VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)

£12.47
20% VAT incl.


  • Model:332068
VFG Barrel Intensive Cleaning Felts for 4 - 4.5mm
Code: (66799) 332068


These small felt screw-on pellets, which are calibre specific are used with the VFG Cleaning Rod to clean your barrel. The felts screw onto the cleaning rod tip and then passed down the barrel to give a smooth and effective clean. The intensive felt wads are embedded with aggressive/coarse phosphor bronze fibres for proper cleaning that will not damage a steel airgun barrel. Ideal for .17 calibres.

The 4-4.5 mm felts are recommended for the following calibres: 4 mm M 20, 4 mm Randz, .17 Rem
See which Felts suit your Calibre >>>

Supplied as small box containing:
100 intensive felt screw-on pellets

To be used with VFG Cleaning Rod for 4-4.5mm Calibres.

Instructions for Use:
1. Take Adapter No. 66803 and screw this onto VFG Cleaning rod No. 66801 (740 mm Long) or 66802 (300 mm Short).
2. For the preliminary cleaning operation screw a VFG Intensive Cleaner onto the adapter.
3. Slowly push a VFG Super Intensive Cleaner through the barrel from the breech. When doing so, the special felt presses itself firmly into the grooves and follows the rifling. Repeat this procedure as often as is necessary.
4. For the final cleaning operation use normal VFG Rifle Cleaner No. 66800.
5. If the barrel is to be oiled, screw VFG Rifle Cleaner No. 66800 onto the adapter, soak this thoughly with weapon oil (Ballistol or Ustanol) and repeatedly move it back and forth in the barrel.
6. Perform the de-oiling of the barrel with normal VFG Rifle Cleaner No. 66800.

Make sure that the barrel of your weapon is free after each cleaning operation.

See the VFG Barrel Cleaning Catalogue >>>

Also Available:
Small Box Quantities (Standard) Small Box Quantities (Intensive) Large Pack Quantities
4 - 4.5mm Standard Felts (100) 4 - 4.5mm Intensive Felts (100) 4 - 4.5mm Standard Felts (500)
.22 Standard Felts (80) .22 Intensive Felts (80) .22 Standard Felts (500)
6mm Standard Felts (50) 6mm Intensive Felts (50) 6mm Standard Felts (500)
6.5mm Standard Felts (50) 6.5mm Intensive Felts (50) 6.5mm Standard Felts (500)
7mm Standard Felts (50) 7mm Intensive Felts (50) 7mm Standard Felts (500)
7.5mm Standard Felts (50) 7.5mm Intensive Felts (50) 7.5mm Standard Felts (500)
8mm Standard Felts (50) 8mm Intensive Felts (50) 8mm Standard Felts (500)
9mm Standard Felts (40) 9mm Intensive Felts (40) 9mm Standard Felts (500)
9.3mm Standard Felts (40) 9.3mm Intensive Felts (40) 9.3mm Standard Felts (500)
.375 Standard Felts (40) .375 Intensive Felts (40) .375 Standard Felts (500)
10.3mm Standard Felts (30) 10.3mm Intensive Felts (30) N/A
.44 Standard Felts (30) .44 Intensive Felts (30) .44 Standard Felts (250)
.45 Standard Felts (30) .45 Intensive Felts (30) N/A


