VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)

£8.74
20% VAT incl.


  • Model:331999
VFG Barrel Intensive Cleaning Felts for .22
Code: (66817) 331999


These small felt screw-on pellets, which are calibre specific are used with the VFG Cleaning Rod to clean your barrel. The felts screw onto the cleaning rod tip and then passed down the barrel to give a smooth and effective clean. The Intensive felt wads are embedded with aggressive/coarse phosphor bronze fibres for proper cleaning that will not damage a steel airgun barrel

The .22 felts are recommended for the following calibres: .22 lfb, .22 kurz, .22 WMR, .22 Hornet, .222 Rem., .223, .224, 5,6.
See which Felts suit your Calibre >>>

Supplied as small box containing:
80 Intensive felt screw-on pellets

Instructions for Use:
1. Take Adapter and screw this onto VFG Cleaning rod No. 66889 (900 mm Long).
2. Screw a VFG felt cleaner onto the coarse thread of the adapter.
3. Place a second VFG felt cleaner onto the metric thread (used together a screw for the cleaning of shotguns)
4. Push the adapter with the two felts carefully through the barrel from the breech end and out of the muzzle. The special felts compress into the rifling and follow it exactly. The forward pellet removes the fouling out of the muzzle and by pulling back the rod, the dirty pellet drops off the metric thread, leaving the screwed pellet to polish the barrel by pushing the rod backwards and forwards.
5. If the barrel is to be oiled, screw VFG Rifle Cleaner onto the adapter, soak this thoroughly with weapon oil (Ballistol or Ustanol) and repeatedly move it back and forth in the barrel.
6. To remove the oil repeat steps 1 - 4.
7. In order to remove rubbed off metal, please use Intensive Cleaners.

Make sure that the barrel of your weapon is free after each cleaning operation.

See the VFG Barrel Cleaning Catalogue >>>

Also Available:
Small Box Quantities (Standard) Small Box Quantities (Intensive) Large Pack Quantities
4 - 4.5mm Standard Felts (100) 4 - 4.5mm Intensive Felts (100) 4 - 4.5mm Standard Felts (500)
.22 Standard Felts (80) .22 Intensive Felts (80) .22 Standard Felts (500)
6mm Standard Felts (50) 6mm Intensive Felts (50) 6mm Standard Felts (500)
6.5mm Standard Felts (50) 6.5mm Intensive Felts (50) 6.5mm Standard Felts (500)
7mm Standard Felts (50) 7mm Intensive Felts (50) 7mm Standard Felts (500)
7.5mm Standard Felts (50) 7.5mm Intensive Felts (50) 7.5mm Standard Felts (500)
8mm Standard Felts (50) 8mm Intensive Felts (50) 8mm Standard Felts (500)
9mm Standard Felts (40) 9mm Intensive Felts (40) 9mm Standard Felts (500)
9.3mm Standard Felts (40) 9.3mm Intensive Felts (40) 9.3mm Standard Felts (500)
.375 Standard Felts (40) .375 Intensive Felts (40) .375 Standard Felts (500)
10.3mm Standard Felts (30) 10.3mm Intensive Felts (30) N/A
.44 Standard Felts (30) .44 Intensive Felts (30) .44 Standard Felts (250)
.45 Standard Felts (30) .45 Intensive Felts (30) N/A


Features & Cleaning Instructions Video



You might also like...

