaver Bases - Browning T-Bolt [57080-301Q]1 x Contessa QD Forward Extended Picatinny Rail Mount for Blaser1 x Recknagel Weaver Bases - Browning Mauser [..-3057]1 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x Recknagel Weaver Bases - Heym SR 20 [57080-3060]1 x Recknagel Weaver Bases - Browning A-Bolt III [57080-302T]1 x Contessa Picatinny Rail - Tikka T1 / T1X (20 MOA)1 x Contessa Picatinny Rail - CZ 550 Standard (0 MOA)1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser1 x Contessa Picatinny Rail - Winchester 70 Long (20 MOA)1 x Recknagel Weaver Bases - Browning BAR/BLR [57080-3003]2 x Recknagel Picatinny Rail CZ 550 Standard, Extended, Alu [..1962]1 x Recknagel Weaver Bases - Haenel Jager 10 [..-302C]1 x VFG Intensive Barrel Cleaning Felts for .45 (Box of 30)2 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Gerber GDC Zip Blade1 x Contessa Picatinny Rail - Sako 75/85 Medium (0 MOA) Adjustable1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 02 [8717]2 x VFG Adaptor for Parker Hale English Rods (over 7mm)2 x Black Barrel Case (83cm Internal)1 x Ex-Demo Krieghoff K-20 1-Barrel Americase (No Cover)1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (10 MOA)1 x Jones Original Pad Adjuster1 x Contessa Tactical One Piece QD Picatinny Ring Mount 30mm, 0 MOA1 x Contessa Tactical One Piece QD Picatinny Ring Mount - 40mm1 x Contessa Tactical One Piece QD Picatinny Ring Mount 40mm, 0 MOA1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8005]1 x Krieghoff K-80 Badge "K-80 Sport" Logo2 x Winchester 3" Folding Knife2 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA)2 x Gerber Powerframe Knife2 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 04 [8332]1 x Contessa Picatinny Rail - Bergara B13 (0 MOA)1 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Ex-Demo K-80 Steel 12b Hanger #61 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)1 x Recknagel 11mm Dovetail Ring Mounts 30mm [42230-0500]1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (20 MOA)1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8335]1 x Contessa Picatinny Rail - Anschutz 54/64 (10 MOA)1 x Recknagel Picatinny Rail Mauser M12, Steel [..002L]1 x Clearance Krieghoff Classic Rifle Americase (With Cover)1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Gerber Balance Multi-Tool Black1 x Contessa Tactical One Piece QD Picatinny Ring Mount 30mm, 20 MOA1 x Gerber Metolius Pocket Folder1 x Gerber Dime Multi-Tool (Lime)1 x VFG Intensive Barrel Cleaning Felts for 8mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for 9.3mm (Box of 40)1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x VFG Barrel Cleaning Felts for 9mm (Box of 500)1 x VFG Intensive Barrel Cleaning Felts for 6.5mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for 10.3mm (Box of 30)1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x VFG Adaptor for US Rods 7-32 UNC (.22 and Over)1 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x VFG 1 Piece Steel Short Cleaning Rod with 4-4.5mm (.177) Adaptor1 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor1 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x VFG Brass Adaptor for VFG Rod 4-4.5mm (Spare)1 x VFG Pull Through Match Pocket Set, for 4-4.5mm1 x Contessa Picatinny Rail - CZ 452 / 455 (10 MOA)1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Contessa Picatinny Rail - CZ 527 (0 MOA)1 x Recknagel Picatinny Rail Haenel SLB 2000+, Alu [..0021]1 x Contessa Picatinny Rail - Tikka M55 (0 MOA)1 x Contessa QD Low Mount for Pulsar Night Vision (Picatinny)1 x Contessa Picatinny Rail - Sako TRG 22 / 42 (20 MOA)1 x Contessa QD Both Extended Picatinny Rails Mount for Blaser1 x Contessa Picatinny Rail - Tikka M690/M695 (0 MOA)1 x Contessa 30mm Rings for Simple Black - 2.5mm (Low)
Manufacturers
Useful Information