VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)

£27.43
20% VAT incl.


  • Model:333366
VFG Barrel Cleaning Felts for 4-4.5mm
Code: 333366


These small felt screw-on pellets, which are calibre specific are used with the VFG Cleaning Rod to clean your barrel. The felts screw onto the cleaning rod tip and then passed down the barrel to give a smooth and effective clean. Ideal for .17 calibres.

The 4-4.5 mm felts are recommended for the following calibres: 4 mm M 20, 4 mm, .17 Rem, 177 HMR
See which Felts suit your Calibre >>>

Supplied as small box containing: 500 felt screw-on pellets

To be used with VFG Cleaning Rod for 4-4.5mm Calibres.

Instructions for Use:
1. Take Adapter No. 66803 and screw this onto VFG Cleaning rod No. 66801 (740 mm Long) or 66802 (300 mm Short).
2. For the preliminary cleaning operation screw a VFG Super Intensive Cleaner onto the adapter.
3. Slowly push a VFG Super Intensive Cleaner through the barrel from the breech. When doing so, the special felt presses itself firmly into the grooves and follows the rifling. Repeat this procedure as often as is necessary.
4. For the final cleaning operation use normal VFG Rifle Cleaner No. 66800.
5. If the barrel is to be oiled, screw VFG Rifle Cleaner No. 66800 onto the adapter, soak this thoughly with weapon oil (Ballistol or Ustanol) and repeatedly move it back and forth in the barrel.
6. Perform the de-oiling of the barrel with normal VFG Rifle Cleaner No. 66800.

Make sure that the barrel of your rifle is free after each cleaning operation.

Although there doesn't appear to be a hole drilled in the centre of the felts, it is there, but it is very fine.

See the VFG Barrel Cleaning Catalogue >>>

Also Available:
Small Box Quantities (Standard) Small Box Quantities (Intensive) Large Pack Quantities
4 - 4.5mm Standard Felts (100) 4 - 4.5mm Intensive Felts (100) 4 - 4.5mm Standard Felts (500)
.22 Standard Felts (80) .22 Intensive Felts (80) .22 Standard Felts (500)
6mm Standard Felts (50) 6mm Intensive Felts (50) 6mm Standard Felts (500)
6.5mm Standard Felts (50) 6.5mm Intensive Felts (50) 6.5mm Standard Felts (500)
7mm Standard Felts (50) 7mm Intensive Felts (50) 7mm Standard Felts (500)
7.5mm Standard Felts (50) 7.5mm Intensive Felts (50) 7.5mm Standard Felts (500)
8mm Standard Felts (50) 8mm Intensive Felts (50) 8mm Standard Felts (500)
9mm Standard Felts (40) 9mm Intensive Felts (40) 9mm Standard Felts (500)
9.3mm Standard Felts (40) 9.3mm Intensive Felts (40) 9.3mm Standard Felts (500)
.375 Standard Felts (40) .375 Intensive Felts (40) .375 Standard Felts (500)
10.3mm Standard Felts (30) 10.3mm Intensive Felts (30) N/A
.44 Standard Felts (30) .44 Intensive Felts (30) .44 Standard Felts (250)
.45 Standard Felts (30) .45 Intensive Felts (30) N/A


Features & Cleaning Instructions Video

1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Contessa Picatinny Rail - Benelli ARGO (0 MOA)2 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x Contessa QD Low Mount for Pulsar Night Vision (Picatinny)1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Contessa Tactical One Piece QD Picatinny Ring Mount 30mm, 20 MOA1 x Contessa 25.4mm Rings for Simple Black - 5.0mm (Medium)1 x Recknagel SOB3D Silencer (ERA LOC)1 x Contessa 30mm Rings for Simple Black - 2.5mm (Low)1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Contessa 35mm Rings for Simple Black - 7.5mm (High)1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (10 MOA)1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x Contessa One Piece QD Picatinny Mount for Swarovski Rail1 x Schultz & Larsen Professional Bipod by Spartan1 x Contessa One Piece QD Picatinny Mount for Burris Scopes1 x Contessa Satin Chromed Steel Picatinny QD Rings - 30mm (8mm BH)1 x Contessa 30mm Rings for Simple Black - 5.0mm (Med)1 x Contessa Tactical One Piece QD Picatinny Ring Mount 30mm, 0 MOA1 x Krieghoff Navy Gun Slip1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Contessa Tactical One Piece QD Picatinny Ring Mount - 40mm1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA)1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x Custom Rifles of Great Britain by Bruce Potts1 x Contessa 36mm Rings for Simple Black - 5.0mm (Low)1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x AimZonic Plus Camo Sound Moderator1 x Contessa Satin Chromed Picatinny Rail - Sako 85 XS (10 MOA)1 x Contessa 34mm Rings for Simple Black - 8.0mm (Medium)1 x Contessa Blued Steel Picatinny Rings - 35mm (8mm BH)1 x Contessa 30mm Steel 11mm Dovetail Rings, 16mm BH1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Contessa Blued Steel Picatinny Rings - 1" (8mm BH)1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Contessa 40mm Rings for Simple Black - 6.0mm (Medium)1 x Contessa Lightweight Alu Picatinny Rings - 1 Inch (8mm BH)1 x Contessa Tactical One Piece Fixed Picatinny Ring Mount - 30mm1 x Contessa Lightweight Alu Picatinny Rings - 40mm (8mm BH)1 x Contessa 25.4mm Rings for Simple Black - 2.5mm (Low)1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Contessa Browning X-Bolt L Euro Rail Base for QR Mount1 x Contessa Sako 75/85 Long Euro Rail for Quick Release Mount1 x Contessa Quick Release Mount for Burris/Nikon1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x Teague Precision Choke Key1 x Bauer HD Series 8x25 Binoculars1 x Contessa QD Mount for Blaser for ATN X-Sight II
Manufacturers
Useful Information