VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 25)

£12.47
20% VAT incl.


  • Model:332059
VFG Barrel Intensive Cleaning Felts for 20 Bore
Code: 332059


These felt screw-on pellets, which are calibre specific are used with the VFG Cleaning Rod to clean your barrel. The felts screw onto the cleaning rod tip and then passed down the barrel to give a smooth and effective clean. The intensive felt wads are embedded with aggressive/coarse phosphor bronze fibres for proper cleaning that will not damage a steel barrel

The 20 Bore felts are to be used for 20 Bore Shotguns only

Supplied as small box containing:
25 intensive felt screw-on pellets


Instructions for Use:
1. Take Adapter and screw this onto VFG Cleaning rod No. 66889 (900 mm Long).
2. Screw a VFG felt cleaner onto the coarse thread of the adapter.
3. Place a second VFG felt cleaner onto the metric thread (used together a screw for the cleaning of shotguns)
4. Push the adapter with the two felts carefully through the barrel from the breech end and out of the muzzle. The special felts compress into the rifling and follow it exactly. The forward pellet removes the fouling out of the muzzle and by pulling back the rod, the dirty pellet drops off the metric thread, leaving the screwed pellet to polish the barrel by pushing the rod backwards and forwards.
5. If the barrel is to be oiled, screw VFG Rifle Cleaner onto the adapter, soak this thoroughly with weapon oil (Ballistol or Ustanol) and repeatedly move it back and forth in the barrel.
6. To remove the oil repeat steps 1 - 4.
7. In order to remove rubbed off metal, please use Intensive Cleaners.

Make sure that the barrel of your weapon is free after each cleaning operation.

See the VFG Barrel Cleaning Catalogue >>>
4 x Schmierfix Grease by Liqui Moly1 x Krieghoff K-80 Badge "K-80 Sport" Logo2 x WalkStool Set of Spare Red Spring2 x ERATAC Bubble Level [T0940-0002]3 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Krieghoff Brass Front Sight Bead1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable3 x Krieghoff HIVIZ Pro Sights2 x Bauer Outdoor 8x21 Binoculars1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Krieghoff Navy Gun Slip1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set2 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)2 x Custom Rifles of Great Britain by Bruce Potts1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x Ziegler Quick Release Mount for Blaser - 40mm Rings2 x Black Barrel Case (83cm Internal)1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus2 x Starkie Blue (A.K.A Smurf Poo)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Schultz & Larsen Professional Bipod by Spartan1 x Ebony & Brass 20 Bore Snap Caps1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings3 x Recknagel Replacement Polyform Lever [00088-5700]1 x ERATAC Offset Picatinny to UNI-Interface Adaptor [T0530-0000]1 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x ERATAC 30mm Ring with UNI-Interface [03680-5730]1 x Recknagel Extended Rail Remington 700 Long [57250-0112]1 x Recknagel Spare Tri-Nut Wrench 00088-00861 x Recknagel Spare Ring Cap Screw M3.5 x 7.4mm [..0880]1 x Recknagel Stock Shield - 2 Point Shield Flat1 x Recknagel Stock Shield - 2 Point Shield Contoured1 x Recknagel Grip Cap Skeleton Pointed [24060-0200]1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Contessa Picatinny Rail - Sako 75/85 X-Short - Extended1 x WalkStool Spare Leg Joints1 x Contessa Picatinny Rail - CZ 452 / 455 (0 MOA)1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x Contessa Spare Ring-to-Base Screws1 x Recknagel Spare Nut for Picatinny Mounts [00001-045A]1 x Recknagel Grip Cap Domed with Edge [24000-0200]1 x Recknagel Safety for Mauser K98 [30100-5000]1 x Recknagel Barrel Banded Front Ramp [12530-....]1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x Contessa Blued Steel Picatinny Rings - 35mm (8mm BH)2 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)2 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)2 x VFG Barrel Cleaning Felts for .44 (Box of 30)2 x VFG Intensive Barrel Cleaning Felts for .44 (Box of 30)1 x Schultz & Larsen Torx Key for Scope Mounts1 x VFG Barrel Cleaning Felts for .375 (Box of 500)1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x Contessa Spare Rail Screws 6-48 x 8.5mm Long1 x VFG Intensive Barrel Cleaning Felts for 10.3mm (Box of 30)1 x Contessa Picatinny Rail - Merkel Helix (0 MOA)1 x VFG Intensive Barrel Cleaning Felts for 6.5mm (Box of 50)1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor
Manufacturers
Useful Information