Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount

£71.56
20% VAT incl.


  • Model:BA31
Contessa Schultz & Larsen - Victory, Classic, Hunter & Ambassador
Euro Rail Base for use with Quick Release Mounts


Length: - 165mm
Weight: - 82g
Height - 5mm BH
Code: BA31
Material:
Blued Steel

Fitting: When fitting, we would always recommend using a thread locker adhesive on the screws. Fit the screws on the rear base first but do not tighten fully, then fit the front screws next but do not fully tighten. Gradually tighten one screw at a time in small increments until all screws are fully tightened and flush. This will ensure a good solid fit to the rifle.

Note: The two rear holes on this rail match up for the Victory, Classic, Hunter and Ambassador 21.8mm. But the second to third holes on the Victory & Ambassador are 2mm further apart than the holes on the Classic and Hunter. This means, the rail has incorporated elongated holes for the front base. This is to allow both of the model variations to fit. This has no loss of accuracy and due to the countersink and design of the hole, it will align perfectly centrally to the action.

For use with Contessa Part:
Quick Release Base (Bolt Action) Code Ref: SB02

This Quick Release Base is precision made by Contessa Alessandro & C. s.n.c. The fixed base is made to fit directly to your rifle, then you use the Contessa Quick Release Base, either one of the possible models available, and using it's QD clamping system you can attach the mount to the base. This system allows you to interchange scopes on a single rifle, and even change a scope to different rifles in seconds using the Contessa system.

The Contessa Euro Rail System -
Find Out More and How it Works

To see the available Quick Release Mounts - Click Here

Contents Supplied:
- 1 x Euro Rail Base for Schultz & Larsen,
- Screws
- Wrench

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.

Fitting and Features Video

1 x Contessa Picatinny Rail - Anschutz 54/64 (20 MOA)1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Contessa Tikka T1 Euro Rail for Quick Release Mount2 x Schmierfix Grease by Liqui Moly1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Schultz & Larsen Professional Bipod by Spartan1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Black Leather Shell/Cartridge Pouch1 x Recknagel Picatinny Rail Heym SR21, Alu [..0022]1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Ex-Demo Briley Choke Tube, K-80 Parcours - FULL (01)1 x Black Barrel Case (83cm Internal)1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Recknagel SOB3D Silencer (ERA LOC)1 x Contessa Shotgun Rib Mount for Red Dot Sights (Leica/Docter/Burris)1 x Anschütz Biathlon Harness1 x Ex-Demo Contessa One Piece QD Picatinny Mount Body1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x VFG Wipe Length Stopper & Guide - Shotgun1 x Recknagel Replacement Polyform Lever [00088-5700]1 x Badge - Cob Bronze1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Contessa Picatinny Rail - Merkel Helix (0 MOA)2 x Gerber Myth Series Fixed Saw1 x Jones Gun Nut Kit1 x ERATAC QD Sling Swivel - Loop Swivel [T0510-0001]1 x Krieghoff "K" Collectors Badge1 x Gerber Gator Combo Replacement Saw1 x Contessa Blued Steel Picatinny Rings - 1" (8mm BH)1 x VFG Intensive Barrel Cleaning Felts for 7mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x Jones Thru-the-Pad Adjuster1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Superknife SK Edge Utility - Camo (3 for 1 Special Offer)1 x Bauer HD Series 8x25 Binoculars1 x Winchester 3" Folding Knife1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Hi Viz - How to Become a Better Shooter1 x Contessa Picatinny Rail - Tikka M690/M695 (0 MOA)1 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x ERATAC UNI-Interface Picatinny Rail, 85mm [T0908-0013]1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)1 x Contessa Picatinny Rail - Ruger American (0 MOA)1 x VFG Adaptor for US Rods 7-32 UNC (.22 and Over)
Manufacturers
Useful Information