1 x ERATAC 34mm One Piece Extended Ring Mount (Nut)1 x Anschütz Biathlon Harness2 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x AimZonic Plus Camo Sound Moderator1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x ERATAC Picatinny to Harris Bipod Adaptor, Stud (Lever)1 x ERATAC 30mm One Piece Extended Ring Mount (Lever)2 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x ERATAC Ultra Lightweight Extended One Piece Ring Mount1 x ERATAC Two-Piece Picatinny Rings (Lever)1 x ERATAC 34mm One Piece Extended Ring Mount (Lever)1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x ERATAC Ultra Lightweight One Piece Ring Mount2 x ERATAC Picatinny Extended Riser Mount (Nut)1 x Jones Thru-the-Pad Adjuster1 x Jones Original Pad Adjuster2 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x ERATAC Picatinny to Harris Bipod Adaptor, Sliding Block (Lever)1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Recknagel SOB3D Silencer (Standard Thread)1 x ERATAC Backup Front Sight for Picatinny, 1.35mm [T0543-0355]1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x ERATAC Offset UNI-Interface Picatinny Rail [T0913-0000]1 x MSA Sordin - Hygiene Kit - Foam Seals1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]2 x Recknagel Stock Shield - 2 Point Shield Contoured2 x ERATAC UNI-Interface Picatinny Rail, 85mm [T0908-0013]3 x Recknagel Grip Cap Skeleton Pointed [24060-0200]2 x EX Demo - Gerber Steady Tool (Phone Tripod)1 x Recknagel Detachable Magnum Sling Swivel 25.4mm Loop - 8mm Stud2 x Gerber New Myth Series Pocket Folder1 x Recknagel Zeiss Rail 70º Components - 4mm BH2 x Bear Grylls Basic Survival Kit by Gerber1 x Gerber Octane Multi-Tool Red3 x Recknagel Grip Cap Skeleton Rounded [24060-0100]2 x Recknagel Grip Cap Skeleton Domed [24060-2100]1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (QD Lever)1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Recknagel SECURA Safety for Remington 700 [30170-1200]1 x Recknagel Replacement Polyform Lever [00088-5700]1 x WalkStool Spare Leg Joints1 x Recknagel Adaptor for Thermal and Night Vision Devices - 62mm2 x Contessa Picatinny Rail - Merkel Helix (0 MOA)1 x WalkStool Set of Spare Red Spring1 x Recknagel Zeiss Rail 45º Components - 6mm BH1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)2 x Recknagel Grip Cap Compartment1 x Recknagel Weaver/Picatinny Mount for Aimpoint Micro [57020-1200]1 x Silva Dine Duo Kit - Purple/White2 x Recknagel Stock Shield - 2 Point Shield Flat1 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)1 x Winchester 3" Folding Knife1 x ERATAC 30mm Ring with UNI-Interface [03680-5730]1 x Recknagel Weaver Bases - Winc. 70 Mag. <1964 [.-3095]1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]3 x ERATAC 56mm Ring with UNI-Interface [03680-5757]1 x LED Lenser Intelligent Filter Set with Holster1 x Silva Dine Duo Kit - Turquoise/White1 x Ex-Demo Contessa One Piece QD Picatinny Mount Body1 x ERATAC ACI Bubble Level [T0940-0000]1 x Recknagel Barrel Banded Front Ramp [12530-....]1 x Recknagel Adaptor for Thermal and Night Vision Devices - 30mm1 x Contessa Picatinny Rail - Remington 700 Long (20 MOA)1 x Recknagel Steel Stock Trap Door1 x Contessa Picatinny Rail - Remington 700 Short (0 MOA)1 x Contessa Picatinny Rail - Remington 700 Long Extended (0 MOA)1 x Recknagel Grip Cap Domed Blank [24000-0400]1 x Recknagel Picatinny Rail Remington 700 L 20MOA, Steel [..2112]1 x Recknagel Extended Rail Remington 700 Short [57250-0012]1 x Contessa Picatinny Rail - Roessler Titan 3 / 6 (20 MOA)2 x Recknagel Grip Cap Full Domed [24000-0100]1 x Recknagel Picatinny Rail Remington 700 L, Steel [..0112]1 x Contessa Picatinny Rail - Roessler Titan 3 / 6 (10 MOA)1 x Recknagel Safety for Mauser K98 [30100-5000]1 x Recknagel Picatinny Rail Sako Long, Alu [..0114]1 x ERATAC 25.4mm Ring with UNI-Interface [03680-5726]1 x ERATAC Offset Picatinny to UNI-Interface Adaptor [T0530-0000]1 x Contessa Picatinny Rail - Anschutz 54/64 (20 MOA)1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA) Extended1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (20 MOA)1 x Recknagel Picatinny Rail Steyr-Mannlicher (Old) M, Alu [..0051]1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Recknagel SECURA Sling Swivel - 20mm Wide - 6mm [22009-1000]
Manufacturers
Useful Information