Schultz & Larsen Scope Rings 30mm, Med/High (13mm BH)

£185.00
20% VAT incl.

Available Options

  • Model:SL6025
Schultz & Larsen Scope Rings
30mm - Medium/High (13mm Base Height)


Works with a 56mm Objective: If you have a scope with a 56mm objective lens, check whether the outer measurement is 62mm or smaller. If it is, then these rings will work, with an extremely low mounting height.

Machined out of a single block of high grade steel, gas nitrated and blued, the Schultz & Larsen "Slide & Lock" scope mounts are almost certainly the lightest all-steel scope mount made anywhere in the World. Incredibly strong and virtually rust proof, due to the special hardening process, these mounts are available in a range of heights and diameters.

Total Weight of Both Rings - 109g
Ring Diameter - 30mm
Base Height (BH) - 13mm
Code Ref: SL6025

Version Types:
The mounting dimensions on the Classic and Victory Actions are slightly different to the Legacy Short Action. The Slide & Lock Mounts sit slightly lower on the Legacy Action than then do on the Classic and Victory, meaning the cross-bolt, used to fix the mounts to the action, contacts on the top of the Legacy Action. To overcome this, a narrower diameter cross bolt is used for the Legacy to ensure it does not contact the action when fitting. If you have a Legacy, please select the correct Version above.

The key Torx 15 wrench for tightening is included. The mounts attach with Torx cross bolt and, for convenience, these can be changed to QD levers.

A unique feature of the mount is the rapid change Summer or Winter positions. On both Classic and Victory models there are two locating positions for the mount (The Legacy has only one due to the shortness of the action). The forward one is for Summer use and the rear for Winter. This moves the scope about 1/2" and compensates for the differing thickness of clothing. The scope can be slackened and repositioned without the need to remount. You should fire a couple of test rounds after moving to check zero but due to the exact alignment of both positions with the bore the zero will move only slightly if at all. Certainly less than 1 MOA (about 1" at 100 yards).

1 x Briley 20b Speed Wrench - For Krieghoff1 x Contessa Picatinny Rail - Anschutz 54/64 (30 MOA)1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x Recknagel Weaver Bases - Winc. 70 Mag. <1964 [.-3095]1 x Contessa Picatinny Rail - Baikal (0 MOA)1 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Contessa Picatinny Blank Rail for Custom Rails (450mm)1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Contessa QD Mount for Blaser R8/R93 for Zeiss/Leica/Docter Rail1 x Contessa Picatinny Rail - CZ 452 / 455 (0 MOA)1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA)1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Contessa Picatinny Rail - Sako S20 (0 MOA)1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Contessa 30mm Rings for Simple Black - 5.0mm (Med)1 x Recknagel Picatinny Rail Benelli ARGO, Alu [..0076]1 x Recknagel Blank 12mm Eurorail - 150mm1 x EX Demo - Gerber Steady Tool (Phone Tripod)1 x Recknagel Picatinny Rail 204mm Blank, Steel [..0120]1 x Recknagel Picatinny Rail Antonio Zoli 1900, Alu [..0089]2 x Black Barrel Case (83cm Internal)1 x Contessa Quick Release Mount for Swarovski Rail2 x Recknagel Detachable Sling Swivel 20mm Loop - 6mm Stud1 x Gerber Myth Series Fixed Saw2 x Recknagel Detachable Sling Swivel with Nut 20mm Loop - 6mm Stud1 x VFG Magnetic Felt Clamps for Vices - 100mm1 x Recknagel Weaver/Picatinny Mounts for Zeiss 45º (QD Lever)1 x Contessa Picatinny Rail - Sako 75/85 Short - Extended/Adjustable1 x VFG Barrel Cleaning Felts for 8mm (Box of 500)1 x VFG Intensive Barrel Cleaning Felts for 8mm (Box of 50)1 x Contessa Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x Contessa Remington 700 Short Euro Rail Base for QR Mount1 x Contessa Merkel Helix Euro Rail for Quick Release Mount1 x CR2032 Camelion Lithium Battery1 x Recknagel QD Sling Swivel - Fixed Standard [23000-0000]1 x Recknagel QD Sling Swivel Socket - Fixed Step, Flat [..-1010]1 x Recknagel Sling Swivel Adaptor HK-Hook [T0510-0000]1 x Recknagel QD Sling Swivel Socket - Fixed Step, Raised [..-1020]1 x Recknagel 11mm Dovetail to Picatinny Rail Adaptor [..1011]1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x Schmierfix Grease by Liqui Moly1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x Recknagel Detachable Sling Swivel 20mm Loop - 8mm Stud1 x Contessa Spare Ring-to-Base Screws1 x Winchester 3" Folding Knife1 x Parker Hale Thread to 8-32 Thread Converter1 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x VFG Barrel Cleaning Felts for 9.3mm (Box of 500)1 x Contessa Picatinny Rail - Sauer 100/101 (0 MOA) Extended1 x Recknagel Weaver Bases - Remington 700 (6-48) [..3012]1 x Recknagel Sling Swivel Screw Magnum (ø¸ 3.6mm) [20290-0026]1 x ERATAC ZFIX Telescopic Sight Alignment Aid [T0810-0000]1 x VFG 3 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x VFG Adaptor for VFG Rods (Spare)1 x VFG Intensive Barrel Cleaning Felts for 6.5mm (Box of 50)
Manufacturers
Useful Information