Contessa Picatinny Rail - Sako 75/85 Long (0 MOA) Adjustable

£136.61
20% VAT incl.


  • Model:PH14N/0
Contessa Picatinny Rail for Sako 75 / 85 Long
With 0 MOA
Adjustable to fit various model variations
Primarily fits Sako Models: 75 / 85 but can also fit older models using the Sako tapered dovetail system too.
Fits Calibres: .300 Win Mag / .338 Win Mag / .375 H&H Mag / 7mm Rem Mag
Also the XL, Extra Long 85 Models: .338 Lap Mag, .416 Rigby, .450 Rigby, .500 Jeffrey
(Please always double check the action size as this is a guide)

Rail Length: - 170mm
Distance between Bases: - 87mm - 110mm
Height (BH) - 12.5mm
MOA - 0 MOA
Material: - Steel
Code Ref: PH14N/0

Contents Supplied:
- 1x Steel Rail,
- 1x Rear Base,
- 1x Front Base,
- 3x Wrench,
- Fitting Screws all included

Distance Spacing: (distances between bases)
30mm (Dovetail Base) / 87 - 110mm / 31mm (Dovetail Base)

This Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The mount is precision made to fit the Sako Tapered Dovetail System. Supplied as components, the separate bases are mounted to the rifle and locked in place with vertical locking screws (we do suggest giving the bases a firm tap with a plastic hammer to make sure they're fitted on fully).
Then the picatinny rail is attached to the bases using the screws provided. As the picatinny rail is adjustable in length, provided the bases on your Sako are between 87mm and 110mm apart, the rail will be able to fit.

Fitting:
The independent front and rear bases slide onto the Sako dovetails, then are tightened to the action using locking screws from the top of the base. Once the bases are fitted, the length of picatinny fits over the top of them and is screwed on to the bases to secure them in place. Using thread locker adhesive to ensure the screws don't loosen under recoil can be used if required.

Fitting Guide Video

Potential Fitting Issue:
A common issue with the Sako rifles is that the taper on the rifle is not the same as the taper on the picatinny rail. Contessa have designed their rail to fit as accurately as possible, tested on a wide number of Sako 85 actions. We have discovered there are slight variations in the Sako rifle dovetails due to factory tolerances, so even just a 1/100th of a mm can mean a poor fit. A method we use to overcome this poor fit is to hand fit the bases onto the rifle using a file. You may discover that the bases do not slide on fully flush with the back of the bases on the rifle, especially on older models of Sako which predate the Sako 85. If you need any advice on hand fitting please contact us.

Other Models Available:
Sako 75/85 X-Short (0 MOA)
Sako 75/85 X-Short Adjustable (0 MOA)
Sako 75/85 X-Short Extended (0 MOA)
Sako 75/85 X-Short Extended / Adjustable (0 MOA)
Sako 75/85 Short Adjustable (0 MOA)
Sako 75/85 Short Extended / Adjustable (0 MOA)
Sako 75/85 Medium (0 MOA)
Sako 75/85 Medium Adjustable (0 MOA)
Sako 75/85 Medium Extended (0 MOA)
Sako 75/85 Long (0 MOA)
Sako 75/85 Long Adjustable (0 MOA)
The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.



You might also like...

