Contessa Picatinny Rail - Sako 75/85 X-Short - Extend/Adjustable

£182.15
20% VAT incl.


  • Model:PH31N/NV/0
Contessa Extended Picatinny Rail for Sako 75* / 85 X-Short
With 0 MOA
Fits Sako Models: 75 / 85
Fits Calibres: .204 Ruger / .222 Rem / .223 Rem
(Please always double check the action size as this is a guide for the action size)

Rail Length: - 185mm
Extension Rearwards: - 50mm
Distance between Bases: - 50 - 73mm
Height (BH) - 12mm
MOA - 0 MOA
Weight: - 205g
Material: - Steel
Code Ref: PH31N/NV/0

Contents Supplied:
- 1x Steel Rail,
- 1x Rear Base,
- 1x Front Base,
- 1x Wrenches,
- Fitting Screws all included

This Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The mount is precision made to fit the Sako Tapered Dovetail System. Supplied as components, the separate bases are mounted to the rifle and locked in place with vertical locking screws (we do suggest giving the bases a firm tap with a plastic hammer to make sure they're fitted on fully). This is the Extended Version designed to be used with scopes such as night vision, which need to be mounted rearwards for better eye relief.

You can't always tell which size Sako action you have from the calibre, so to check which rail fits your rifle all you need to do is measure the length between your two bases, i.e. measure the length of your ejection port.
If it's approx. 56mm you need the Sako X-Short Rail
74mm you need the Sako Short Rail.
If it's approx. 84mm you need the Sako Medium Rail.
If it's approx. 94mm you need the Sako Long Rail.


Distance Spacing: (distances between bases)
30mm (Dovetail Base) / 50 - 73mm / 31mm (Dovetail Base)

Fitting:
The independent front and rear bases slide onto the Sako dovetails, then are tightened to the action using locking screws from the top of the base. Once the bases are fitted, the length of picatinny fits over the top of them and is screwed on to the bases to secure them in place. Using thread locker adhesive to ensure the screws don't loosen under recoil can be used if required.

Fitting Guide Video

A common issue with the Sako rifles is that the taper on the rifle is not the same as the taper on the picatinny rail. Contessa have designed their rail to fit as accurately as possible, tested on a wide number of Sako 85 actions. We have discovered there are slight variations in the Sako rifle dovetails due to factory tolerances, so even just a 1/100 of a mm can mean a poor fit. A method we use to overcome this poor fit is to hand fit the bases to the rifle using a file. We can instruct on a good method if this is the case - email us at sales@alanrhone.com

Other Models Available:
Sako 75/85 X-Short (0 MOA)
Sako 75/85 X-Short Adjustable (0 MOA)
Sako 75/85 X-Short Extended (0 MOA)
Sako 75/85 X-Short Extended / Adjustable (0 MOA)
Sako 75/85 Short Adjustable (0 MOA)
Sako 75/85 Short Extended / Adjustable (0 MOA)
Sako 75/85 Medium (0 MOA)
Sako 75/85 Medium Adjustable (0 MOA)
Sako 75/85 Medium Extended (0 MOA)
Sako 75/85 Long (0 MOA)
Sako 75/85 Long Adjustable (0 MOA)

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.
1 x VFG Barrel Cleaning Felts for 7mm (Box of 50)1 x VFG Barrel Cleaning Felts for 7mm (Box of 500)1 x Recknagel Picatinny Rail Remington 700 L, Alu [..0112]3 x Krieghoff Navy Gun Slip1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Contessa Lightweight Alloy Picatinny Mount for Docter Red Dot Sight2 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Bauer Outdoor 10x25 Binoculars1 x Contessa Spare Screw M10 for Anschutz/CZ Rails1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Contessa QD Ultra Low Blaser Mount for Pulsar Night Vision3 x Krieghoff HIVIZ Pro Sights3 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Contessa Quick Release Mount (Picatinny) for ATN X-Sight II1 x Contessa 35mm Rings for Simple Black - 7.5mm (High)1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (0 MOA)1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Contessa Blued Ergal Picatinny Rings - 36mm (8mm BH)2 x Contessa Satin Chromed Steel Picatinny QD Rings - 30mm (8mm BH)1 x Contessa QD Both Extended Picatinny Rails Mount for Blaser1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Teague Precision Choke Key1 x Contessa One Piece QD Picatinny Mount for Burris Scopes1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Contessa One Piece QD Picatinny Mount for Zeiss Rail1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x VFG 3 Piece Aluminium Cleaning Rod for 7mm and Over, + Adaptor1 x Contessa Spare Ring-to-Base Screws1 x Schmierfix Grease by Liqui Moly1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Barrel Cleaning Felts for 10.3mm (Box of 30)1 x Contessa Picatinny Rail - Sauer 202 (10 MOA)1 x WalkStool Set of Spare Red Spring1 x Contessa Picatinny Rail - Baikal (0 MOA)2 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x Contessa Picatinny Rail - Sako 75/85 Long (0 MOA)1 x Contessa 25.4mm Rings for Simple Black - 2.5mm (Low)1 x Contessa Picatinny Rail - Sako 75/85 Medium (20 MOA)1 x Parker Hale Thread to 8-32 Thread Converter1 x Gerber Myth Series Fixed Saw1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Krieghoff C-Clips (E-Clips)1 x Contessa 30mm Rings for Simple Black - 2.5mm (Low)1 x K-80 Barrel Weight Balance System1 x Contessa Remington 700 Short Euro Rail Base for QR Mount1 x Black Barrel Case (83cm Internal)1 x Contessa Picatinny Rail - Bergara B14 Long (20 MOA)1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Contessa Picatinny Rail - Sauer 200 Long (20 MOA)1 x Contessa Picatinny Rail - Sako TRG 22 / 42 (10 MOA)1 x Contessa Picatinny Rail - Sauer 100/101 (0 MOA) Extended1 x Contessa Picatinny Rail - CZ 452 / 455 (20 MOA)1 x Recknagel Sling Swivel Screw (ø¸ 3mm) [20205-0022]1 x Recknagel Grip Cap Compartment1 x Recknagel Weaver Bases - Browning Acera [..-3077]1 x Recknagel Weaver Bases - Browning A-Bolt I/II [57080-3020]1 x Recknagel Weaver Bases - Browning BAR/BLR [57080-3003]1 x Recknagel Weaver Bases - Browning X-Bolt [57080-301P]1 x Recknagel SECURA Sling Swivel - 20mm Wide - 6mm [22009-1000]1 x Contessa Picatinny Rail - Sako 75/85 X-Short (0 MOA)
Manufacturers
Useful Information