Features & Cleaning Instructions Video

2 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA)1 x Contessa QD Both Extended Picatinny Rails Mount for Blaser1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Contessa One Piece QD Picatinny Mount for Swarovski Rail2 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser1 x Contessa Shiny Chromed Steel Picatinny Rings - 1" (8mm BH)1 x Contessa Satin Chromed Steel Picatinny Rings - 1" (8mm BH)1 x WalkStool Spare Leg Joints1 x Black Barrel Case (83cm Internal)1 x Contessa 6mm Rib Blank Euro Rail Base for Quick Release Mount1 x Contessa Sauer 202 Standard Euro Rail Base for QR Mount1 x Contessa Picatinny Blank Rail for Custom Rails (450mm)1 x Bauer HD Series 8x25 Binoculars1 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Contessa Shiny Chromed Picatinny Rail - Howa Long (0 MOA)1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Contessa Picatinny Rail - Anschutz 54/64 (30 MOA)1 x Contessa Sauer 202 Magnum Euro Rail Base for QR Mounts1 x Contessa Satin Chromed Picatinny Rail - Howa Short (20 MOA)1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Contessa Picatinny Rail - Tikka T1 / T1X (20 MOA)1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Contessa QD Low Mount for Pulsar Night Vision (Euro Rail)1 x MSA Sordin - Hygiene Kit - Foam Seals1 x Contessa Quick Release Mount (Euro Rail) for ATN X-Sight II1 x Contessa Quick Release Picatinny Rail1 x ERATAC 34mm One Piece Extended Ring Mount (Nut)1 x Silva Dine Duo Kit - Turquoise/White1 x Recknagel Super Express 2 Leaf Sight [15400-3036]1 x Recknagel Picatinny Bases - Schultz & Larsen1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x Recknagel Front Ramp [12000-0000]1 x Contessa Picatinny Rail - Sako S20 (0 MOA)1 x Contessa Picatinny Rail - CZ 452 / 455 (20 MOA)1 x VFG Intensive Barrel Cleaning Felts for 10.3mm (Box of 30)1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (QD Lever)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Winchester 3" Folding Knife1 x Contessa Picatinny Rail - Sako 75/85 Medium (0 MOA) Adjustable1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 500)1 x Contessa Picatinny Rail - Sako S20 (20 MOA)1 x Contessa Remington 700 Short Euro Rail Base for QR Mount1 x ERATAC KeyMod Picatinny Rail, 3 Slots [T4903-0010]2 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x VFG Intensive Barrel Cleaning Felts for .375 (Box of 40)1 x Contessa Picatinny Rail - CZ 550 Magnum (0 MOA)1 x ERATAC KeyMod Adaptor for HK Hook [T4500-0000]1 x VFG Intensive Barrel Cleaning Felts for .45 (Box of 30)1 x Contessa Picatinny Rail - Sako S20 (0 MOA) - Extended2 x ERATAC Ultra Lightweight One Piece Ring Mount1 x Schultz & Larsen Professional Bipod by Spartan1 x Gerber Gator Combo Replacement Saw1 x Recknagel Hood for Front Ramp [13020-1580]1 x ERATAC 34mm One Piece Extended Ring Mount (Lever)1 x ERATAC 30mm One Piece Extended Ring Mount (Nut)1 x Contessa Merkel Helix Euro Rail for Quick Release Mount1 x Gerber Descent - Folding Knife1 x Clearance Americase Cordura Case Cover (32x11x3")2 x Recknagel Brass Front Sight Bead 2.5mm [11400-0250]1 x ERATAC Picatinny Riser Mount Block (QD)1 x ERATAC KeyMod Adaptor for Harris Bipod Adaptor [T4390-0007]1 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x VFG Pull Through Pocket Set for .22 Upwards1 x Contessa Sako 75/85 Long Euro Rail for Quick Release Mount1 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor1 x VFG Adaptor for US Rods 7-32 UNC (.22 and Over)1 x Contessa Picatinny Rail - Tikka M690/M695 (0 MOA)1 x Contessa Quick Release Picatinny Extended Rail (Night Vision)1 x Contessa Picatinny Rail - Browning X Bolt Super Short Extended1 x ERATAC 30mm Ring with UNI-Interface [03680-5730]1 x ERATAC 56mm Ring with UNI-Interface [03680-5757]1 x Recknagel Fibre Optic Front Sight Bead 9.5mm [11024-4095]1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)2 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x Walkstool Steady1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x Contessa QD Extra Extended Rear Picatinny Rail - Blaser1 x Contessa Picatinny Rail - Browning X Bolt Long (0 MOA) Extended1 x VFG Adaptor for VFG Rods (Spare)1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (Tri-Nut)1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x EX Demo - Gerber Steady Tool (Phone Tripod)
Manufacturers
Useful Information