VFG Intensive Barrel Cleaning Felts for .44 (Box of 30)

£12.47
20% VAT incl.


  • Model:332031
VFG Barrel Intensive Cleaning Felts for .44
Code: (66857) 332031


These small felt screw-on pellets, which are calibre specific are used with the VFG Cleaning Rod to clean your barrel. The felts screw onto the cleaning rod tip and then passed down the barrel to give a smooth and effective clean. The super intensive felt wads are embedded with aggressive/coarse phosphor bronze fibres for proper cleaning that will not damage a steel airgun barrel. Ideal for .44 Mag calibres.

The .44 felts are recommended for the following calibres: .44 Mag Calibres
See which Felts suit your Calibre >>>

Supplied as small box containing:
30 intensive felt screw-on pellets

Instructions for Use:
1. Take Adapter and screw this onto VFG Cleaning rod No. 66889 (900 mm Long).
2. Screw a VFG felt cleaner onto the coarse thread of the adapter.
3. Place a second VFG felt cleaner onto the metric thread (used together a screw for the cleaning of shotguns)
4. Push the adapter with the two felts carefully through the barrel from the breech end and out of the muzzle. The special felts compress into the rifling and follow it exactly. The forward pellet removes the fouling out of the muzzle and by pulling back the rod, the dirty pellet drops off the metric thread, leaving the screwed pellet to polish the barrel by pushing the rod backwards and forwards.
5. If the barrel is to be oiled, screw VFG Rifle Cleaner onto the adapter, soak this thoroughly with weapon oil (Ballistol or Ustanol) and repeatedly move it back and forth in the barrel.
6. To remove the oil repeat steps 1 - 4.
7. In order to remove rubbed off metal, please use Intensive Cleaners.

Make sure that the barrel of your weapon is free after each cleaning operation.

See the VFG Barrel Cleaning Catalogue >>>

Also Available:
Small Box Quantities (Standard) Small Box Quantities (Intensive) Large Pack Quantities
4 - 4.5mm Standard Felts (100) 4 - 4.5mm Intensive Felts (100) 4 - 4.5mm Standard Felts (500)
.22 Standard Felts (80) .22 Intensive Felts (80) .22 Standard Felts (500)
6mm Standard Felts (50) 6mm Intensive Felts (50) 6mm Standard Felts (500)
6.5mm Standard Felts (50) 6.5mm Intensive Felts (50) 6.5mm Standard Felts (500)
7mm Standard Felts (50) 7mm Intensive Felts (50) 7mm Standard Felts (500)
7.5mm Standard Felts (50) 7.5mm Intensive Felts (50) 7.5mm Standard Felts (500)
8mm Standard Felts (50) 8mm Intensive Felts (50) 8mm Standard Felts (500)
9mm Standard Felts (40) 9mm Intensive Felts (40) 9mm Standard Felts (500)
9.3mm Standard Felts (40) 9.3mm Intensive Felts (40) 9.3mm Standard Felts (500)
.375 Standard Felts (40) .375 Intensive Felts (40) .375 Standard Felts (500)
10.3mm Standard Felts (30) 10.3mm Intensive Felts (30) N/A
.44 Standard Felts (30) .44 Intensive Felts (30) .44 Standard Felts (250)
.45 Standard Felts (30) .45 Intensive Felts (30) N/A


Features & Cleaning Instructions Video



You might also like...

2 x Bauer - One Piece Railmount 25.4mm (11mm High)2 x Bauer - Aluminium 11mm Dovetail 30mm Rings (14mm High)1 x Contessa Picatinny Rail - Savage Axis/Edge, Short (20 MOA)1 x Schultz & Larsen Torx Key for Scope Mounts1 x Recknagel Weaver Bases - Savage (Flat Back) [57080-3035]1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Contessa Spare Screw M10 for Anschutz/CZ Rails1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Black Barrel Case (83cm Internal)1 x Recknagel Weaver Bases - FFV Carl Gustaf 2000 [.-3028]1 x Recknagel Weaver Bases - Browning Mauser [..-3057]1 x Recknagel Weaver Bases - Browning X-Bolt [57080-301P]1 x Recknagel Weaver Bases - Browning Eurobolt [..-3078]1 x Contessa Lightweight Alloy Picatinny Mount for Docter Red Dot Sight1 x Recknagel Weaver Bases - FFV Carl Gustaf 1900 [.-3005]1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Contessa Picatinny Rail - Howa 1500 Long (10 MOA)1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)2 x Contessa QD Extra Extended Rear Picatinny Rail - Blaser2 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser1 x Contessa QD Both Extended Picatinny Rails Mount for Blaser2 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Contessa Picatinny Rail - Howa 1500 Short (10 MOA)1 x Contessa Picatinny Rail - Haenel Jager 10 (0 MOA)1 x Contessa Picatinny Rail - Winchester 70 Long (20 MOA)1 x Gerber Myth Series Fixed Saw1 x Contessa Picatinny Rail - CZ 527 (20 MOA)1 x Contessa Picatinny Rail - Tikka T3 / T3X (10 MOA)1 x Contessa Picatinny Rail - CZ 527 (0 MOA)1 x Contessa Picatinny Rail - CZ 550 Magnum (20 MOA)1 x Contessa Picatinny Rail - CZ 550 Standard (20 MOA)1 x Contessa Picatinny Rail - Sauer 100/101 (0 MOA)1 x Contessa Picatinny Rail - CZ 452 / 455 (10 MOA)1 x Contessa Picatinny Rail - CZ 550 Standard (0 MOA)1 x Contessa CZ 550 Euro Rail for Quick Release Mount1 x Recknagel Weaver Bases - Sabatti Express [..-301K]1 x Contessa Picatinny Rail - Sauer 90 (0 MOA)1 x Recknagel Picatinny Rail Tikka T3 / T3X, 20 MOA, Alu [..2081]1 x Contessa Picatinny Rail - Sauer 100/101 (20 MOA)1 x Contessa Picatinny Rail - Sabatti Rover Long (0 MOA)1 x Recknagel Picatinny Rail Sabatti Rover Long, Alu [..0175]1 x Contessa Picatinny Rail - Sabatti Rover Long (10 MOA)1 x Ex-Demo Briley Choke Tube, K-80 Parcours - FULL (01)1 x Contessa Picatinny Rail - CZ 550 Magnum (0 MOA)1 x ERATAC 30mm Ring with UNI-Interface [03680-5730]1 x Bauer ED 8x32 Binoculars1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)2 x Contessa Picatinny Rail - Anschutz 54/64 (20 MOA)1 x Contessa Anschutz 54 Euro Rail Base for Quick Release Mount1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Recknagel Replacement Polyform Lever [00088-5700]
Manufacturers
Useful Information