2 x Parker Hale Thread to 8-32 Thread Converter3 x Schultz & Larsen Superdome IR Moderator (Over Barrel)2 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)4 x Krieghoff HIVIZ Pro Sights2 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)3 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)2 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master2 x Krieghoff Pro Choke Box1 x Krieghoff "K" Denim Cap - Grey1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)4 x Krieghoff Spares Kit5 x Krieghoff Trigger Screw2 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)2 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)3 x Krieghoff Ejector Ball and Spring1 x Recknagel SOB3D Silencer (ERA LOC)1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x K-80 Forward Position Trigger - Steel1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 04 [8332]2 x Schmierfix Grease by Liqui Moly2 x Krieghoff Navy Gun Slip2 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)2 x AimZonic Plus Camo Sound Moderator1 x Schultz & Larsen Professional Bipod by Spartan1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm2 x Anschütz Biathlon Harness3 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes2 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes2 x Krieghoff Brass Front Sight Bead1 x Contessa 35mm Rings for Simple Black - 7.5mm (High)1 x K-80 Stock Weight for Balance System1 x Ex-Demo Contessa One Piece QD Picatinny Mount Body2 x Krieghoff Sight Bead Blanking Screw1 x Krieghoff C-Clips (E-Clips)2 x Krieghoff Front Sight Bead (Standard)1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)2 x Krieghoff 2013 Badge (Collectors Badge)1 x Krieghoff Achievement Badge 200 Straight (Black)1 x Recknagel Spare Ring Cap Screw M3.5 x 7.4mm [..0880]1 x Silva Dine Duo Kit - Purple/White1 x Teague Precision Choke Key1 x Recknagel Standard Banded Swivel Ring [22620-....]1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 03 [8733]1 x Bear Grylls Pocket Tool1 x Recknagel Super Express 2 Leaf Sight [15400-3036]1 x Schultz & Larsen Take Down Rifle Case1 x Bauer ED 8x42 Binoculars1 x Krieghoff 2011 Badge (Collectors Badge)2 x Bauer HD 8x42 Binoculars1 x Contessa Satin Chromed Picatinny Rail - Howa Short (0 MOA)1 x Bauer HD Series 8x25 Binoculars2 x Bear Grylls Basic Survival Kit by Gerber2 x Contessa Picatinny Rail - Ruger American (0 MOA)1 x Krieghoff Brass Mid Sight Bead2 x Silva Map Measurer (Mechanical)2 x Contessa Picatinny Rail - Anschutz 54/64 (30 MOA)2 x Krieghoff Factory Hanger Pin2 x Krieghoff Achievement Badge 100/3001 x HJB 6-24x50 Rifle Scope (Mil-Dot)1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x Contessa Lightweight Alu Picatinny Rings - 1 Inch (8mm BH)1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8005]1 x Bauer ED 10x42 Binoculars1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Contessa Picatinny Rail - Bergara B14 Short (0 MOA)2 x Krieghoff K-Diamond Beanie - Grey1 x Bauer HD 8x56 Binoculars1 x Contessa Picatinny Rail - Bergara B14 Long (20 MOA)1 x Contessa CZ 527 Euro Rail for Quick Release Mount1 x Krieghoff K-Diamond Beanie - Navy1 x Bauer - Aluminium 11mm Dovetail 30mm Rings (14mm High)1 x Jones Thru-the-Pad Adjuster1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x AAA x 4 Camelion Plus Alkaline Batteries1 x Bear Grylls Scout Essentials Kit1 x Bauer Outdoor 8x21 Binoculars1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x AA x 4 Camelion Plus Alkaline Batteries1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 04 [8331]1 x Krieghoff .410g Choke Wrench1 x K-80 Standard Trigger - Black Titanium1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8335]1 x Krieghoff Extended Pillars for Adjustable Comb1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8336]1 x Krieghoff Trap Special / Pro Rib Wheel Locking Wrench1 x Black Barrel Case (83cm Internal)1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)2 x K-80 Standard Trigger - Gold Titanium1 x Krieghoff Comb Wrench (T-Handle)2 x Jones Gun Nut Kit1 x Krieghoff "K" Denim Cap - Navy1 x Krieghoff Shell Bag1 x K-80 Forward Position Trigger - Black Titanium1 x VFG Magnetic Felt Clamps for Vices - 125mm1 x Clearance Krieghoff Classic Rifle Americase (No Cover)2 x Recknagel Brass Front Sight Bead 2.5mm [11400-0250]1 x VFG Magnetic Felt Clamps for Vices - 80mm1 x Krieghoff Achievement Badge 25 Straight1 x Ex-Demo K-80 Steel 12b Choke Tube #3 (036)1 x Gerber Paraframe II Fine Edge Knife1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x Ex-Demo K-80 Steel 12b Hanger #51 x Gerber Gator Combo Replacement Saw1 x Clearance Americase Cordura Case Cover (32x11x3")1 x Recknagel QD Sling Swivel Socket - Rotating, Flat [..