Schultz & Larsen Scope Rings 30mm, X-High (20mm BH)

£185.00
20% VAT incl.


  • Model:SL6027
Schultz & Larsen Scope Rings
30mm - X-High (20mm Base Height)


Machined out of a single block of high grade steel, gas nitrated and blued, the Schultz & Larsen "Slide & Lock" scope mounts are almost certainly the lightest all-steel scope mount made anywhere in the World. Incredibly strong and virtually rust proof, due to the special hardening process, these mounts are available in a range of heights and diameters.

Total Weight of Both Rings - 114g
Ring Diameter - 30mm
Base Height (BH) - 20mm
Code Ref: SL6027

Version Types:
The mounting dimensions on the Classic and Victory Actions are slightly different to the Legacy Short Action. The Slide & Lock Mounts sit slightly lower on the Legacy Action than then do on the Classic and Victory, meaning the cross-bolt, used to fix the mounts to the action, contacts on the top of the Legacy Action. To overcome this, a narrower diameter cross bolt is used for the Legacy to ensure it does not contact the action when fitting. If you have a Legacy, please select the correct Version above.

The key Torx 15 wrench for tightening is included. The mounts attach with Torx cross bolt and, for convenience, these can be changed to QD levers.

A unique feature of the mount is the rapid change Summer or Winter positions. On both Classic and Victory models there are two locating positions for the mount (The Legacy has only one due to the shortness of the action). The forward one is for Summer use and the rear for Winter. This moves the scope about 1/2" and compensates for the differing thickness of clothing. The scope can be slackened and repositioned without the need to remount. You should fire a couple of test rounds after moving to check zero but due to the exact alignment of both positions with the bore the zero will move only slightly if at all. Certainly less than 1 MOA (about 1" at 100 yards).

1 x Schultz & Larsen T-Handle Wrench (4mm Hex)1 x Krieghoff Spares Kit3 x Parker Hale Thread to 8-32 Thread Converter1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm2 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Krieghoff Navy Gun Slip1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Krieghoff Brass Front Sight Bead1 x Recknagel SOB02 Silencer (Standard Thread)1 x Recknagel SECURA Sling Swivel Magnum 25.4mm [22011-9500]1 x Black Leather Shell/Cartridge Pouch1 x ERATAC UNI-Interface Picatinny Rail, 85mm [T0908-0013]1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x Recknagel Grip Cap Compartment1 x Ex-Demo Contessa One Piece QD Picatinny Mount Body1 x Recknagel Weaver Bases - Browning A-Bolt III [57080-302T]2 x Anschütz Biathlon Harness1 x Recknagel SECURA Sling Swivel - 20mm Wide - 6mm [22009-1000]1 x Recknagel Weaver Bases - Winc. 70 Mag. <1964 [.-3095]1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Gerber Metolius Pocket Folder1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Recknagel SECURA Sling Swivel - 25.4mm Wide - 8mm [22011-3000]
Manufacturers
Useful Information