Recknagel Weaver/Picatinny Mounts for Zeiss 45º (QD Lever)

£228.11
20% VAT incl.


  • Model:57545-0700
Recknagel Weaver/Picatinny Mounts for Zeiss 45º
45º Angle is familiar with the modern Zeiss (ZM), Docter (Z Rail), Meopta (MR Rail), Minox (IS Rail), Leica (Leica Rail) and Schmidt & Bender (LMZ) Rail Scopes.
with QD Polyform Levers

Also available in Tri-Nut Version

Height of Base - 7mm
Contents Supplied - 2x Tip-Off Mounts, 1x Wrench
Code Ref: 57545-0700

These Tip-off mounts are designed to be used with the Zeiss Rifle Scopes, especially the Zeiss Diarange and all scopes with 45º angle. The mounts give a low overall height with the height of the bases being only 7mm. The 2 Tip off blocks have a weaver/picatinny profile and are mounted onto the rail and tightened using Quick Detachable Polyform Levers.

Fitting Tips:
- Remove the two 45º Mounting Blocks from the Recknagel Mounts
- Drop the 45º Mounting Blocks into the Zeiss Rail slot, with the wider part of the block in first.
- Align the holes of the base component of the Recknagel Mount with the 45º Mounting Blocks, then fit the screw going through the Recknagel Mount into the 45º Mounting Block.
- Tighten the screws up fully for both of the 45º Mounting Blocks. Then afterwards slacken them off by a 1/8 turn.
- You are now able to slide the mount into position to suit the picatinny rail or weaver bases.
- We would advise to position the mount on the rail or bases one at a time, tighten up the 45º Mounting Block screws on one of the bases first.
- Once this is secured, repeat for the second base. Carefully align the second base in position and lift it off the rail/weaver base in order to tighten up the 45º Mounting Blocks.

The Recknagel Catalogue has a wide range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Recknagel Catalogue is available to browse online.
1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)1 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x VFG Intensive Barrel Cleaning Felts for .44 (Box of 30)2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)2 x Krieghoff HIVIZ Pro Sights1 x AG3 / 392A Alkaline Batteries (10 Pack)1 x Bauer ED 8x50 Binoculars1 x Krieghoff Trigger & Selector Locking Wrench1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x Bauer Outdoor 10x25 Binoculars1 x K-80 Barrel Weight Balance System2 x Parker Hale Thread to 8-32 Thread Converter1 x Krieghoff Sight Bead Blanking Screw1 x Bauer - Aluminium 11mm Dovetail 30mm Rings (14mm High)1 x Bauer ED 8x42 Binoculars1 x Anschütz Biathlon Harness1 x Bauer Outdoor 8x21 Binoculars1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Contessa Shotgun Rib Mount for Red Dot Sights (Leica/Docter/Burris)1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Contessa Tikka T1 Euro Rail for Quick Release Mount1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x VFG Wipe Length Stopper & Guide - Shotgun1 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x Recknagel Weaver Bases - Heym SR 20 [57080-3060]1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x VFG 3 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x Contessa Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x Schultz & Larsen T-Handle Wrench (4mm Hex)1 x VFG Adaptor for VFG Rods (Spare)1 x VFG Barrel Cleaning Felts for 8mm (Box of 50)1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x Contessa Blued Steel Picatinny Rings - 1" (8mm BH)1 x VFG Barrel Cleaning Felts for 7mm (Box of 50)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x Contessa Picatinny Rail - Tikka T1 / T1X (20 MOA)1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x Schmierfix Grease by Liqui Moly1 x VFG Brass Adaptor for VFG Rod 4-4.5mm (Spare)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Intensive Barrel Cleaning Felts for 8mm (Box of 50)1 x VFG Magnetic Felt Clamps for Vices - 150mm1 x VFG Quick Clean Felts for .22 (Box of 80)1 x Contessa Picatinny Rail - CZ 527 (0 MOA)1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)1 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Contessa QD Extra Extended Rear Picatinny Rail - Blaser1 x Schultz & Larsen Torx Key for Scope Mounts1 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x VFG Barrel Cleaning Felts for 10.3mm (Box of 30)1 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x Recknagel Grip Cap Full Domed [24000-0100]1 x EX Demo - Gerber Metolius Pocket Folder1 x WalkStool Set of Spare Red Spring1 x Recknagel Weaver Bases - Winc. 70 Mag. >1964 [.-3025]1 x VFG Barrel Cleaning Felts for 9.3mm (Box of 500)1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Krieghoff Classic "Big Five" Badge1 x Recknagel Detachable Magnum Sling Swivel 25.4mm Loop - 8mm Stud1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 500)1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x VFG Adaptor for US Rods 7-32 UNC (.22 and Over)1 x Schultz & Larsen Picatinny Rail for Victory (0 MOA)1 x Winchester 3" Folding Knife1 x VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x VFG Adaptor for Parker Hale English Rods (over 7mm)1 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x VFG Intensive Barrel Cleaning Felts for 10.3mm (Box of 30)1 x Contessa Tikka T3 Euro Rail Base for Quick Release Mount1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Contessa Picatinny Rail - Sauer 202 (20 MOA)1 x VFG Barrel Cleaning Felts for 9.3mm (Box of 40)1 x Contessa Spare Ring-to-Base Screws
Manufacturers
Useful Information