-1010]2 x Contessa QD Mount for Blaser for ATN X-Sight II1 x Recknagel Weaver Bases - H&K SLB 2000 [..-3008]1 x Contessa QD Mount for Blaser R8/R93 for Zeiss/Leica/Docter Rail2 x Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser1 x Recknagel Weaver Bases - Browning A-Bolt III [57080-302T]1 x Recknagel Weaver Bases - FFV Carl Gustaf 4000 [.-3042]1 x Recknagel Weaver Bases - FFV Carl Gustaf 1900 [.-3005]1 x Recknagel Weaver Bases - Winc. 70 Mag. <1964 [.-3095]1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Recknagel Grip Cap Domed Blank [24000-0400]1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x Contessa Quick Release Mount (Picatinny) for ATN X-Sight II1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Recknagel SOB01 Silencer (Standard Thread)1 x Recknagel Blank 12mm Eurorail - 150mm1 x ERATAC Backup Rear Sight for Picatinny [T0544-0355]1 x Contessa Lightweight Alloy Picatinny Mount for Docter Red Dot Sight1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (QD Lever)1 x Recknagel Front Sight Bead Red [11444-0300]1 x ERATAC UNI-Interface Picatinny Rail, 56mm [T0905-0008]1 x Contessa Picatinny Rail - CZ 452 / 455 (20 MOA)1 x Recknagel Front Sight Bead White [11442-0300]1 x LED Lenser Car Charger1 x Used Nightforce NP2-DD 8-32x56 Rifle Scope2 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x Contessa Quick Release Picatinny Rail1 x Contessa QD Ultra Low Blaser Mount for Pulsar Night Vision1 x Contessa 30mm Rings for Simple Black - 5.0mm (Med)1 x Contessa QD Low Mount for Yukon Photon Night Vision (Picatinny)1 x Contessa Picatinny Rail - Remington 700 Short (0 MOA)1 x K-80 Forward Position Trigger - Titanium1 x K-80 Forward Position Trigger - Gold Titanium1 x K-80 Standard Trigger - Titanium1 x Krieghoff Steel Middle Hanger (For Parcours)1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA)1 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x Contessa Spare Ring-to-Base Screws1 x Recknagel Zeiss Rail 70º Components - 4mm BH1 x Recknagel QD Sling Swivel Socket - Fixed Step, Raised [..-1020]1 x Recknagel QD Sling Swivel Socket - Slim Forearm [23100-5010]1 x Contessa Picatinny Rail - Merkel Helix (0 MOA)1 x Recknagel Weaver Bases - Anschutz 1780 [57080-302B]1 x Recknagel Detachable Sling Swivel 25.4mm Loop - 6mm Stud1 x ERATAC Picatinny Extended Riser Mount (Nut)1 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail1 x Contessa Remington 700 Short Euro Rail Base for QR Mount1 x Contessa Browning X-Bolt L Euro Rail Base for QR Mount1 x Krieghoff Classic "Big Five" Badge1 x Contessa Picatinny Rail - Remington 700 Long (20 MOA)1 x Contessa Remington 700 Long Euro Rail for QR Mounts1 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x Recknagel Picatinny Rail Sauer 202 Std, 20 MOA, Steel [..2080]1 x Recknagel Picatinny Bases - Remington 700 (6-48)1 x Contessa QD Extra Extended Front & Rear Picatinny Rail - Blaser1 x Contessa Tactical One Piece Fixed Picatinny Ring Mount - 30mm1 x Krieghoff "K" Collectors Badge1 x VFG Quick Clean Felts for .22 (Box of 80)1 x Recknagel Picatinny Rail Remington 700 L 20MOA, Steel [..2112]1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount1 x Krieghoff "K" Mesh Cap - Black1 x Recknagel Picatinny Rail Remington 700 L, Alu [..0112]1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x Recknagel Picatinny Rail Remington 700 L 20MOA, Alu [2112]1 x Contessa Sako 75/85 Medium Euro Rail for Quick Release Mount1 x Recknagel Extended Rail Remington 700 Long [57250-0112]1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)1 x Contessa Picatinny Rail - Remington 700 Long (0 MOA)1 x Contessa Sauer 202 Standard Euro Rail Base for QR Mount1 x Contessa Picatinny Rail - Sako 75/85 Long (20 MOA) Adjustable
Manufacturers
Useful Information