Recknagel Weaver/Picatinny Mounts for Zeiss Rail 45º (Tri-Nut)

£228.11
20% VAT incl.


  • Model:57945-0700
Recknagel Weaver/Picatinny Mounts for Zeiss Rail with 45º
45º Angle is familiar with the modern Zeiss (ZM), Docter (Z Rail), Meopta (MR Rail), Minox (IS Rail), Leica (Leica Rail) and Schmidt & Bender (LMZ) Rail Scopes.
with Tri-Nut Fastening

Also available in Quick Release Lever Version

Height of Base - 7mm
Contents Supplied - 2x Tip-Off Mounts and Wrench Key
Code Ref: 57945-0700

These Tip-off mounts are designed to be used with the Zeiss Rail Rifle Scopes with the 45º angle, especially the Zeiss Diarange. Fit to both Weaver and Picatinny Rails. The mounts give a low overall height with the height of the bases being only 7mm. The 2 Tip off blocks have a weaver/picatinny profile and are mounted onto the rail and tightened using the supplied wrench.

Fitting Tips:
- Remove the two 45º Mounting Blocks from the Recknagel Mounts
- Drop the 45º Mounting Blocks into the Zeiss Rail slot, with the wider part of the block in first.
- Align the holes of the base component of the Recknagel Mount with the 45º Mounting Blocks, then fit the screw going through the Recknagel Mount into the 45º Mounting Block.
- Tighten the screws up fully for both of the 45º Mounting Blocks. Then afterwards slacken them off by a 1/8 turn.
- You are now able to slide the mount into position to suit the picatinny rail or weaver bases.
- We would advise to position the mount on the rail or bases one at a time, tighten up the 45º Mounting Block screws on one of the bases first.
- Once this is secured, repeat for the second base. Carefully align the second base in position and lift it off the rail/weaver base in order to tighten up the 45º Mounting Blocks.

The Recknagel Catalogue has a wide range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Recknagel Catalogue is available to browse online.
2 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x VFG Pull Through Match Pocket Set, for 4-4.5mm1 x Krieghoff "K" Logo Cap Black & White1 x Krieghoff HIVIZ Pro Sights2 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Contessa Picatinny Rail - Benelli ARGO (0 MOA)1 x Contessa QD Extra Extended Rear Picatinny Rail - Blaser1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (10 MOA)1 x Contessa QD Both Extended Picatinny Rails Mount for Blaser1 x Contessa Picatinny Rail - Anschutz 54 Only (10 MOA)1 x Recknagel Picatinny Rail Sauer 202 Std, Steel [..0080]1 x Krieghoff C-Clips (E-Clips)1 x Krieghoff Trap Special / Pro Rib Wheel Locking Wrench1 x Krieghoff Safety Catch Locking Screw Wrench1 x Parker Hale Thread to 8-32 Thread Converter1 x Contessa One Piece QD Picatinny Mount for Zeiss Rail1 x Recknagel Sling Swivel Nut Screw (ø¸ 3.6mm) [20240-0022]1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)2 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Krieghoff Choke Multi Wrench1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Krieghoff 28b Choke Wrench1 x AimZonic Compact Camo Sound Moderator1 x Recknagel Weaver/Picatinny Mount for Aimpoint Micro [57020-1200]1 x Recknagel Weaver/Picatinny Mounts for Zeiss 45º (QD Lever)1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (QD Lever)1 x Krieghoff Factory Hanger Pin1 x Krieghoff .410g Choke Wrench1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x Contessa Picatinny Rail - Bergara B14 Long (20 MOA)1 x Contessa Picatinny Rail - Anschutz 54/64 (30 MOA)1 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser1 x Contessa Picatinny Rail - Anschutz 54/64 (20 MOA)1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Contessa QD Ultra Low Blaser Mount for Pulsar Night Vision2 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x Contessa QD Extra Extended Front & Rear Picatinny Rail - Blaser1 x Contessa Quick Release Mount (Picatinny) for ATN X-Sight II1 x Contessa Picatinny Rail - CZ 527 (0 MOA)1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x Recknagel One Piece Tip-off Mounts for Swarovski [57553-0110]1 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x Recknagel Zeiss Rail 45º Components - 6mm BH1 x AimZonic Plus Camo Sound Moderator1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Contessa Picatinny Rail - Sauer 100/101 (20 MOA)1 x Contessa Picatinny Rail - Sako TRG 22 / 42 (10 MOA)1 x Contessa Picatinny Rail - Sauer 202 (20 MOA)1 x Contessa Picatinny Rail - Sauer 200 Long (20 MOA)1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Contessa Blued Steel Picatinny Rings - 40mm (14.5mm BH)1 x Contessa Picatinny Rail - CZ 550 Standard (0 MOA)1 x Gerber Paraframe II Fine Edge Knife1 x Gerber Balance Multi-Tool Black1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 6mm Stud1 x Recknagel Weaver Bases - Mauser M12 [..-302L]
Manufacturers
Useful Information