Krieghoff Barrel / Stock Stickers

£2.50
20% VAT incl.

Available Options

  • Model:BARREL-STICKER
Krieghoff Barrel / Stock Stickers
Available in Gold, Silver or White.

These high quality vinyl sticker with the "Krieghoff" text logo are designed to be transferred to your Krieghoff Barrels or Stock.

The stickers come as a set of two. So you can attach one either side of your barrels, or attach one to your barrel and one to your stock.

Size: 149mm x 17.5mm
Choose your colour from the drop-down menu above.

How to Apply your Stickers

Step 1 - Prepare It
Lay your sticker on a clean and flat surface with the backing tape (white side) face down and rub over the application tape (clear side) with your squeegee or credit card to ensure the application tape has a good bond to the vinyl letters.

Step 2 - Peel It
Check the positioning of where your sticker will go, so you're ready for the next stage.
Next, peel the application tape (clear side) away from the backing paper (white side). Your sticker letters will now be held by the application tape.
Carefully place the the application tape on to your barrels. Check the alignment as you place it down.

Step 3 - Rub It
While your sticker in laying on your barrels in position, start by rubbing over the application tape and letters gently, and then increase the pressure and firmly rub with your squeegee or credit card. Make sure you cover each letter thoroughly.

Step 4 - Remove It
Carefully peel away the application tape at an angle and corner to corner. The letters should all be transferred onto your barrel. If they are still attached to the application tape, lay the application tape back down and rub over the letter again with the squeegee or credit card. Now, try again until the whole sticker has been transferred.
Your new Krieghoff Barrel / Stock Sticker should now be in place and ready to show off.
If your letters are not coming away from the application tape as you're peeling the application tape off, lay the application tape back over the letter and use the squeegee to rub over the letter again.

Sticker Removal
If you decide to remove the stickers for any reason. Use some light heat such as a hair dryer to aid the removal. The adhesive is permanent but will not damage or mark your barrels. Do not use any abrasive materials or solvents to remove the stickers as this may cause damage to the finish of your barrels.

Postage
We send the Krieghoff Barrel & Stock Stickers with a piece of card to prevent the stickers from being damaged in transit.



You might also like...

3 x Recknagel Fibre Optic Front Sight Bead 8.5mm [11022-2585]1 x VFG Barrel Cleaning Felts for 9.3mm (Box of 500)2 x Krieghoff Pro Choke Box1 x Krieghoff "K" Mesh Cap - Black1 x K-80 Barrel Weight Balance System2 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)2 x VFG Barrel Cleaning Felts for .45 (Box of 30)1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint2 x Schmierfix Grease by Liqui Moly2 x VFG Intensive Barrel Cleaning Felts for .45 (Box of 30)1 x Schultz & Larsen T-Handle Wrench (4mm Hex)2 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Krieghoff Trigger Screw2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount2 x Krieghoff HIVIZ Pro Sights1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Krieghoff Spares Kit1 x Krieghoff Navy Canvas Gun Slip2 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)2 x Krieghoff Brass Front Sight Bead1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)2 x VFG Barrel Cleaning Felts for 8.5mm (Box of 500)3 x VFG Pull Through Pocket Set for .22 Upwards1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x VFG 1 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x VFG Barrel Cleaning Felts for .375 (Box of 500)1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x VFG 3 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)2 x VFG Pull Through Match Pocket Set, for 4-4.5mm1 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x VFG Barrel Cleaning Felts for 10.3mm (Box of 30)1 x VFG Barrel Cleaning Felts for .375 (Box of 40)1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)2 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)2 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x VFG Barrel Cleaning Felts for 7mm (Box of 500)1 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x VFG Barrel Cleaning Felts for .44 (Box of 30)2 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Complete Set for .1772 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x VFG 1 Piece Steel Short Cleaning Rod with 4-4.5mm (.177) Adaptor2 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor1 x VFG 3 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x ERATAC Bubble Level [T0940-0002]1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Teague Precision Choke Key1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Recknagel Replacement Polyform Lever [00088-5700]1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint2 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Ebony & Brass 20 Bore Snap Caps1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Black Leather Shell/Cartridge Pouch1 x Black Barrel Case (83cm Internal)2 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Custom Rifles of Great Britain by Bruce Potts2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Starkie Blue (A.K.A Smurf Poo)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)4 x Parker Hale Thread to 8-32 Thread Converter1 x VFG Magnetic Felt Clamps for Vices - 100mm1 x VFG Magnetic Felt Clamps for Vices - 125mm2 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x VFG Barrel Cleaning Felts for 9mm (Box of 40)1 x VFG Magnetic Felt Clamps for Vices - 150mm1 x Schultz & Larsen Take Down Rifle Case1 x VFG Magnetic Felt Clamps for Vices - 80mm1 x VFG Wipe Length Stopper & Guide - Shotgun2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x VFG Intensive Barrel Cleaning Felts for 6.5mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for 8mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for 16 Bore (Box of 25)1 x VFG Intensive Barrel Cleaning Felts for .375 (Box of 40)2 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 100)1 x VFG Intensive Barrel Cleaning Felts for 9.3mm (Box of 40)1 x VFG Intensive Barrel Cleaning Felts for .44 (Box of 30)1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x VFG Intensive Barrel Cleaning Felts for 7mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for 10.3mm (Box of 30)1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x Briley 20b Speed Wrench - For Krieghoff1 x VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)2 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 25)2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x AimZonic Plus Camo Sound Moderator1 x VFG Adaptor fits Pro Shot Cleaning Rods (8-32 Thread)1 x VFG Adaptor for Parker Hale English Rods (over 7mm)1 x VFG Adaptor for VFG Rods (Spare)1 x VFG Adaptor from M5 to 1/8" Aluminium1 x VFG Brass Adaptor for VFG Rod 4-4.5mm (Spare)1 x VFG Adaptor fits J. Dewey Cleaning Rods (8-32 Thread)1 x VFG Adaptor fits Tipton Cleaning Rods (8-32 Thread)2 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x VFG Adaptor fits Tetra Cleaning Rods (8-32 Thread)1 x VFG Adaptor for US Rods 7-32 UNC (.22 and Over)2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm2 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x VFG Adaptor for VFG Rods Brass1 x AimZonic Compact Camo Sound Moderator1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)2 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x WalkStool Spare Leg Joints1 x WalkStool Comfort 65 (65cm/26in)1 x WalkStool Set of Spare Red Spring1 x Walkstool Steady1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Recknagel SOB3D Silencer (ERA LOC)1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x Recknagel SOB3D Silencer (Standard Thread)1 x Bauer Outdoor 8x21 Binoculars1 x Bauer Outdoor 10x25 Binoculars1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Jones Thru-the-Pad Adjuster1 x Bauer HD Series 8x25 Binoculars1 x Schultz & Larsen Professional Bipod by Spartan1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Jones Gun Nut Kit1 x VFG Barrel Cleaning Felts for 9mm (Box of 500)1 x Anschütz Biathlon Harness1 x AG3 / 392A Alkaline Batteries (10 Pack)1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x MSA Sordin - Hygiene Kit - Foam Seals1 x Krieghoff "K" Collectors Badge1 x Krieghoff 2009 Badge (Collectors Badge)1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Krieghoff "K" Logo Cap Black & White1 x Krieghoff Woven Fabric Patch1 x Krieghoff Achievement Badge 100/3001 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x Hi Viz - How to Become a Better Shooter1 x Krieghoff Sight Bead Blanking Screw1 x Krieghoff 2013 Badge (Collectors Badge)
Manufacturers
Useful Information